B&B Electronics Elinx EIRP410-2SFP-T User manual

Manual
Elinx EIRP410-2SFP-T
8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports
Unmanaged Din Rail Ethernet Switch

EIRP410-2SFP-T
Documentation Number: EIRP410-2SFP-T-0912m
International Headquarters:
707 Dayton Road
Ottawa, IL 61350 USA
Phone [phone]
Website: www.bb-elec.com
Sales e-mail: [e-mail]
Technical Support: [e-mail] –
European Headquarters
B&B Electronics
Westlink Commercial Park
Oranmore, Co. Galway, Ireland
Phone [phone]
Website: www.bb-europe.com
Sales e-mail: [e-mail]
Technical Support: [e-mail]
Original – April 2011
©2011 No part of this publication may be reproduced or transmitted in any form or by any means,electronic or mechanical, including photography, recording,or any
information storage and retrieval system without written consent.Information in this manual is subject to change without notice, and does not represent a commitment on
the part.
B&B Electronics Manufacturing shall not be liable for incidental orconsequential damages resulting from the furnishing,performance, or use of this manual. All brand
names used in this manual are the registered trademarks of their respective owners.The use of trademarks or otherdesignations in this publication is for reference
purposes only and does not constitute an endorsement by the trademark holder.

Manual Documentation Number: EIRP410-2SFP-T-0912m i
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Table of Contents
INTRODUCTION..................................................................................................................... 1
The EIRP410-2SFP-T is an industrial Managed Ethernet switch that has 8 10/100TX PoE ports and 2
10/100/1000T/Mini-GBIC Combo ports............................................................................................................................... 1
Features................................................................................................................................................................................... 1
Package Contents ................................................................................................................................................................... 2
HARDWARE DESCRIPTION.................................................................................................. 3
Physical Dimension ................................................................................................................................................................ 3
Front Panel ............................................................................................................................................................................. 3
Front Panel of the PoE Industrial Switch ............................................................................................................................ 3
Top View................................................................................................................................................................................. 4
Top View of the PoE Injectors Industrial SwitchLED Indicators ..................................................................................... 4
LED Indicators....................................................................................................................................................................... 5
Ports......................................................................................................................................................................................... 6
RJ-45 ports ........................................................................................................................................................................... 6
2 Mini-GBIC combo port..................................................................................................................................................... 8
Cabling.................................................................................................................................................................................... 8
Wiring the Power Inputs ..................................................................................................................................................... 11
Wiring the Fault Alarm Contact......................................................................................................................................... 11
MOUNTING INSTALLATION................................................................................................ 13
DIN-Rail Mounting .............................................................................................................................................................. 13
Wall Mount Plate Mounting................................................................................................................................................ 15
NETWORK APPLICATION................................................................................................... 16
Troubleshooting.................................................................................................................................................................... 17
TECHNICAL SPECIFICATION............................................................................................. 18

Manual Documentation Number: EIRP410-2SFP-T-0912m 1
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Introduction
The EIRP410-2SFP-T is an industrial Managed Ethernet switch that has 8 10/100TX PoE ports and 2 10/100/1000T/Mini-
GBIC Combo ports.
Features
•System Interface/Performance
oRJ-45 ports support Auto MDI/MDI-X Function
oEmbedded 8-ports PoE
oSFP (Mini-GBIC) supports 100/1000 Dual Mode
oStore-and-Forward Switching Architecture
oBack-plane (Switching Fabric): 5.6Gbps
o1Mbits Packet Buffer
o8K MAC Address Table
oSupports Wide Operating Temperature (-40oC ~ 75oC)
•Power Supply
oRedundant Power Design
•Case/Installation
oIP-30 Protection
oDIN Rail and Wall Mount Design
•Relay Alarm
oRelay output for port breakdown, power fail and alarm

Manual Documentation Number: EIRP410-2SFP-T-0912m 2
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Package Contents
•8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports Industrial Switch
•User manual
•Pluggable Terminal Block
•2 wall mount plates and 6 screws
•One DIN-Rail (attached on the switch)
8 10/100TX + 2 10/100/1000T/100/1000 SFP Combo with 8 PoE Injectors Industrial Switch
User Manual block connector
Wall Mount Plate Screws DIN-Rail

Manual Documentation Number: EIRP410-2SFP-T-0912m 3
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Hardware Description
The following information is an introduction to the Industrial switch’s hardware spec, port, cabling information, and
wiring installation will be described.
Physical Dimension
8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports Industrial Switch dimension (W x D x H) are
72mm x 105mm x 152mm
Front Panel
The Front Panel of the 8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports Industrial Switch is shown
as below:
Front Panel of the PoE Industrial Switch

Manual Documentation Number: EIRP410-2SFP-T-0912m 4
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Top View
The top view of the 8 Ports10/100 PoE with 2 combo 10/100/1000 or 100/1000 SFP Ports Industrial Switch has one
terminal block connector of two DC power inputs.
Top View of the PoE Injectors Industrial Switch

Manual Documentation Number: EIRP410-2SFP-T-0912m 5
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
LED Indicators
The diagnostic LEDs located on the front panel of the industrial switch provide real-time information of operation and
status. The following table provides the description of the LED status and their meanings for the switch.
LED Status Meaning
PWR1
Green
Power 1 is active
OFF
No power inputs
PWR2
Green
Power 2 is active
OFF
No power inputs
Fault Red Power input 1 or 2 is inactive
OFF Power 1 & Power 2 are both active or no power inputs
P9, P10 (RJ-45)
Upper
LED
Green Connected to network
Blinking Networking is active
OFF Not connected to network
Lower
LED
Green The port is operating at speed of 1000M
OFF The port is disconnected or not operating at speed of 1000M
Link/Active
(P9, P10)
Green
SFP port is linking
Blinks
Data is transmitting or receiving
OFF
Not connected to network
P1 ~ P8
(Green)
Green
Connected to network
Blinking Networking is active
OFF
Not connected to network
P1 ~ P8
(Yellow)
Yellow Ethernet port full duplex
Blinking Collision of packet occurs
OFF Ethernet port half duplex or not connected to network
FWD (P1 ~ P8) Green
A powered device is connected utilizing Power over Ethernet on
the port
OFF
No device is connected or power forwarding fails

Manual Documentation Number: EIRP410-2SFP-T-0912m 6
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Ports
RJ-45 ports
The RJ45 copper ports support auto MDI/MDIX operation. This feature allows network connections to computers, servers, or
other switches using straight-through or crossover cables (See Figure below). Straight-through cable connections: pins 1, 2, 3
and 6, at one end of the cable, are connected straight-through to pins 1, 2, 3 and 6 at the other end of the cable. The table below
shows the 10BASE-T/100BASE-TX MDI and MDI-X port pin outs.

Manual Documentation Number: EIRP410-2SFP-T-0912m 7
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Cross Over Cable Schematic

Manual Documentation Number: EIRP410-2SFP-T-0912m 8
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
2 Mini-GBIC combo port
2 auto-detect combo Giga ports — RF45 or fiber. The gigabit Ethernet ports are shared with the mini-GBIC ports. RJ45
UTP (Gigabit Ethernet) ports can operate in half/full-duplex modes and work at speeds of 10/100/1000Mbps that support
auto-sensing technology to enable each port to detect the connecting speed. The mini-GBIC port is a socket for a mini-
GBIC (SFP) fiber transceiver.
Cabling
•Use four twisted-pair, Category 5e or above cabling for RJ-45 port connection. The cable between the switch and
the link partner (switch, hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
•Use the mini-GBIC ports to uplink to another switch by inserting the mini-GBIC (SFP) transceiver.
To connect the transceiver and LC cable, please follow the steps shown below:
First, insert the transceiver into the SFP module. Notice that the triangle mark is the bottom of the module.
Figure 2.8: Transceiver to the SFP module

Manual Documentation Number: EIRP410-2SFP-T-0912m 9
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Figure 2.9: Transceiver Inserted
Second, insert the fiber cable LC connector into the transceiver.
Figure 2.10: LC connector to the transceiver
To remove the LC connector from the transceiver, press the upper side of the LC connector to release from the
transceiver and pull it out.

Manual Documentation Number: EIRP410-2SFP-T-0912m 10
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Figure 2.11: Remove LC connector
Second, push down the metal loop and pull the transceiver out by the plastic handle.
Figure 2.12: Pull out from the transceiver

Manual Documentation Number: EIRP410-2SFP-T-0912m 11
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Wiring the Power Inputs
Wiring the Fault Alarm Contact
The fault alarm contact wired to pins 3 and 4 of the terminal block connector as the picture shows below. When the wires
are inserting the connected device will detect the fault status. The fault status includes power failure or port link failure.
Once one of the mentioned states occur an open circuit will exist. An application example for the fault alarm contact is
shown on the next page:
Note
The wire gauge for the terminal block should be in the range between
12-24 AWG.

Manual Documentation Number: EIRP410-2SFP-T-0912m 12
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com

Manual Documentation Number: EIRP410-2SFP-T-0912m 13
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Mounting Installation
DIN-Rail Mounting
The DIN-Rail is installed at the factory and maybe removed if needed.
1. First, insert the top of the DIN-Rail into the track.
Rear Panel of the switch
DIN-Rail

Manual Documentation Number: EIRP410-2SFP-T-0912m 14
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
2. Lightly push the DIN-Rail into the track.
3. Check the DIN-Rail to insure proper fit.
4. To remove the industrial switch from the track, reverse steps above.

Manual Documentation Number: EIRP410-2SFP-T-0912m 15
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Wall Mount Plate Mounting
1. Remove the DIN-Rail from the industrial switch.
2. Install the wall mount plate on the rear panel of the industrial switch.

Manual Documentation Number: EIRP410-2SFP-T-0912m 16
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Network Application
This segment provides the samples to help user have more actual idea of industrial switch application. For a sample application
of the industrial switch, see the figures below.