Balt Wow flexi-desk User manual

1234567890123456789012345678901212345678901234567890123

#90329

WOW Flexi-Desk

Assembly Instructions

A2” Locking Caster 2 EA

B2” Caster 2 EA

CCaster Wrench 1 EA

D4 EA

E M6x40mm 4 EA

F Allen Wrench 1 EA

Part Drawing Description Qty Part Drawing Description Qty

#90329 WOW Flexi-Stand

P1 Pole 1 EA

P2 Base 1 EA

P3 Top Frame 1 EA

P4 Top Panel 1 EA

P5 Monitor Mount 1 EA

Hardware List

M6x25mm

Should you require assistance during assembly,

please call our Customer Service Department

Monday - Friday 8 a.m. - 5 p.m.

Central Standard Time 1-800-749-2258

Missing Parts or UPS Damaged Parts

ForYourConvenienceyou can

EMAILus at

[email protected]

24HOURS 7 DAYSAWEEK

G Wrench 2 EA

H Cable Tie 3 EA

#90329

AssemblyDiagram

IdentifyandSeparateallthe Parts and Hardware.

Illustration # 1

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

1.)

2.) Screwin two LockingCasters (A) intothe bottom ofthe

Base(P2) at thefront. Screw intwo Casters (B)into the

bottomof Base (P-1) at therear. The rear ofthe

Base(P-2) has twoholeson the topasshown in

Illustration#1. TightenwithCaster Wrench(C).

3.)

Illustration # 2

Insertthe Pole (P1) intotheBase (P2). Make sureyouplace the

endof the Polethathas the threadedinsertinto the Baseas

showninillustration #2. Attachthe Pole (P-1)tothe Base (P-2)

usingfourScrews(D). TightenScrewswithAllenWrench(F).

Do not use unless all screws are tight. At least every six months, check all screws to be sure

they are tight. If parts are missing, broken, damaged, or worn, stop use of the product

until repairs are made by your dealer using factory authorized parts.

Rear Leg

hasHoles

FrontLeg

HolestoFront

7.)Snap-onthree CableTies (H) ontothe

Pole (P1) to help with wire management

asshown inillustration #5.

90329_08-24-12

Illustration # 3

4.)AttachtheTop Panel (P-4)totheTop Frame (P-3)usingfour

Screws(E)as shown in illustration#3.

5.) Openup theClamp Leveron the TopPanelAssembly. Placeit on the Pole (P-1) andslide it

downto the heightlevel you like. LocktheClamp Lever downto hold theTop Panelassembly

in place on the Pole. See illustration #4.

6.) Openthe Clamp Lever on

the Monitor Mount (P-5) and

slide it down the Pole (P-1)

to the height you like. Lock

the Clamp Lever down to hold

theMonitor Mountin place.

Note: Pop the plastic caps off the

MonitorMount(P-5)andusetwo

Wrench(G)toadjusttilttension if

needed.

Illustration # 5

Illustration # 4

Clamp Lever

TopPanel

Assembly

Clamp Lever

This manual suits for next models

Other Balt Desktop manuals

Balt

Balt 89853 User manual

Balt

Balt WriteAngle-LT 82883 User manual

Balt

Balt Wind-Surfer 44162 User manual

Balt

Balt 46572 HI-HILO-3 User manual

Balt

Balt ALEKTO-3 User manual

Balt

Balt HI-LO-3 45972 User manual

Balt

Balt 91113 User manual

Balt

Balt LAP-2C User manual

Popular Desktop manuals by other brands

Sensia

Sensia QRATE Scanner 3300 Installation, operation & maintenance manual

Intergraph

Intergraph TDZ 2000/ExtremeZ manual 

DVS

DVS Clipster Hardware guide

HP 742n - Pavilion - 512 MB RAM Specifications

HP Compaq dc5800 Disassembly instructions

HP DesignJet T610 troubleshooting guide

Fujitsu

Fujitsu ESPRIMO C710 Specifications

Lenovo

Lenovo ThinkCentre M90 Guide d'utilisation

IEI Technology

IEI Technology RPC-6010G user manual

Ollee

Ollee MINI Series user guide

Eaton

Eaton G110 Series installation guide

Sony

Sony PCV-R558DS - Vaio Digital Studio Desktop... Specifications

Sony

Sony VGC-LS35E - Vaio All-in-one Desktop Computer Specifications

Mopec

Mopec BF400 user manual

AMSTRAD

AMSTRAD PCW8256 user guide

HP XM600 - Kayak - 128 MB RAM Handbook

Siemens

Siemens SIMATIC PC BI10 Technical description

Moxa Technologies

Moxa Technologies DA-681 Series user manual

Balt WOW Flexi-Desk User manual

Popular Desktop manuals by other brands