B&B Electronics Elinx ESW200 Series User manual

Quick Start Guide
Elinx ESW200 Series
5 and 8 port Unmanaged Ethernet Switch

ESW200 Series
Documentation Number: ESW200series-1112qsg
International Headquarters:
707 Dayton Road
Ottawa, IL 61350 USA
Phone [phone]
Website: www.bb-elec.com
Sales e-mail: [e-mail]
Technical Support: [e-mail] –
European Headquarters
B&B Electronics
Westlink Commercial Park
Oranmore, Co. Galway, Ireland
Phone [phone]
Website: www.bb-europe.com
Sales e-mail: [e-mail]
Technical Support: [e-mail]
Original –May 2011
©2011 No part of this publication may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photography, recording, or any information storage and retrieval
system without written consent. Information in this manual is subject to change without notice, and does
not represent a commitment on the part.
B&B Electronics Manufacturing shall not be liable for incidental or consequential damages resulting from
the furnishing, performance, or use of this manual. All brand names used in this manual are the
registered trademarks of their respective owners. The use of trademarks or other designations in this
publication is for reference purposes only and does not constitute an endorsement by the trademark
holder.

Quick Start Guide Documentation Number: ESW200series-1112qsg i
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Table of Contents
Chapter 1 –Introduction 1
DESCRIPTION ..............................................................................................................1
PACKAGE CHECKLIST.................................................................................................1
ESW205/208 FEATURES.............................................................................................2
ESW205/208 OVERVIEW............................................................................................3
Front Panel............................................................................................................3
Dimensional Drawing ESW205 Series...................................................................4
Dimensional Drawing ESW208-2xx Series............................................................5
Dimensional Drawing ESW208-4xx Series............................................................6
LED INDICATORS .......................................................................................................7
DIN RAIL MOUNTING..................................................................................................7
PANEL MOUNTING......................................................................................................8
RJ45 ETHERNET CONNECTIONS..................................................................................9
POWER INPUT CONNECTIONS....................................................................................11
UL INSTALLATION INFORMATION.............................................................................11
Electrical Ratings.................................................................................................11
Wiring Terminals:................................................................................................12
Ambient Temperature: .........................................................................................12
SPECIFICATIONS........................................................................................................13

ii Quick Start Guide Documentation Number: ESW200series-1112qsg
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com

Quick Start Guide Documentation Number: ESW200series-1112qsg 1
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Chapter 1 –Introduction
Description
The ESW205/208 series are plug-and-play, Class 1 Div 2, heavy Industrial
Ethernet switches with a compact IP30 DIN rail case. Switch
configurations support 5 and 8 ports, all copper or with ST, SC fiber ports.
They will support IEEE 802.3 for 10BaseT (10 Mbps), IEEE 802.3u for
100BaseTX and 100BaseFX (100 Mbps), and IEEE 802.3x, 10/100 Mbps,
full and half duplex, MDI/MDX auto sensing.
The ESW205/208 series uses dual power inputs that accept 12 to 36 VDC
or 10 to 24 VAC with removable terminal blocks. The acceptable
operating temperature range is -10C to 60C or (-T models) -40 to 75°C with
an ambient relative humidity rating of 10 to 95% (Non-condensing).
The ESW205/208 series has 7 different mounting options. One being din
rail and 6 different panel mounted options. Panel mount adapters are
shipped with switches.
Package Checklist
The ESW205/208 will ship with the following items.
B&B Ethernet switch with attached din rail clip
Quick Start Guide
4 - Panel mount clips with screws

2 Quick Start Guide Documentation Number: ESW200series-1112qsg
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
ESW205/208 features
10BaseT, 100BaseTX, 100BaseFX
10/100 Mbps, full and half duplex, MDI/MDX auto sensing.
Full / Half Duplex Back Pressure Flow Control
Store and forward architecture
Broadcast Storm control
RJ45 shielded connectors
Single mode, multi mode, ST, SC, 100BaseFX fiber connectors
Compact IP 30 enclosure
UL/cUL Class I Div 2 Groups A,B,C, and D
Heavy Industrial Level3, EN61000-6-2 certified
Shock, Vibration, and Free Fall
Din rail and panel mountable
-10C to 60C or (-T models) -40 to 75°C operating temperature

Quick Start Guide Documentation Number: ESW200series-1112qsg 3
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
ESW205/208 Overview
Front Panel
1. P1 power LED
2. P2 power LED
3. L1 fiber port Link, Activity LED
4. 100BaseFX, SC or ST Fiber Port
5. Speed LED
6. 10/100BaseT(X) RJ45 Port
7. Link LED
8. Power Terminal Block, P1 and P2

4 Quick Start Guide Documentation Number: ESW200series-1112qsg
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Dimensional Drawing ESW205 Series

Quick Start Guide Documentation Number: ESW200series-1112qsg 5
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Dimensional Drawing ESW208-2xx Series

6 Quick Start Guide Documentation Number: ESW200series-1112qsg
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Dimensional Drawing ESW208-4xx Series

Quick Start Guide Documentation Number: ESW200series-1112qsg 7
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
LED Indicators
LED
Status
Description
PWR
Green ON
Power Applied
Off
No power
Speed LED
Green ON
100Mbps
Off
10Mbps
Link / Activity LED
Green ON
Link
Blinking
Activity
Off
Not connected to network
Fiber LED
Green ON
Link
Blinking
Activity
Off
Not connected to network
Din Rail Mounting
The din rail mounting clips are connected to the switch when shipped and
ready to be mounted on a 35mm size din rail.

8 Quick Start Guide Documentation Number: ESW200series-1112qsg
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Panel Mounting
The switch ships with 4 panel mount clips giving the user 6 different ways
to panel mount the unit.

Quick Start Guide Documentation Number: ESW200series-1112qsg 9
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
RJ45 Ethernet Connections
The ESW200 series RJ45 connectors will support 10BaseT and 100BaseTX
communications. Each RJ45 port supports full or half duplex and
MDI/MDX auto sensing.
Below are the EIA/TIA T568A / B color standard and RJ45 pin out along
with standard and crossover cable connections.

10 Quick Start Guide Documentation Number: ESW200series-1112qsg
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
100BaseFX Ethernet SC / ST Fiber Port
The use of fiber optics has become prevalent in Industrial Ethernet data
communications systems. Extending distance, high data rate capabilities,
noise rejection and electrical isolation are just a few of the important
characteristics that make fiber optic technology ideal for use in industrial
applications.
Each fiber port has a TX (transmit) and RX (receive) connection fixed at
100Mbps speed. The fiber ports will support multi mode or single mode
fiber dependant on the model number ordered.

Quick Start Guide Documentation Number: ESW200series-1112qsg 11
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Power Input Connections
The ESW205/208 series accepts 12 to 36 VDC or 10 to 24 VAC input
voltage using removable terminal blocks.
UL Installation Information
Electrical Ratings
OUTPUT: All Models –Low Voltage, Limited Energy communications
protocol.
INPUT: ESW208, ESW208-XX
Power: [email protected] W
8 Copper 12 –36 [email protected] max
1 Fiber 12 –36 [email protected] max
4 Fiber 12 –36 [email protected] max.
8 Copper 12 –36 VAC@10.0W max
1 Fiber 12 –36 VAC@10.6W max
4 Fiber 12 –36 VAC@12.5W max.
47 –63Hz
INPUT: ESW205, ESW205-XX
Power: 24VDC@ 4.7W
12 –36 [email protected] max.
10 –[email protected] max
47 –63Hz

12 Quick Start Guide Documentation Number: ESW200series-1112qsg
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Wiring Terminals:
One Conductor Per Terminal
Use Copper wire only
Wire Range: 25 to 12 AWG
Tightening Torque: 4.5 Lb-in
Temperature rating of field wiring - 105℃minimum (Sized for
60℃Ampacity)
Ambient Temperature:
Standard Temperature Models –
-10℃to 60℃minimum/maximum surrounding air ambient. T4(or T4A)
This equipment is suitable for use in Class 1, Division 2, Groups A, B, C
and D hazardous locations, Or nonhazardous locations only.
WARNING –EXPLOSION HAZARD –Substitution of component may
impair suitability for Class 1, Division 2.
UL File Number: E245458

Quick Start Guide Documentation Number: ESW200series-1112qsg 13
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Specifications
Power Requirements
Low Voltage Range:
12 - 36 VDC
10 - 24 VAC
Connection
Power
Removable Terminal
Block
Protection
Reverse Polarity
Protection
Redundant Power
connectors
RJ45 Ports
Shielded
10Base-T / 100Base-TX
Auto-sensing
Full / Half Duplex
MDI / MDI-X auto-
Negotiate
Multi Mode Fiber
100Base-FX
Distance
2 km
Wavelength
1310 nm
Cable
50/125 um, 62.5/125 um
TX power
-23.5-14 dBm
Rec Sensitivity
-35 dBm
Connector Type
ST or SC
Cover
ST or SC
Single Mode Fiber
100Base-FX

14 Quick Start Guide Documentation Number: ESW200series-1112qsg
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Distance
20 km
Wavelength
1310 nm
Cable
9/125
TX power
-15 - 8 dBm
Rec Sensitivity
-35 dBm
Connector Type
ST or SC
Cover
ST or SC
LED Indicators
Power
Green ON solid
Power applied
Speed
Green ON solid
100 Mbps
Speed
Off
10Mbps
Link/Activity
Green ON Solid
Link
Link/Activity
Green flashing
Activity
Fiber Port
Green ON solid
100Mbps Link
Fiber Port
Green flashing
100Mbps Activity
Slim Metal Enclosure
Material
aluminum or steel
Rating
IP30
DIN Rail
35mm - installed on
switch
QTY 1
Panel Mounting
Bracket and screws -
included with switch
QTY 4
DIN and Panel
Accessories
DIN Rail and Panel mount
with screws.
Enclosure Dimensions
See Dimensional
Drawings
IEEE Standards
IEEE802.3
10Base-T Ethernet
IEEE802.3u
100BaseTX, 100Base FX
IEEE802.3x
Flow Control

Quick Start Guide Documentation Number: ESW200series-1112qsg 15
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Transfer Rate:
14,880bps (10Base-T),
148,800bps (100-Base-T)
Packet buffer
64k Byte
Address Table Size:
2K
Processing Type
Store and Forward
Broadcast Storm Control
Automatic
Flow Control
Full / Half Duplex Back
Pressure Flow Control
Agency Approvals
Hazardous Location
UL/cUL Class I Div 2 Groups A,B,C, and D
EMI
FCC Part 15, CISPR (EN55022)
Generic Standard for
(Heavy) Industrial
Environments
per EN61000-6-2
EMC
EN61000-4-2 (ESD),level 3
Contact +/- 6kv
Enclosure Air
+/- 8kv
EMC
EN61000-4-3 (RS),
level 3
10V/meter
EMC
EN61000-4-4 (EFT),
level 3
Signal ports
+/- 1kV
D.C. Power ports
+/- 2kV
A.C. Power ports
+/- 2kV
Earth ground ports3
NA
EMC
EN61000-4-5(Surge),
level3
Signal ports
+/- 1kV
D.C. Power ports
+/- 2kV
A.C. Power ports
+/- 2kV
EMC
EN61000-4-6 (CS),
level 3
Signal ports
10 V rms
D.C. Power ports
10 V rms
A.C. Power ports
10 V rms

16 Quick Start Guide Documentation Number: ESW200series-1112qsg
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] –www.bb-elec.com
B&B Electronics –Westlink Commercial Park –Oranmore, Galway, Ireland –Ph [phone] –Fax [phone] –www.bb-europe.com
Earth ground ports3
NA
Shock
IEC 60068-2-27
Vibration
IEC 60068-2-6
Free Fall
IEC 60068-2-32
Certifications
Certifications
IP30
Certifications
RoHS
Certifications
WEEE
Environment Limits
Standard Temp Models
-10˚C to 60˚C
Heavy
Industrial
Standard temp
Extended Temp (-T)
Models
-40˚C to 75˚C
Heavy
Industrial wide
temp
Storage Temperature
-40 to 85˚C
Ambient Relative
Humidity
10 to 95%(Non-condensing)