Balt 27652 User manual

Balt Odyssey 24 Laptop

Charging Cart - 27652

Instruction Manual

123456789012345678901234567890121234567890123456789012345678901212345678901234

Odyssey Laptop Charging Cart

Assembly Instructions

Part Drawing Description Qty Part Drawing Description Qty

Odyssey Laptop Charging Cart

Hardware List

AM6X15mm Socket Screw 32 EA

A1 M6X45 mm Socket Screw 8 EA

A2 M6X65 mm Socket Screw 4 EA

BGrommet Metal Base 4 EA

C4” Locking Plate Caster 2 EA

D4” Caster 2 EA

FAllen Wrench 1 EA

Metal Base 1 EA

Top Panel 1 EA

Shelf 7 EA

Side Handle 2 EA

Left Side Panel 1 EA

Right Side Panel 1 EA

G Tapped Rivet 8 EA

H Cam 14 EA

I Cam Posts 14 EA

J Wood Dowel 8 EA

K Electrical Mount 4 EA

L Electrical Mount Screw M5 4 EA

M Electrical Outletl-Large 2 EA

Upper Back Panel 1 EA

P7-1 Bottom Back Panel 1EA

Part Drawing Description Qty Part Drawing Description Qty

Odyssey Laptop Charging Cart

Hardware List

P10

P11

P12

P13 Right Door 1 EA

Left Door ! EA

Vertical Support 2 EA

Center Back Panel 1 EA

V Grommet 2 EA

R Shelf Pin 28 EA

S Door Hinge 4 EA

T Hinge Screw-Wood 16 EA

U Hinge Screw-Door 8 EA

P Back Lock 1 EA

Q Lock Clip 1 EA

W Key Sets 2 EA

X Magnet 1 EA

Y Phillips Magnet Screws 2 EA

IdentifyandSeparatealltheParts

andHardware.

1.)

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

Illustration # 1

AP-1

2.) Attachtwo Locking Casters (C)to the bottom

frontandtwoNon-Locking Casters (D) to the

bottomrear of Metal Base (P-1)using four

Screws(A)foreach caster. See Illustration #1.

Illustration # 2

Attachone of theSide Handles (P-4) to the left side of

MetalBase (P-1) using twoScrews (A2) as shownin

Illustration#2.

P-1

P-4

3.)

Front

2a.) Place a Grommet- Base (B) in each of the

twolargeholes in the MetalBase (P1).

4.) Attachthe LeftSide Panel (P5) to the Side Handle (P4)using four Screws(A1) and four

TappedRivets(G)asshowninIllustration#3.

P-5

GP-4

Illustration # 3

5.) Secure the Left Side Panel (P5) to the Metal Base (P1) using two Screws (A) as shown in

Illustration#4.

Illustration # 4

Bottom View

Illustration # 6

6.) Screw in two Cam Posts (I) into the embedded plastic inserts in the Left Side Panel (P5) as shown in

Illustration#5. InstalltwoCams(H)intothelarge holes in the Bottom Back Panel (P7-1). Install a

Wood Dowel (J) in the center hole on the edge of the Bottom Back Panel (P7-1). With the Cam’s (H)

arrowspointed at the CamPosts (I), slide theBottomBack Panel (P7-1)intoplace and turn theCams

clockwiseaquarterturn to the lock position.

P7-1

7.) Center the Back Frame (P8) over the two embedded threaded metal inserts in the Left Side Panel

(P5)andsecurewithtwoScrews (A) as shown in Illustration # 6.

AP8

Illustration # 5

Illustration # 7

8.)

9.)

Screw in two Cam Posts (I) into the embedded plastic inserts in the Left Side Panel (P5) as shown

inIllustration#5. InstalltwoCams(H) into the large holes in the Upper BackPanel (P7). Installa

WoodDowel (J) in the centerhole on the edge ofthe Upper Back Panel (P7). Withthe Cam’s (H)

arrowspointed at the CamPosts (I), slide theUpper Back Panel (P7)into place and turnthe Cams

clockwisea quarter turn to thelockposition.

IP7

Illustration # 8

Place two Cams (H) in the Upper Back Panel (P7) and two Cams (H) in the Bottom Back Panel

(P7-1)makingsurethe arrows on the Cams (H)arepointeto the right as shown inIllustration#8.

Push in one Wood Dowel (J) into the edge of the Upper Back Panel (P7) and one Wood Dowel (J)

intothe edge ofthe Bottom Back Panel (P7-1). Screw in four Cam Posts (I) intothe the RightSide

Panel(P6). MovetheRight Side Panel (P6) intoconnect. TurntheCams (H) a quarter turnto

lock. Secure the Back Frame (P8) to the Right Side Panel (P6) using two Screws (A).

P7-1

P7 H

Illustration # 9

10.) Attachthe Right Side Panel (P6) to the Side Handle(P4) using fourScrews (A1) andfour

TappedRivets(G)asshowninIllustration#9.

Illustration # 10

11.)

Secure the Right Side Panel (P6) to the Metal Base (P1) using two Screws (A) as shown in

Illustration#10.

Bottom View

Illustration # 11

12.) Inserttwo Cams (H) intothetop of the LeftSide Panel (P5) andoneinto the top leftof the Back

Panel (P7) making sure the arrow on the Cams (H) are pointed up. Press in two Wood Dowels

(J)into the top edge of the Left Side Panel(P5). Screw in three Cam Posts (I) intothe bottom

leftof theTop Panel (P2) asshowninIllustration # 11. Repeatthesesame Stepsto install

Cams(H),Wood Dowels (J) and Cam Posts (I) intothe Right Side Panel (P6), the Back Panel

(P7)andunderthe right bottom of theTop Panel (P2). Lower theTop Panel (P2) down ontothe

assemblyandturntheCamsaquarterturn to lock into place.

13.) Place the Back Lock (P) into the Center Back Panel (P10) from the outside and in. Use the Lock

Clip (Q) on the back side of the Back Lock (P) to secure it in place. Place the bottom pegs on the

CenterBack Panel (P10)into the two holesin the bottomof the BackFrame (P8) and lock the

Back Lock (P) to keep the Center Back Panel (P10) in place. See Illustration # 12.

Illustration # 12

Illustration # 12a

P10

InsideView

Other Balt Batteries Charger manuals

Balt

Balt 27689 User manual

Balt

Balt 27541 User manual

Popular Batteries Charger manuals by other brands

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger user manual

Enelion

Enelion Vertica manual

RCA

RCA CHU6 instruction manual

ANSMANN

ANSMANN ALCT 6/24-10 manual

Hitachi

Hitachi UC 18YRSL Safety instructions and instruction manual

Olympus

Olympus B-20 LPC instructions

Exibel

Exibel ZH1708143 operating instructions

Lenmar

Lenmar Mach 1 user manual

CTEK

CTEK MXS 5.0 manual

ABB

ABB HT842379 Operation manual

Nitecore

Nitecore Superb Charger SC4 user manual

Renogy

Renogy RBC2125DS-21W quick guide

Braun

Braun BWC02M User instructions

CTEK

CTEK MXS 3.6 manual

Black & Decker

Black & Decker BDV090 Original instructions

Trinity

Trinity DPD quick start guide

Hulkman

Hulkman Sigma 1 user guide

IKEA

IKEA koppla manual