Badger Basket 09140 User manual

1.0/1007/TG
MODEL NUMBERS:
09140 - White
09141 - Walnut
09142 - Cherry
Visit us online at www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
Web: http://www.badgerbasket.com/parts • E-mail: part[email protected]
PLANT AND GENERAL OFFICE: PO Box 227, Edgar, WI 54426-0227 • Phone: [phone] • Fax: [phone]
Page 1 of 7
STORAGE UNIT TOP
WITH CURTAINS
Assembly
Instructions.
Adult Assembly
Required.
Save these
instructions for
future use.

1.0/1007/TG
Page 2 of 7
READ ALL INSTRUCTIONS before use of this product. Keep instructions for future use. Use only the
parts and hardware provided by Badger Basket. Do not use the product if it is damaged or broken.
DO NOT allow any children to climb or play on or inside of this product.
Periodically check to make sure all the screws remain tight.
If attaching a Storage Unit Base with Curtains (Models 09130, 09131, and 09132; sold separately) to
the Storage Unit Top with Curtain (Models 09140, 09141, and 09142), you MUST secure the units to
each other (hardware included) for stability and safety.
WARNING - FAILURE TO FOLLOW THESE WARNINGS
AND THE INSTRUCTIONS COULD RESULT IN
SERIOUS INJURY OR DEATH
BEFORE YOU BEGIN ASSEMBLY:
Check all parts and hardware.
If anything is missing or not satisfactory,
please DO NOT call Wal-Mart.com or return the product to them.
Contact Badger Basket for assistance.
Most problems are resolved without you needing to leave home.
When emailing or calling us, please have this instruction manual
and your product model number ready.
For fastest service, go to
http://www.badgerbasket.com/parts
USE AND CARE INSTRUCTIONS:
Wipe clean with a damp cloth and mild soap as needed.

Ax1 Bx1 Cx2
Dx1 Ex1 Fx2
Gx1 Hx2 Ix2
Jx2 Kx12 Lx10
4x30mm 4x20mm
Mx8
4x45mm
LEFT SIDE PANEL RIGHT SIDE PANEL
FABRIC CURTAINS
SHELF PINS
4x30mm SCREWS 4X20mm SCREWS
BA CK P ANE L
SHELF PANELS
4x45mm SCREWS
CURTAIN ROD
TOOL REQUIRED
(not included)
VERTICAL POST
TOP AND BOTTOM PANELS
HORIZONTAL POST
BRACKET
N 1x
The bracket is optional and
is used to attach your Storage
Unit Top (Models 09140, 09141,
and 09142) to the Storage Unit
Base (Models 09130, 09131, and
09132). Base unit is sold
separately. See Diagram 7.
1.0/1007/TG
Page 3 of 7

1.0/1007/TG
Page 4 of 7
①
G
H
②
4x3 0 m m
Kx8
K
A
B
C
C
H
K
K
K
K
K
K
K
BE SURE THE HOLES FOR THE
CURTAIN RODS ARE FACING THE
INSIDE OF THE UNIT AND THAT
THE ROD IS SECURE IN THE HOLES
OF PARTS A AND B.

1.0/1007/TG
Page 5 of 7
③
D
E
Jx2
4x45mm
J
J
4x30mm
Kx4
K
K
④
F
F
4x20mm
Lx8
L
L
L
L
LLLL
USE EIGHT OF PART
L TO ATTACH THE BACK
PANELS (PARTS F) TO
THE TOP AND BOTTOM
PANELS (PARTS C)

⑤
Mx8
M
M
M
M
M
M
M
M
I
I
⑥
1.0/1007/TG
Page 6 of 7
PART M SHELF PINS MAY BE
INSERTED AT WHICHEVER SHELF
POSITIONS YOU DESIRE,AND
THEY CAN BE REMOVED AND
REINSERTED TO CHANGE THE
POSITIONS OF THE SHELVES AT
ANYTIME.

⑦
1.0/1007/TG
Page 7 of 7
Lx4
L
LL
L
N
N
IF YOU ALSO PURCHASED A STORAGE UNIT BASE
(MODELS 09130, 09131 and 09132 - SOLD
SEPARATELY), PLEASE USE PART N BRACKETS AND
PART L SCREWS TO SECURE THE TOP AND BOTTOM
UNITS TOGETHER AS SHOWN. THIS IS REQUIRED
FOR YOUR SAFETY.