Balt 89853 User manual

1234567890123456789012345678901212345678901234567890123456789012123456789012

#89853 Command Center

Portable AV Center

Assembly Instructions

P-1 Left Side Panel 1 EA

P-2 Right Side Panel 1 EA

P-3 Back Panel w/door 1 EA

P-4 Top Panel 1 EA

P-5 Top Door 1 EA

P-6 Front Door 1 EA

P-7 Removable shelf 3 EA

P-8 Keyboard Shelf 1 EA

P-9 Bottom Panel 1 EA

Part Drawing Description Qty Part Drawing Description Qty

Hardware List

(Pan Head For Rack Rails)

Command Center Portable AV Center

#89853

A Socket Screw M6X9mm 16 EA

A1 Socket Screw M6X60mm 4 EA

A2 Wood Screw #4x1/2 12 EA

A3 Wood Screw #6x5/8” 14 EA

A4 Wood Screw #4x1/2 4 EA

A5 Screw (Door Knobs) 2 EA

A6 Wood Screw #8x3/4” 8 EA

A7 Wood Screw -Strike Plate 1 EA

A8 Phillips Screw M4 X12 18 EA

B Keyboard Slide 2 EA

C Shelf Support Pins 12 EA

D Cam Lock 10 EA

E Cam Post 10 EA

F Wood Dowel 12 EA

G Door Hinge 2 EA

H 4” Locking Caster 2 EA

J 4” Caster 2 EA

(locks)

(magnet & Catch)

K Door Lock 3 EA

K1 Lock Ring 3 EA

K2 Lock Catch 1 EA

L Key 6 EA

M Door Magnet 1 EA

M1 Metal Strike Plate 1 EA

N Metal Door Knob 1 EA

N1 Wood Door Knob 1 EA

P Plastic Spring Button 4 EA

R Allen Wrench 1 EA

S Phillips Screwdriver 1 EA

FRONT OF BRACKET

P-10 Rack Rail 2 EA

P-11 Metal Base 1 EA

P-12 Handle 1 EA

P-13 Folding Shelf Bracket 2 EA

P-14 Side Shelf 1 EA

Part Drawing Description Qty Part Drawing Description Qty

Hardware List

Command Center Portable AV Center

#89853

Insert Screw

in this hole.

Insert Screw

in this hole.

Keyboard Slide Detail

2 Installed in door in Back Panel (P-3)

Missing Parts or UPS Damaged Parts

For Your Convenience you can

EMAIL us at

[email protected]

24HOURS 7 DAYS A WEEK

To Assemble:

Identify and Separate all the Parts and Hardware.

Place the Left Side Panel (P1) with the Predrilled holes facing up. Attach 1 Keyboard Slide (B)

to Left Side Panel (P1) and secure using 2 Wood Screws (A3) as shown

in illustration #1.

(See Slide Detail on Page 3)

Install 3 each Cam Posts (E) in the 3 threaded insert nuts (Pre-installed)

as shown in illustration #1.

Install 4 each Wood Dowels (F)

in the 4 Holes as shown in illustration #1.

Install 2 Cam Locks (D) into the 2 large

holes as shown in illustration #1

Illustration # 1

P-1

#89853 Command Center Assembly Diagram

Attach 1 each Door Magnet (M) to the Left Side Panel (P1) and

secure using 2 Wood Screws (A4) as shown in illustration #1.

Be sure that arrow on

top of Camlock (N)

aligns with centerline

of Edge Drilled hole.

Phillips

Screwdriver

Centerline

of Edge

Drilled hole.

Arrow

Place the Right Side Panel (P2) with the Predrilled holes facing up. Attach 1 Keyboard Slide

(B) to right Side Panel (P2) and secure using 2 Wood Screws (A3) as shown

in illustration #2. (See Slide Detail on Page 3)

Install 3 each Cam Posts (E) in the threaded insert nuts (Pre-installed)

as shown in illustration #2.

Install 4 each Wood Dowels (F) in the

4 Holes as shown in illustration #2.

Install 2 Cam Locks (D) into the

2 large holes as shown

in illustration #2.

Separate parts of Door Hinge(G) by loosening Screw (G3)

as shown in Door Hinge Detail. Attach 2 each (G1) to the

right Side Panel (P1) using 4 screws (A3)

as shown in illustration #2.

Place the Front Door (P6) with the 4 Screw Holes facing

up and insert 1 Lock (K) into the large hole as shown in

illustration #3. Press Lock Ring (K1) over protruding end of

Door Lock (K) as shown in illustration #3. Secure using 4

Wood Screws (A2) as shown in illustration #3.

Attach 2 each (G2) to the Front Door (P6) using

4 screws (A3) as shown in illustration #3.

Do not Tighten all the way.

Door Hinge(G) Detail

Illustration # 3

Illustration # 2

Attach Metal Door

Knob (N) to Front

Door (P6) using 1

screw (A5).

11.

12.

13.

14.

M1 A7

Attach 1 Metal

Strike Plate (M1) to

Front Door (P6)

using 1 screw (A7).

15.

10.

Place the Back Panel (P3) with the Holes facing

up and install 4 each Cam Locks (D) into the

large holes (Pre-installed) as shown

in illustration #4.

Illustration # 4

Place the Top Panel (P4) with

the Pre-drilled Holes facing up

and install 2 Cam Locks (D) into

the 2 large holes as shown

in illustration #5.

Place the Bottom Panel (P9) with

the Pre-drilled Holes facing up.

Install 4 each Cam Posts (E) in

the 4 threaded insert nuts

(Pre-installed) as shown

in illustration #6.

Install 4 each Wood Dowels (F)

in the 4 Holes as shown in

illustration #6.

Illustration # 6

Illustration # 5

P-9

A2 A5

Attach Wood Door Knob

(N1) to Door in Back

Panel (P3) using

1 each (A5) screw.

Insert 1 Lock (K) into the large

hole as shown in illustration

# 4. Press Lock Ring (K1) over

protruding end of Door Lock(K)

as shown in illustration # 4.

Secure using 4 Wood

Screws (A2).

Attach Lock Catch (K2) to Back

Panel (P3) using 2 each Wood

Screws (A4) as shown in

illustration #4.

16.

17.

18.

19.

20.

21.

To Secure Cam Locks,

Insert Large Phillips

Head Screwdriver and

turn Cam Lock 1/4 turn

(90 degrees) clockwise.

Illustration # 7

P-3

Attach Back Panel (P3), and Top Panel

(P4) to the Left Side Panel (P1) as shown

in illustration #8. Secure by turning the

Cam Locks (D) 1/4 Turn until they lock.

Place the Top Door (P5) with the 4 small holes facing up and insert 1 Lock (K) into the

large hole as shown in illustration #7. Press Lock Ring (K1) over protruding end of Door

Lock(K) as shown in illustration #7.

Secure using 4 Wood Screws (A2).

Insert 2 Plastic Spring Buttons (P) in the ends of

Top Door (P5) as shown in illustration #7.

P5 K

Illustration # 8

22.

24.

23.

Illustration # 9

25.

Attach Right Side Panel(P2)

to the Back Panel (P3), and

Top Panel (P4) as shown in

illustration #9. Secure by

turning the Cam Locks (D)

1/4 Turn until they lock.

P-1

Attach 2 Locking Casters (H) to the front,

and 2 Casters (J) to the back of the Metal

Base (P11) using 16 screws (A). Tighten all

Casters using Allen Wrench (R).

Attach Bottom Panel (P9) to the Metal Base (P-12) using 4 each screws (A1) as shown in

illustration #10. Tighten these 4 Screws using Allen Wrench (R).

Illustration # 10

P11

26.

27.

Should you require assistance during assembly,

please call our Customer Service Department

Monday - Friday 8 a.m. - 5 p.m.

Central Standard Time

Toll-Free Customer Service

1-800-749-2258

To assemble keyboard, press Plastic

Clips as shown by arrows in illustration

#12 to release inner keyboard slide.

29.

30.

Illustration # 11

28. Slide Left Side Panel (P1) and Right Side

Panel (P2) over Cam Posts(E) in Bottom

Panel (P9) as shown in illustration #11.

To secure Cam Locks, Insert Large

Phillips Head Screwdriver and turn Cam

Lock 1/4 turn (90 degrees) clockwise.

P1 D

Turn Keyboard Shelf (P8) over and

attach 2 Inner Keyboard Slides (B)

using 4 each screws (A3) as shown

in illustration #12.

Illustration # 12

Plastic Clip

To Secure Cam Locks,

Insert Large Phillips

Head Screwdriver and

turn Cam Lock 1/4 turn

(90 degrees) clockwise.

Illustration # 14

Illustration # 13

35. Place 12 Shelf Support Pins

Panels (P1 & P2 ) at desired

shelf height. Place Remov-

able Shelves (P7) on Shelf

Support Pins (C).

Attach 2 each Rack Rails (P10)

to the Left Side Panel (P1) and

the Right Side Panel (P2) using

8 each screws (A6) as shown

in illustration # 14. (Finger

tighten only.)

P10

34.

Slide Keyboard Shelf

Assembly back into the

Keyboard Slides as shown

in illustration # 13.

P1 33.

Locate 2 each Spring

Buttons (P) in the ends of

theTop Door (P5).

Insert the end of Spring

Buttons (P) into the holes

in Left Side Panel (P1) and

the Right Side Panel (P2)

as shown in

illustration # 13.

31.

32.

Other Balt Desktop manuals

Balt

Balt WriteAngle-LT 82883 User manual

Balt

Balt LAP-2C User manual

Balt

Balt Wind-Surfer 44162 User manual

Balt

Balt WOW Flexi-Desk User manual

Balt

Balt 46572 HI-HILO-3 User manual

Balt

Balt 91113 User manual

Balt

Balt HI-LO-3 45972 User manual

Balt

Balt ALEKTO-3 User manual

Popular Desktop manuals by other brands

StarTech.com

StarTech.com ARMSTSL manual

Dell

Dell Inspiron 5720 quick start guide

GÜDE

GÜDE WERKBANK GW 6/2 XL Translation of the original instructions

Lenovo

Lenovo ThinkCentre M62z Vodič za uporabnika

Lenovo

Lenovo ThinkCentre M71z user guide

Fujitsu

Fujitsu ESPRIMO C7xx operating manual

Bosch

Bosch DCU 130 operating instructions

Zotac

Zotac VR GO quick start guide

HP 260 G2 DM Product End-of-Life Disassembly Instructions

Sony

Sony VAIO VGC-LS21 Specifications

HP ProOne 400 G1 specification

IBM

IBM PS/2 60 Hardware maintenance service

Acer

Acer Aspire SA60 Service guide

Lenovo

Lenovo ThinkCentre M71z Uživatelská příručka

IBM

IBM Aptiva 2198 reference guide

Sony

Sony PCV-LX810 - Vaio Slimtop Computer System reference manual

Dell

Dell Precision U3525 Quick reference guide

MicroTouch

MicroTouch IC-215P-AW2 user guide