Balkene Home Greenwich 63965 User manual

GREENWICH COLLECTION
MEDIA CONSOLE
Item#: 63965
sAve these instructions
for future reference.
AttAch Your receiPt here
Keep a copy of your proof of purchase or order
conrmation which will be needed if you need to
contact us about warranty coverage.
Purchase Date:
Questions, problems, missing parts?
Before returning to your retailer, our Florida-based customer service team is available.
Call toll-free [phone] 9 a.m. – 9 p.m., EST
Email
Live chat
[email protected]
www.balkenehome.com 9 a.m. – 6 p.m., EST, Monday – Friday
06032021

Contact us for assistance: [phone] | www.balkenehome.com 2
inforMation
Before You BeGin
General inforMation
This item is made of hollow board and a metal frame. For safe assembly, set up on a dry, soft, secure and
clean surface. Do not clean with detergent or chemicals. Do not sit or stand on the unit. Do not place hot
items such as coffee cups directly on the surface of this item. Keep away from direct sunlight and water.
Do not drag the unit. For indoor use only.
safetY inforMation
WARNING
DO NOT sit or stand or allow children to sit or stand on the assembled product. Make sure connectors are
securely in place. Perform periodic checks to make sure the connectors are secure and adjust if needed.
Keep unassembled parts and hardware away from children and infants. This package contains small parts
and sharp points. Adult assembly required.
CAUTION
READ all instructions before beginning assembly. Failure to do so may result in faulty assembly and
potential injury. Assemble the item on a soft, non-abrasive surface such as carpet or cardboard to avoid
damaging the item.
Max safe load limit: 20 KG / 44 LB. per shelf.
Before beginning assembly, make sure all parts are present. Compare parts received with the “Parts
List.” If any part is missing or damaged, do NOT attempt to assemble the product. Please read and
understand this entire manual before attempting to assemble, operate or install this product. If you
have any questions regarding the product, please contact Customer Service:
Call toll-free 9 a.m. – 9 p.m., EST
Email
Live chat
[phone]
[email protected]
www.balkenehome.com 9 a.m. – 6 p.m., EST, Monday – Friday

Contact us for assistance: [phone] | www.balkenehome.com 3
Parts list
Part descriPtion QTY
ALeft Side 1
BRight Side
CTop Shelf
DMiddle Shelf
1
Cam Bolt
Qty: 16
HARDWARE CONTENTS
C
F
K
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts
are missing, please contact Customer Service.
Place all parts on a soft, level surface for assembly. Estimated Assembly Time: 20 Minutes
DO NOT OVER-TIGHTEN HARDWARE!
YOU WILL NEED FOR ASSEMBLY (not included): Rubber Mallet* Phillips-head Screwdriver
*If none is available, use a hammer, but add padding as necessary to protect parts and surfaces.
2
Cam Lock Nut
Qty: 16
3
Dowel
Qty: 23
4
Medium Screw
4x35mm
Qty: 5
5
Large Screw
4x45mm
Qty: 6
6
Foot Pad
Qty: 4
J
D
H
I
B
A
G
EI
L
1
1
1
EBottom Shelf
FTop Divider
1
1
GBottom Divider
HUpper Shelf Face
1
1
IMiddle/Lower Shelf Face
J
2
1
K1
Upper Shelf Backer
Lower Shelf Backer
L1
Support Leg

Contact us for assistance: [phone] | www.balkenehome.com 4
ASSEMBLY
1
2Place the Middle Shelf D upside-down on a soft
surface. On one of the Middle/Lower Shelf Faces I,
insert a Dowel 3 into the hole midway between the 2
Cam Bolts installed in Step 1. ASSEMBLY NOTE: You
may need to tap gently with a rubber mallet to fully
seat Dowels.
Join the Shelf Face to the front edge of the Middle Shelf
as shown (Shelf Face should form a lip toward the
bottom side of the Shelf), by inserting the hardware of
the Shelf Face into the holes in the edge of the Shelf.
Fasten by inserting a Cam Lock Nut 2 (with arrow
pointed toward edge) into the hole adjoining each Cam
Bolt, then turning the Cam Lock Nuts clockwise until
secure.
3Attach the Top Divider F to the Middle Shelf D by
inserting 2 Dowels 3 into the bottom edge of the
Divider then inserting those into the top of the Shelf as
shown.
To secure, insert 2 Medium Screws 4 through the
indicated holes in the bottom of the Shelf and into the
Divider. Tighten using a Phillips-head screwdriver.
Hardware Used: 1 Cam Bolt x 12
6 Foot Pad x 4
Hardware Used: 2 Cam Lock Nut x 2
3 Dowel x 1
On a soft, nonabrasive surface, place the Left Side A,
Right Side B, and both Middle/Lower Shelf Faces I
with the inside of each facing up. Insert the threaded
ends of a Cam Bolt 1 into each of the holes indicated
in the diagram (4 per Side and 2 per Shelf Face). Use a
Phillips-head screwdriver to tighten each Cam Bolt
until its threads are fully inserted.
Peel the paper from each Foot Pad 6 and apply the
adhesive side firmly to the feet of each Side.
11
1
1
1
1
1
1
1
1
A
B
I x2
I
D
2
2
A
B
C
3
2
F
D
3
4
Hardware Used: 3 Dowel x 2
4 Medium Screw x 2

Contact us for assistance: [phone] | www.balkenehome.com 5
ASSEMBLY
4
5
6
2
Place the Bottom Shelf E upside-down on a soft surface. On the
remaining Middle/Lower Shelf Face I, insert a Dowel 3 into
the hole midway between the 2 Cam Bolts installed in Step 1.
Join the Shelf Face to the front edge of the Lower Shelf as shown
(Shelf Face should form a lip toward the bottom side of the
Shelf), by inserting the hardware of the Shelf Face into the holes
in the edge of the Shelf. Fasten by inserting a Cam Lock Nut 2
(with arrow pointed toward edge) into the hole adjoining each
Cam Bolt, then turning the Cam Lock Nuts clockwise until
secure.
Attach the Support Leg L to the bottom of the Lower Shelf by
aligning the hole in one end with the hole in the center of the
Shelf, then inserting a Large Screw 5 through the top of the
Shelf and into the Support Leg. Tighten securely using a Phillips-
head screwdriver.
Hardware Used: 2 Cam Lock Nut x 2
3 Dowel x 1
4 Medium Screw x 1
2
3
E
I
L
4
G
E
3
4
4
Attach the Bottom Divider G to the Bottom Shelf E by
inserting 2 Dowels 3 into the bottom edge of the
Divider then inserting those into the top of the Shelf as
shown.
To secure, insert 2 Medium Screws 4 through the
indicated holes in the bottom of the Shelf and into the
Divider. Tighten using a Phillips-head screwdriver.
Hardware Used: 3 Dowel x 2
4 Medium Screw x 2
D
E
1
F
G
2
Insert and tighten a Cam Bolt 1 into each of the 2
indicated holes in the bottom of the Middle Shelf D.
Slide the Bottom Divider G onto the Cam Bolts.
Fasten by inserting a Cam Lock Nut 2 (with arrow
pointed toward edge) into the hole adjoining each
Cam Bolt, then use a Phillips-head screwdriver to
turn the Cam Lock Nuts clockwise until secure.
Hardware Used: 1 Cam Bolt x 2
2 Cam Lock Nut x 2

Contact us for assistance: [phone] | www.balkenehome.com 6
ASSEMBLY
7
8
9
Attach the Left Side A to the assembled Shelves: insert
Dowels 3 into each of the 3 pairs of holes on the inside
front leg of the Left Side. Slide the Dowels and the
previously-installed Cam Bolts into the corresponding
holes in the left edge of each Middle/Lower Shelf Face I
and into the left edge of the Upper Shelf Face H.
Hardware Used: 2 Cam Lock Nut x 4
3 Dowel x 6
E
2
D
H
A
Secure the Left Side to the Shelves by inserting a
Cam Lock Nut 2 (with arrow pointed toward edge)
into the indicated holes on the underside of the
shelves adjoining each Cam Bolt, then turning the
Cam Lock Nuts clockwise until secure.
E
D
H
K
Slide the Lower Shelf Backer K into the grooves at the
rear of Shelves D/E. Be sure to slide it all the way into
the vertical groove in the inside of the Left Side A.
Attach the Right Side B to the assembled Shelves: insert
Dowels 3 into each of the 3 pairs of holes on the inside
front leg of the Left Side. Slide the Dowels and the
previously-installed Cam Bolts into the corresponding
holes in the right edge of each Middle/Lower Shelf Face
I and into the right edge of the Upper Shelf Face H.
Hardware Used: 2 Cam Lock Nut x 4
3 Dowel x 6
Secure the Right Side to the Shelves by inserting a
Cam Lock Nut 2 (with arrow pointed toward edge)
into the indicated holes on the underside of the
Shelves adjoining each Cam Bolt, then turning the
Cam Lock Nuts clockwise until secure.
BE
2
2
2
2
3
2
2
3
3
3
3
3

Contact us for assistance: [phone] | www.balkenehome.com 5
ASSEMBLY
10 Place the Top Shelf C upside-down on a soft
surface. Insert and tighten Cam Bolts 1 into
the 2 indicated holes near the center of the
Shelf.
Hardware Used: 2 Cam Lock Nut x 2
3 Dowel x 5
5 Large Screw x 6
Insert a total of 5 Dowels 3 into the indicated
holes in the top edge of the Left/Right Sides A/B
and the middle of the Upper Shelf Face H.
Slide the Upper Shelf Backer J into the grooves at
the rear of the Left/Right Sides.
Lower the Top Shelf onto the partially-assembled
unit by inserting the Cam Bolts into the Top
Divider F while sliding the Dowels into the
corresponding holes in the underside of the Top
Shelf.
Fasten the Cam Bolts by inserting a Cam Lock Nut
2 (with arrow pointed toward top edge) into the
holes in the side of the Top Divider adjoining each
Cam Bolt, then turning the Cam Lock Nuts
clockwise until secure.
Insert 6 Large Screws 5 through the Left/Right
Sides and Upper Shelf Face upwards into the
underside of the Top Shelf. Tighten securely using
a Phillips-head Screwdriver.
Hardware Used: 1 Cam Bolt x 2
11
C
1
1
C
3
3
5
5
5
5
5
J
2
B
Check that all hardware is firmly tightened.
Your Greenwich Media Console is ready for use!

LIMITED WARRANTY
Customers in the Contiguous US
With proof of purchase from an authorized retailer, this product is warranted
for a period of 1 year from original purchase date against defects in materials
and workmanship under normal use. This warranty does NOT cover normal
wear/weathering, exposure to water, freezing temperatures, oils, fluids, or
chemicals OR use in a commercial context if the unit is not designated as a
commercial model. At Balkene Home’s sole discretion, products under
warranty will be repaired and/or replaced at no charge to the customer.
Returns sent back to Well Traveled Living must be sent via prepaid freight in
the original retail packaging.
For warranty service, contact Balkene Home at the address, phone numbers
or website and email listed in this owner’s manual. Be sure to have your sales
receipt, date of purchase and catalogue/model numbers available when
calling. All warranty service will be coordinated by Balkene Home's Amelia
Island, Florida service center. This warranty is extended only to the original
owner. Proof of purchase will be required before warranty service is
rendered. The sales receipt is the only valid proof of purchase. This warranty
only covers failures due to defects in materials or workmanship which occur
during normal use. Failures and/or damage which result from accident,
negligence, misuse, abuse, neglect, mishandling, alteration or modification,
failure to maintain, improper assembly or maintenance, service by
unauthorized agency or use of unauthorized components or damage that is
attributable to acts of God are NOT covered.
This limited warranty gives you specific legal rights and you may also have
other rights which vary from jurisdiction to jurisdiction. The provisions of the
United Nations Convention on Contracts for the Sales of Goods shall not apply
to this limited warranty or the sale of products covered by this limited
warranty.
• THERE ARE NO EXPRESS WARRANTIES EXCEPT AS
LISTED.
• PURCHASER ASSUMES ALL RISKS IN THE
ASSEMBLY AND OPERATION OF THIS UNIT.
• FAILURE TO FOLLOW WARNINGS AND
OPERATIONAL INSTRUCTIONS CONTAINED IN
THIS MANUAL CAN RESULT IN SEVERE PROPERTY
DAMAGE AND/OR PERSONAL INJURY.
• IN NO EVENT WILL BALKENE HOME/WELL
TRAVELED LIVING, OR ITS DIRECTORS, OFFICERS
OR AGENTS BE LIABLE TO THE PURCHASER OR
ANY THIRD PARTY, WHETHER IN CONTRACT, IN
TORT, OR ON ANY OTHER BASIS, FOR ANY
INDIRECT, SPECIAL, PUNITIVE, EXEMPLARY,
CONSEQUENTIAL, OR INCIDENTAL LOSS, COST,
OR DAMAGE ARISING OUT OF OR IN
CONNECTION WITH THE SALE, MAINTENANCE,
USE, OR INABILITY TO USE THE PRODUCT, EVEN
IF BALKENE HOME/WELL TRAVELED LIVING OR
ITS DIRECTORS, OFFICERS OR AGENTS HAVE BEEN
ADVISED OF THE POSSIBILITY OF SUCH LOSSES,
COSTS OR DAMAGES, OR IF SUCH LOSSES, COSTS,
OR DAMAGES ARE FORESEEABLE. IN NO EVENT
WILL BALKENE HOME/WELL TRAVELED LIVING,
OR ITS OFFICERS, DIRECTORS, OR AGENTS BE
LIABLE FOR ANY DIRECT LOSSES, COSTS OR
DAMAGES THAT EXCEED THE PURCHASE PRICE
OF THE PRODUCT.
• SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO
THE PURCHASER.
Important Notice
Do NOT return to place of purchase—for customer service and warranty issues:
Call toll-free
Email
Live chat
[phone] 9 a.m. – 9 p.m., EST
[email protected]
balkenehome.com 9 a.m. - 6 p.m., EST, Monday - Friday
Distributed by:
Well Traveled Living
716 S 8th Street, Amelia Island, FL 32034
balkenehome.com
[email protected]
[phone]
Fire Sense®, Patio Sense,® Avalon Home,® Mojave Sun®, Vulcan®, Balkene Home® and Well Traveled Living® are registered trademarks of
Well Traveled Imports, Inc®. All assembly instruction presentations are the property of Well Traveled Imports, Inc.
® and are protected by
U.S. copyrights and trademarks. All rights reserved.
EXTEND YOUR WARRANTY
When you purchase a Fire Sense or Balkene Home product from any authorized retailer, you'll have peace
of mind in knowing that it comes with a one-year warranty. Extend your warranty for an additional year
when you review your item at balkenehome.com within 365 days of purchase.