Balt Lumina flipper-60 User manual

123456789012345678901234567890121234567890123456789012345678901212345678901234

Lumina Flipper-60

60”Conference Table

Assembly Instructions

P1 TopPlatform 1 EA

P2 Left Leg 1 EA

P3 RightLeg 1 EA

P4 CrossBrace 1EA

P5 Top Support Brace 1 EA

Part Drawing Description Qty Part Drawing Description Qty

WOW Lumina Flipper-60

We recommend that you assemble this

unit on a table.

Do not use unless all screws are tight. At least every six months, check all screws to be sure

they are tight. If parts are missing, broken, damaged, or worn, stop use of the product

until repairs are made by your dealer using factory authorized parts.

Should you require assistance during assembly,

please call our Customer Service Department

Monday - Friday 8 a.m. - 5 p.m.

Central Standard Time 1-800-749-2258

Missing Parts or UPS Damaged Parts

ForYourConvenienceyoucan

EMAILus at

[email protected]

24HOURS 7 DAYS AWEEK

Hardware List

Caster Wrench 1 EA

Allen Wrench 1 EA

3” Locking Caster 2 EA

Screw M6X15mm 8 EA

Screw M6X38mm 2 EA

3” Non-Locking Caster 2 EA

G Screw M6X25mm 4 EA

H Caster Lock Washer 4 EA

Illustration # 1

1.)

2.)

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

Identify and Separateallthe PartsandHardware.

Lumina Flipper- 60

Assembly Instructions

AttachtheCross Brace (P-4) to the RightLeg(P-3) using two Screws (G) asshownin

Illustration# 1. Attachthe Left Leg(P-2)to the other end ofCrossBrace(P-4) using

twoScrews(G). AttachtheTopSupportBrace(P-5) between the RightLeg(P-3)and

theLeft Leg (P-2) using fourScrews(A).

Illustration # 2

3.)AttachtheRightand Left Leg/Brace assembly to theTop Platform(P-1)

usingtwo Screws (B) throughtheTopSupport Brace(P-5) andfourScrews (A)

throughthe topleg plates.

4.) Place one Caster Lock Washer (H) on each Caster’s threaded stem before attaching. .

Screw intwoLocking Casters (C) in the frontthreadedholesand two Non-Locking Casters (D) in

therear holes oftheRight and LeftLegs asshownin Illustration # 3. Tighten the Castersusing

CasterWrench (F). Set your table ontheCasters and tighten all Screws(A,B& G) using

AllenWrench(E).

Illustration # 3

Lumina60Flipper_06-07-10

Lumina Flipper

123456789012345678901234567890121234567890123456789012345678901212345678901234

Lumina Flipper-72

72”Conference Table

Assembly Instructions

P1 TopPlatform 1 EA

P2 Left Leg 1 EA

P3 RightLeg 1 EA

P4 CrossBrace 1EA

P5 Top Support Brace 1 EA

Part Drawing Description Qty Part Drawing Description Qty

WOW Lumina Flipper-72

We recommend that you assemble this

unit on a table.

Do not use unless all screws are tight. At least every six months, check all screws to be sure

they are tight. If parts are missing, broken, damaged, or worn, stop use of the product

until repairs are made by your dealer using factory authorized parts.

Should you require assistance during assembly,

please call our Customer Service Department

Monday - Friday 8 a.m. - 5 p.m.

Central Standard Time 1-800-749-2258

Missing Parts or UPS Damaged Parts

ForYourConvenienceyoucan

EMAILus at

[email protected]

24HOURS 7 DAYS AWEEK

Hardware List

Caster Wrench 1 EA

Allen Wrench 1 EA

3” Locking Caster 2 EA

Screw M6X15mm 8 EA

Screw M6X38mm 2 EA

3” Non-Locking Caster 2 EA

G Screw M6X25mm 4 EA

H Lock Washer 4 EA

1.)

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

Identify and Separateallthe PartsandHardware.

Lumina Flipper- 72

Assembly Instructions

Illustration # 1

2.) AttachtheCross Brace (P-4) to the RightLeg(P-3) using two Screws (G) asshownin

Illustration# 1. Attachthe LeftLeg(P-2) to the other endofCross Brace (P-4) using

twoScrews(G). AttachtheTopSupport Brace (P-5) between theRightLeg(P-3) and

theLeft Leg (P-2) using fourScrews(A).

Illustration # 2

3.)AttachtheRightand LeftLeg/ Brace assembly to theTop Platform(P-1)

usingtwo Screws (B) throughtheTopSupport Brace(P-5) andfourScrews (A)

throughthe topleg plates.

LuminaFlipper72_06-08-10

Lumina Flipper

Illustration # 3

4.) Place one Caster Lock Washer (H) on each Caster’s threaded stem before attaching. .

Screw intwoLocking Casters (C) in the frontthreadedholesand two Non-Locking Casters (D) in

therear holes oftheRight and LeftLegs asshownin Illustration # 3. Tighten the Castersusing

CasterWrench (F). Set your table ontheCasters and tighten all Screws(A,B& G) using

AllenWrench(E).

123456789012345678901234567890121234567890123456789012345678901212345678901234

Lumina Flipper-48HR

48” Half-round Conference Table

Assembly Instructions

P1 TopPlatform 1 EA

P2 Left Leg 1 EA

P3 RightLeg 1 EA

P4 Cross Brace 1 EA

P5 Top Support Brace 1 EA

Part Drawing Description Qty Part Drawing Description Qty

Lumina Flipper-48HR

We recommend that you assemble this

unit on a table.

Do not use unless all screws are tight. At least every six months, check all screws to be sure

they are tight. If parts are missing, broken, damaged, or worn, stop use of the product

until repairs are made by your dealer using factory authorized parts.

Should you require assistance during assembly,

please call our Customer Service Department

Monday - Friday 8 a.m. - 5 p.m.

Central Standard Time 1-800-749-2258

Missing Parts or UPS Damaged Parts

ForYourConvenienceyoucan

EMAILus at

[email protected]

24HOURS 7 DAYS AWEEK

Hardware List

Caster Wrench 1 EA

Allen Wrench 1 EA

3” Locking Caster 2 EA

Screw M6X15mm 8 EA

Screw M6X38mm 1 EA

3” Non-Locking Caster 2 EA

G Screw M6X25mm 4 EA

H Caster Lock Washer 4 EA

Illustration # 2

1.)

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

Identifyand Separateallthe Parts andHardware.

Lumina Flipper- Half Round

Assembly Instructions

2.) AttachtheCross Brace (P-4) to the RightLeg(P-3) using two Screws (G) asshownin

Illustration# 1. Attachthe LeftLeg(P-2) to the other endofCross Brace (P-4) using

twoScrews(G). AttachtheTopSupport Brace (P-5) between theRightLeg(P-3) and

theLeft Leg (P-2) using fourScrews(A).

3.)AttachtheRightand LeftLeg/ Brace assembly to theTop Platform(P-1)

usingone Screw (B)throughtheTop Support Brace(P-5)andfour

Screws(A) through thetopleg plates. (SeeIllustration# 2).

AP5

P3 P2

Illustration #1

Lumina Flipper- 48 HR

Illustration #3

LuminaFlipper48HR_06-04-10

4.) Place one Caster Lock Washer (H) on each Caster’s threaded stem before attaching. .

Screw intwoLocking Casters (C) in the frontthreadedholesand two Non-Locking Casters (D) in

therear holes oftheRight and LeftLegs asshownin Illustration # 3. Tighten the Castersusing

CasterWrench (F). Set your table ontheCasters and tighten all Screws(A,B& G) using

AllenWrench(E).

123456789012345678901234567890121234567890123456789012345678901212345678901234

Lumina Modesty Panel

Assembly Instructions

P1 ModestyPanel 1 EA

Part Drawing Description Qty Part Drawing Description Qty

Lumina Modesty Panel

Do not use unless all screws are tight. At least every six months, check all screws to be sure

they are tight. If parts are missing, broken, damaged, or worn, stop use of the product

until repairs are made by your dealer using factory authorized parts.

Should you require assistance during assembly,

please call our Customer Service Department

Monday - Friday 8 a.m. - 5 p.m.

Central Standard Time 1-800-749-2258

Missing Parts or UPS Damaged Parts

ForYourConvenienceyoucan

EMAILusat

[email protected]

24HOURS 7 DAYSAWEEK

Hardware List

Allen Wrench 1 EA

Screw M6X10mm 3 EA

1.)

EAD

HROUGH

NSTRUCTIONS

FROM

BEGINNING

END

BEFORE

STARTING

ASSEMBLE

UNIT

Identifyand Separateallthe Parts andHardware.

Lumina Modesty Panel

Assembly Instructions

2.) Placethe Modesty Panel (P-1) overthetable’s cross bar as showninIllustration #1. Center

theModestyPanel between the legs and secure inplaceusing three Screws (A). Tighten

the Screws using Allen Wrench (B).

Illustration #1

66612,66613_6-2-11

Illustration # 2

This manual suits for next models

Other Balt Indoor Furnishing manuals

Popular Indoor Furnishing manuals by other brands

Niche

Niche NL2SBK Assembly instructions

Hettich

Hettich FA-SLS-FG0153 Series Assembly manual

BUT

BUT OHIO manual

DIR

DIR Dionysus 5201-L instruction manual

Lopas

Lopas Dafne Assembly instructions

Vermeiren

Vermeiren Bretagne user manual

Naterial

Naterial AYAMO 3276007277999 Assembly manual

WB Mfg

WB Mfg UNE-T Assembly instructions

Häfele

Häfele 271.92.260 installation instructions

Birlea

Birlea EDGTVUBLK Assembly instructions

DROMEAS

DROMEAS Vip operating instructions

Better Homes and Gardens

Better Homes and Gardens FLYNN BH16-021-199-13 Assembly instructions

Argos

Argos Tammy 918-2723 Care and User instructions

Bakker Elkhuizen

Bakker Elkhuizen BNEASSDR2 Accessories Installation Guide

Atlantic

Atlantic 144 DVD Specification sheet

meubar

meubar JAIPUR DR6 Assembly instructions

Unfinished Furniture of Wilmington

Unfinished Furniture of Wilmington WC-3624 Assembly instructions

FourStarGroup

FourStarGroup 11223764V quick start guide

Balt Lumina Flipper-60 User manual

Popular Indoor Furnishing manuals by other brands