Badger Basket 97745 Gray Woodgrain Quick setup guide

1.0/0119/TG
Three Bin Stackable
Storage Cubby
Assembly and Use Instructions. Adult Assembly Required.
Read all instructions before use. This manual is part of the product
and must be saved for future reference.
Badger Basket®, PO Box 227, Edgar, WI 54426-0227 USA • Web: www.badgerbasket.com
U.S. Based Customer Service Toll-Free (Mon-Thurs 7:00 AM-4:00 PM CST): 1-800-236-1310
Phone: [phone] • Fax: [phone]
FOR REPLACEMENT PARTS:
http://www.badgerbasket.com/parts
NOTE: Three Bin models can be
stacked/used with Two Bin Models
and/or Shelf Cubby with Three Basket
Models (each sold separately -
refer to our web site
for additional colors/models available).
VERSION CODE*:
1.0/0119/TG
* Model and Version numbers are needed
if replacement parts are requested
MODEL NUMBER*:
97745 - Gray Woodgrain

1.0/0119/TG
USE AND CARE INSTRUCTIONS:
Wipe storage unit clean with a damp cloth and mild soap as needed. Dry thoroughly.
BEFORE YOU BEGIN ASSEMBLY:
Check all parts. If anything is missing or not
satisfactory, please DO NOT call the store
or return the product to them. Please go online to:
http://www.badgerbasket.com/parts
Most problems are resolved
without you needing to leave home.
When emailing or calling us, please have this
instruction manual, your product model number,
and your Version Code ready.
Your Model Number is: 97745
Your Version Code is: 1.0/0119/TG
WARNING
ADULT ASSEMBLY REQUIRED
DUE TO THE PRESENCE OF SMALL PARTS AND SHARP
POINTS DURING ASSEMBLY, KEEP OUT OF REACH OF
CHILDREN UNTIL ASSEMBLY IS COMPLETE.
READ ALL INSTRUCTIONS before use of this product.
Keep instructions for future use. Use only the parts and hardware
provided by Badger Basket®. Do not use the product if it is damaged, broken, or
missing parts. DO NOT allow anyone to climb, sit on, stand on, or play on or inside of this
product. It is not a seat, step stool, or ladder. Periodically check to make sure all the
hardware remains tight. No product is a replacement for adult supervision.
Multiple Cubbies/Bins can be stacked on top of, or next to, each other to expand your
storage capacity. When stacking multiple units (sold separately), you MUST secure the
units to each other (hardware included) for stability and safety. If additional brackets
and screws are needed, please contact Badger Basket.
If stacking more than 42 inches (107 cm) high, we recommend that you also
secure the units to the wall (hardware not included).
WARNING - FAILURE TO FOLLOW THESE
WARNINGS AND THE INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY OR DEATH

L
L
L
L
L
L
I
I
I
A
B
B
G
A
D
H
M×2
I×18
K×4 L×18
J×2
EF G
B×2 C
I×6L×6
1
RIGHT MIDDLE LEFT
FRONT TRIM
FRONT BACK BOTTOM
TOP
LARGE SCREW WOOD PEG
MEDIUM SCREW PLASTIC INSERT
NOTE: MAKE SURE THAT THE GROOVES ON PARTS (A), (B),
AND (G) LINE UP BEFORE YOU TIGHTEN THE SCREWS.THE GROOVES
MUST LINE UP SO THAT THE BACK (H) WILL，
FIT AND THE TOP (F) WILL ATTACH PROPERLY IN STEP 3.
M-The bracket is optional and is used to attach your
TWO Bin Storage Cubby to another storage cubby if needed
（cubbies are each sold separately).Refer to the safety
information on Page 2 and also Diagram 5.
TOOL REQUIRED
(NOT INCLUDED)
N×4
SMALL SCREW

K
K
K
K
L
L
I
I
I
I
K×4
I×4L×4
I×2
3
2
J
J
E
C
F
D

I
I
I
I×8L×8
4
L
H
LL
L
LL
L
L
I
I
I I
5THIS STEP IS OPTIONAL AND IS USED IF YOU PURCHASED MULTIPLE BINS
(EACH SOLD SEPARATELY) AND MUST ATTACH THEM TOGETHER REFER TO
THE SAFETY INFORMATION ON PAGE 2.
NM
N