Balt 46572 hi-hilo-3 User manual

123456789012345678901234567890121234567890123456789012345678901212345678901

#46572 HI-HILO-3

Adjustable Pneumatic Workstation

AssemblyInstructions

A Flat Head Screw 10 EA

A1 1-1/4” Flat Head Screw 4 EA

B 2-3/8” Flat Head Screw 8 EA

C InteriorThreadedPost 4 EA

D 2” Locking Caster (for Front) 2 EA

E 2” Caster (for Back) 2 EA

F Allen Wrench 1 EA

G Adjustment Knob 1 EA

H Caster Wrench 1 EA

N Flat Washer 4 EA

P Black Plastic Spacer 2 EA

Q Hex Nut 4 EA

Part Drawing Description Qty Part Drawing Description Qty

WOW Adjustable Pneumatic Workstation

#46572 Hi-HILo-3

P-1 Top Platform 1 EA

P-2 Top Support 1 EA

P-3 Security Rail 1 EA

P-4 Keyboard Platform 1 EA

P-5 Keyboard Slide 1 EA

P-6 Bottom Shelf 1 EA

P-7 Base Frame 1 EA

P-8 Cylinder Assembly 1 EA

P-9 CPU Sleeve 1 EA

P-10 CPU Rod 2 EA

P-11 Keyboard Slide Plate 1 EA

Hardware List

(factoryinstalled)

To Assemble:

Identify and Separate all the Parts and Hardware.

1. Separate Pneumatic Cylinder Assembly into 2 pieces(P-2) and (P-8)

a.) Loosen Knob by turning counter clockwise 2-3 turns.

b.) Place Pneumatic Cylinder Assembly on the floor and lift Handle to actuate cylinder.

c.) When Cylinder is fully extended, lift Top Support (P-2) off Cylinder Assembly (P-8)

Loosen Knob by

turning counter

clockwise 2-3

turns

#46572HI-HILO-3

AssemblyDiagram

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

Pneumatic Cylinder Assembly

Pneumatic Cylinder

Assembly

P-8

P-2

#46572HI-HILO-3

2. Place the Bottom Shelf (P-6)

with the insert nuts facing up

and attach Base frame (P-7)

using 4 (2-3/8”) Flat Head

screws (B).

(Do not tighten screws all the way)

3. Attach Cylinder Receiver (P-8)

to the Base frame (P-7) and the

Bottom Shelf (P-6) using

4 (2-3/8”) Flat Head screws

(B) and 4 Interior Threaded

Posts (C) as shown in

illustration # 1.

Illustration # 1 - Base Assembly

P-9

P-10

Q N P

P-7

4. Attach Casters to the Base Frame

(P-7). 2 Locking casters (D) in the

front and 2 Casters (E) in the back.

Tighten Casters using Caster

Wrench (H).

5. Attach (2) each CPU Rods (P-10)

to the Right side or Left side of the

Base frame (P-7) as shown in

illustration #2.

6. Secure each CPU Rod (P-10) with (2)

each Hex nuts (Q), (2) each Flat

Washers (N), and (1) each Black

Plastic Spacer (P).

7. Slide CPU Sleeve (P-9) over ends of

CPU Rods (P-10) as shown in

illustration # 2.

Illustration # 2

P-8

P-6

CP-7

Do not use unless all screws are tight. At

least every six months, check all screws

to be sure they are tight. If parts are missing,

broken, damaged, or worn, stop use

of the product until repairs are made by your

dealer using factory authorized parts.

8. Place the Top Platform (P-1) with the

insert nuts facing up and attach Top

Support (P-2) using 4 Flat Head screws (A)

and 4 Flat Washers (N) as shown in illustration # 3.

9. Attach Security Rail (P-3) to Top Platform (P-1) using

4 Flat Head screws (A).

P-4 P-2

P-3

P-1

P-5

Illustration # 3

Missing Parts or UPS Damaged Parts

ForYourConvenienceyoucan

EMAILusat

[email protected]

24HOURS 7 DAYS A WEEK

Place the Keyboard Platform (P-4)

with the insert nuts facing up and

attach Keyboard Slide (P-5) using 4

(1-3/8”) Flat Head screws (A1) as

shown in Illustration # 3.

Insert the Keyboard Slide (P-5)

through the Top Support (P-2) and

secure it by attaching Keyboard Slide

Plate (P-11) with 2 Flat Head screw

(A). [Illustration # 4].

P-5

P-2

Illustration # 4

10.

11.

P-11

Top

Assembly

Base

Assembly

01/20/05

Slide the Top Support (P-2) over the

Cylinder Assembly (P-8) as shown

in illustration #5. Be sure that rod

locks into Top Support (P-2) for

correct height adjustment.[See

Detail-A.]

Illustration # 5

12.

Should you require assistance

during assembly, please call our

Customer Service Department

Monday - Friday 8 a.m. - 5 p.m.

Central Standard Time

Toll-Free Customer Service

1-800-749-2258

DETAIL A

P-8

P-2

To raise height of unit, loosen adjustment knob (G) and press handle on height adjustment

bracket upward toward top. The pneumatic cylinder will begin lifting the unit, and you can

release handle at the desired height. Secure unit at desired height by tightening adjustment

knob (G).

To lower height of unit, loosen adjustment knob (G) and press handle on height adjustment

bracket upward toward top. Press on center of Top Platform using body weight. Top Platform

will lower and you can release handle at the desired height. Secure unit at desired height by

tightening adjustment knob (G).

Height Adjustment

4”

#46572HI-HILO-3

Adjustable Pneumatic Workstation Formore information

1-800-749-2258

ShippingInformation

4.0 Cubic Feet

56 lbs.

41”

25 ¾”

6½”

Height adjustable with infinite positions ranging

from 27¾” to 35½” for Keyboard shelf

and 31¾” to 39½” for Monitor Shelf.

Keyboard Shelf pulls out for individual user

Comfort.

Includes 2” Casters for mobility.

AvailableinMahogany Laminate

or Teak Laminate w/Black Frame.

ShipsUPS.

24"

11¾ X 31½"

01/20/05

22½”

31½”

8-10”

18¼”

Table of contents

Other Balt Desktop manuals

Balt

Balt Wind-Surfer 44162 User manual

Balt

Balt LAP-2C User manual

Balt

Balt WriteAngle-LT 82883 User manual

Balt

Balt HI-LO-3 45972 User manual

Balt

Balt WOW Flexi-Desk User manual

Balt

Balt 91113 User manual

Balt

Balt ALEKTO-3 User manual

Balt

Balt 89853 User manual

Popular Desktop manuals by other brands

HP m9350f - Pavilion - Elite Quick setup

Fellowes

Fellowes Lotus VE manual

NCR

NCR PC4I owner's manual

Dell

Dell 7710 quick start guide

Lenovo

Lenovo ThinkCentre M58e Användarhandbok

Alpha Microsystems

Alpha Microsystems AM-1600 Upgrade instructions

Everex

Everex Impact GA32 user manual

Acer

Acer Veriton D461 Service guide

Sony

Sony VGN-FZ21J user guide

Intel

Intel NUC8CY Integration guide

IBM

IBM 5251 Series Maintenance Information Manual

Shuttle

Shuttle XH110G Series user guide

Xerox

Xerox 820-II Operation manual

Lenovo

Lenovo ThinkCentre Edge 5068 Hardware Maintenance Manual

Acorn computer

Acorn computer A3000 Welcome guide

HP Vectra VE 5/xxx - 2 user guide

Dell

Dell OptiPlex 7780 All-In-One Setup and specifications

Protech Systems

Protech Systems SE-8210 Quick reference guide

Balt 46572 HI-HILO-3 User manual

Popular Desktop manuals by other brands