B&B Electronics EIP308 User manual

EIP308-1904ds - 1/2
International Headquarters:
707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax [phone] www.bb-elec.com [email protected] [email protected]
Westlink Commercial Park Oranmore Co. Galway Ireland
[phone] Fax [phone] www.bb-europe.com [e-mail] [e-mail]
Your Serial and Data Communication Ex
p
erts B&B ELECTRONICS PRODUCT INFORMATION
Model EIP308
8-Port 10/100
Ethernet Switch
Description
ModeI EIP308 is an 8-port 10/100 switch designed for the not-so-friendly industrial environment. The unit is housed in a
rugged metal enclosure ready to be mounted on a DIN rail or panel. The switch is an unmanaged Layer 2 switch that
provides auto MDI/MDIX crossover for easy plug-and-play applications.
LEDs indicate power, speed and link/activity for easy visual diagnostics. External power supply is connected to three 2-
position pluggable terminal blocks. A 9-30 VDC is the main power supply input. It also has a redundant 9-30 VDC for
secondary DC source. If that is not enough, 24 VAC yields the third option for power supply. B&B Electronics’ power supply
model 12DC1AST (9-30 VDC @ 1000mA) is required, not included.
Features
•Fully IEEE 802.3 and 802.3u compliant •Vertical or flat panel mountable
•8-port unmanaged Layer 2 switch •Wide power input 9-30 VDC
•Auto detecting 10BaseT/100BaseTX •Redundant wide power input 9-30 VDC
•Auto MDI/MDIX crossover for plug and play •24 VAC power input
•Ruggedized metallic enclosure •Speed and link/activity diagnostic LEDs
•DIN rail mount with #DRAD35 adapters •Unique load LED’s for quick network status
Applications
•Building automation •Process control
•Ethernet I/O •Motion control
•Remote data acquisition •Environmental control
•Communications gateway •Machine monitoring
•PLC and operator interface •Factory floor Ethernet networks
Connections
Standard RJ45 female connectors are provided. Standard RJ45 plug cables are all that is necessary to connect your
devices since the switch supports auto crossover. External power supply is connected using one of the three 2-position
pluggable terminal blocks for convenience. Table 1 shows the RJ45 pinouts and Table 2 shows the LED indicators.
Table 1
Pin Number Signal
1 TX+
2 TX-
3 RX+
4 not used
5 not used
6 RX-
7 not used
8 not used
Table 2
LED Color On Off Blinking
SPD yellow 100 10 reset/error
LNK green link no link data
PWR red power no power NA
PWR
LNK/ACT SPD

EIP308-1904ds - 2/2
International Headquarters:
707 Dayton Road P.O. Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax [phone] www.bb-elec.com [email protected] [email protected]
Westlink Commercial Park Oranmore Co. Galway Ireland
[phone] Fax [phone] www.bb-europe.com [e-mail] [e-mail]
Your Serial and Data Communication Ex
p
erts B&B ELECTRONICS PRODUCT INFORMATION
PLUGGABLE
TERMINAL
BLOCK
12DC1AST
12VDC@1000MA
12.5% 25% 50% 50+%
PWR
LNK/ACT SPD
PORT 1
UPLINK
PORT 2
PORT 3 PORT 4 PORT 5
11.5mm
1.00 in
2.35 in
07mm
4.70 in
10.5mm
03.5mm
6.48 in
LOAD
PORT 6 PORT 7 PORT 8
1.36 in
Specification Summary
Switch Type: Full IEEE 802.3, 802.3u, & 802.3x compliant
Unmanaged Layer 2
Main Features: Store-and-forward scheme for packet transfer
Automatic address learning, aging and migration
Packet classification 802.1p QoS priority queues
Port-based VLAN
Speed: Autodetecting 10/100 Mbps
LED: Per port speed indicator
Per port activity indicator
Per unit power indicator
Network load indicator (12%, 25%, 50%, 50+%)
Frame Buffer: 256KB share by all ports
MAC Buffer: 2KB (automatic learning, aging and migration)
Isolation: 1500 VDC isolation magnetics
Bandwidth: 1.4 Gbps high performance memory bandwidth
Connections: 8RJ45 female jacks (auto MDI/MDIX crossover)
2-position pluggable terminal block x 3
Power Required: Main DC = 9 – 30 VDC @ 6 W maximum
Redundant DC = 9 – 30 VDC @ 6 W maximum
Auxiliary AC = 24 VAC @ 6 W maximum
Approval: FCC Class A, CE, shock, free fall, vibration
Temperature: 0 to 70°C (32 to 158°F)
Dimensions: 16.5 x 11.9 x 3.5 cm (6.5 x 4.7 x 1.4 in)
DECLARATION OF CONFORMITY
Manufacturer’s Name: B&B Electronics Manufacturing Company
Manufacturer’s Address: P.O. Box 1040
707 Dayton Road
Ottawa, IL 61350 USA
Model Number: EIP308
Description: 8 Port 10/100 Ethernet Switch
Type: Light industrial ITE equipment
Application of Council Directive: 89/336/EEC
Standards: EN 55022
EN 61000-6-1
EN 61000 (-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11)
IEC60068-2-27
IEC60068-2-32
IEC60068-2-6
William H. Franklin III, Director of Engineering