B&B Electronics EIR610-3SFP-T Technical specifications

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Product Description
Model EIR610-3SFP-T
Documentation Number: EIR610-3SFP-T_0708m
707 Dayton Road -- P.O. Box 1040 -- Ottawa, IL 61350 USA
Phone [phone] -- General Fax [phone]
Phone [phone] -- General Fax [phone]
Website: www.bb-elec.com
Sales e-mail: [e-mail] -- Fax [phone]
Technical Support e-mail: [e-mail] -- Fax [phone]
European Headquarters
B&B Electronics
Westlink Commercial Park -- Oranmore, Co. Galway, Ireland
Phone [phone] -- Fax [phone]
Website: www.bb-europe.com
Sales e-mail: [e-mail]
Technical Support e-mail: suppo[email protected]
© 2008 B&B Electronics Mfg. Co. Inc. - Revised February 2008

B&B Electronics Mfg Co Inc
–
707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
–
www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Eight Port Managed Industrial
Ethernet Switches
User Manual

Manual Documentation Number: EIR610-3SFP-T_0708M Table of Contents
vii
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
FCC
This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE
This is a Class-A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

B&B Electronics Mfg Co Inc
–
707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
–
www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Content
Overview.....................................................................1
Introduction...............................................................1
Features...................................................................2
Packing List..............................................................4
Hardware Description................................................5
Physical Dimensions (W x H x D) ............................5
Front Panel...............................................................5
Top View ..................................................................6
Wiring the Power Inputs...........................................6
Wiring the Fault Alarm Contact................................7
LED Indicators..........................................................8
Ports.........................................................................9
Cabling...................................................................11
Mounting Installation...............................................14
DIN-Rail Mounting..................................................14
Panel Mounting ......................................................15
Hardware Installation...............................................16
Installation Steps....................................................16

Manual Documentation Number: EIR610-3SFP-T_0708M Table of Contents
ix
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
X-Ring Application..................................................17
Coupling Ring Application......................................18
Dual Homing Application........................................18
Console Management..............................................19
Connecting to the Console Port.............................19
Pin Assignment ......................................................19
Login in the Console Interface ...............................20
CLI Management....................................................21
Commands Level .............................................................22
Commands Set List..........................................................23
System Commands Set....................................................23
Port Commands Set.........................................................26
Trunk Commands Set ......................................................28
VLAN Commands Set ......................................................29
Spanning Tree Commands Set........................................31
QOS Commands Set........................................................34
IGMP Commands Set.......................................................34
Mac / Filter Table Commands Set....................................35
SNMP Commands Set .....................................................36
Port Mirroring Commands Set..........................................38

B&B Electronics Mfg Co Inc
–
707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
–
www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
802.1x Commands Set.....................................................39
TFTP Commands Set.......................................................41
SystemLog, SMTP and Event Commands Set.................42
SNTP Commands Set......................................................43
X-ring Commands Set......................................................44
Web-Based Management ........................................46
About Web-based Management ............................46
Preparing for Web Management............................46
System Login..........................................................46
Main interface.........................................................47
System Information ................................................48
IP Configuration......................................................48
DHCP Server – System configuration....................49
DHCP Client Entries...............................................50
DHCP Server - Port and IP Bindings .....................50
TFTP - Update Firmware........................................51
TFTP – Restore Configuration ...............................52
TFTP - Backup Configuration.................................52
System Event Log – Syslog Configuration.............53
System Event Log - SMTP Configuration ..............54

Manual Documentation Number: EIR610-3SFP-T_0708M Table of Contents
xi
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
System Event Log - Event Configuration...............55
Fault Relay Alarm...................................................57
SNTP Configuration ...............................................57
IP Security..............................................................60
User Authentication................................................61
Digital Input/Output.................................................62
Port Statistics .........................................................63
Port Control............................................................64
Port Trunk...............................................................65
Aggregator setting............................................................65
Aggregator Information.....................................................66
State Activity.....................................................................67
Port Mirroring..........................................................68
Rate Limiting ..........................................................69
VLAN configuration ................................................70
VLAN configuration - Port-based VLAN ...........................70
802.1Q VLAN...................................................................72
Rapid Spanning Tree .............................................75
RSTP - System Configuration ..........................................75

B&B Electronics Mfg Co Inc
–
707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
–
www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
RSTP - Port Configuration................................................77
SNMP Configuration...............................................78
System Configuration.......................................................78
Trap Configuration............................................................79
SNMPV3 Configuration ....................................................80
QoS Configuration..................................................83
QoS Policy and Priority Type............................................83
Port Base Priority .............................................................84
COS Configuration ...........................................................85
TOS Configuration............................................................85
IGMP Configuration................................................85
X-Ring ....................................................................87
Security ..................................................................89
802.1X/Radius Configuration............................................89
MAC Address Table .........................................................92
Factory Default.......................................................95
Save Configuration.................................................95
System Reboot.......................................................95
Trouble shooting......................................................96
Technical Specifications.........................................97

ManualDocumentationNumber:EIR610-3SFP-T_0708M 1
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Overview
Introduction
This managed industrial switch comes equipped with a proprietary
redundant network protocol—X-Ring which provides an easy way to
establish a redundant Ethernet network. With ultra high-speed recovery
time (less than 300 ms) and a long MTBF (Mean Time Between Failures)
the industrial switch will continue to operate until a Gigabit network
infrastructure has been established, without requiring extra upgrade
costs.
In addition to10/100/1000Base-TX fast Ethernet ports, the switch has
SFP (mini-GBIC) ports. Traditional RJ-45 ports can be used for up linking
short distance (less than 100 m) wide-band paths, while the SFP slots
can be used for the application of wideband uploading and long distance
transmissions adding flexibility.

2 Manual Documentation Number: EIR610-3SFP-T_0708M
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Features
10/100/1000Base-T Mbps Ethernet ports
SFP (mini-GBIC) ports (support 100/1000 Dual Mode)
Full/half duplex flow control
Auto-negotiation
MDI/MDI-X auto-crossover
Packet Buffer up to 1Mbits
MAC Address up to 8Kbytes
Surge (EFT) protection (3,000 VDC for power line)
Ethernet EDS protection (4,000 VDC)
Power Supply
¾Wide-range Redundant Power Design
¾Reverse Polarity Protection
¾Overload Current Protection
Case/Installation
¾IP-30 Protection
¾DIN Rail and Panel Mount Design
Spanning Tree
¾IEEE802.1d Spanning Tree
¾IEEE802.1w Rapid Spanning Tree
VLAN
¾Port Based VLAN
¾802.1 Q Tag VLAN
¾GVRP
X-Ring
¾X-Ring, Dual Homing, Couple Ring and Dual Ring Topology
¾Provide redundant backup feature and the recovery time below
300ms
Port Trunk with LACP
QoS (Quality of Service)
¾IEEE 802.1p Class of Service
¾4 Priority queues per port
¾Port Base, Tag Base and Type of Service Priority
Bandwidth Control
¾Ingress Packet Filter and Egress Rate Limit
¾Broadcast/Multicast Packet Filter Control
Port Mirror: Monitor traffic in switched networks.
¾TX Packet only
¾RX Packet only

ManualDocumentationNumber:EIR610-3SFP-T_0708M 3
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
¾Both of TX and RX Packet
System Event Log
¾System Log Server/Client
¾SMTP e-mail Alert
¾Relay Alarm Output System Events
Security
¾Port Security: MAC address entries/filter
¾IP Security: IP address security management to prevent intrusion.
¾Login Security: IEEE802.1X/RADIUS
SNMP Trap
¾Cold Start
¾Power Status
¾Authentication Failure
¾X-Ring topology Change
¾Link up / Link down
IGMP with Query mode for Multi Media Application
TFTP Firmware Update and System Configure Restore and Backup

4 Manual Documentation Number: EIR610-3SFP-T_0708M
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Packing List
1 x Managed Industrial Switch
1 x RS-232 DB9 to RJ-45 adapter
1 x CD Rom with this user manual
2 x Mounting Bracket and Screws

ManualDocumentationNumber:EIR610-3SFP-T_0708M 5
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Hardware Description
Physical Dimensions (W x H x D)
2.7 x 4.2 x 6.4 in (7.4 x 10.7 x 16.3 cm)
Front Panel

6 Manual Documentation Number: EIR610-3SFP-T_0708M
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Top View
Wiring the Power Inputs
Insert the positive and negative leads into the V+ and V- contacts on the
terminal block connector.
Tighten the wire-clamp screws
Note Use 12 to 14 AWG wire

ManualDocumentationNumber:EIR610-3SFP-T_0708M 7
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Insert the wires into the fault alarm contact
Wiring the Fault Alarm Contact
[NOTE] Use 12 to 24 AWG wire.
[NOTE] Relay contacts are normally closed.
[NOTE] The Relay Alarm also requires software configuration. Refer to the
Web Based Management Fault Relay Alarm Section.

8 Manual Documentation Number: EIR610-3SFP-T_0708M
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
LED Indicators
LED Status Meaning
PWR Green The switch is on
Off No power available
PWR1 Green Power Source 1 available
Off Power Source 1 unavailable
PWR2 Green Power Source 2 available
Off Power Source 2 unavailable
Fault Red Power failure or port failure
Off Normal Operation
R.M.
Green The switch is the master of the X-Ring
group
Off The switch is not a ring master in the
X-Ring group
LNK/ACT
(for P9, P10
SFP)
Green SFP port is linked
Blinks Networking is active
Off No device attached
P9, P10 (RJ-45)
Green
(Upper LED) Network device detected
Blinking
(Upper LED) Network is active
Off
(Upper LED) No device detected
Green
(Lower LED) The port is operating at speed of 1000M

ManualDocumentationNumber:EIR610-3SFP-T_0708M 9
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Off
(lower LED)
The port is disconnected or not operating
at speed of 1000M
P1 ~ P8
Green
(Upper LED) Network device detected
Blinking
(Upper LED) Network is active
Off
(Upper LED) No device attached
Yellow
(Lower LED) The port is operating in full-duplex mode
Blinking
(Lower LED) Data packet collision
Off
(Lower LED)
The port is in half-duplex mode or no
device attached
Ports
RJ-45 ports (Auto MDI/MDIX): The RJ-45 ports are auto-sensing for
10Base-T, 100Base-TX or 1000Base-T devices connections and Auto
MDI/MDIX.
RJ-45 Pin Assignments
Pin Number Assignment
1 Tx+
2 Tx-
3 Rx+
6 Rx-

10 Manual Documentation Number: EIR610-3SFP-T_0708M
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
All ports on this industrial switch support automatic MDI/MDI-X operation.
You can use straight-through cables (See Figure below) for all network
connections to PCs or servers, or to other switches or hubs. In
straight-through cable, pins 1, 2, 3, and 6, at one end of the cable, are
connected straight through to pins 1, 2, 3 and 6 at the other end of the
cable. The 10BASE-T/100BASE-TX/1000BASE-T MDI and MDI-X port
pin outs are as tabled below.
Pin MDI-X Signal Name MDI Signal Name
1 Receive Data plus (RD+) Transmit Data plus (TD+)
2 Receive Data minus (RD-) Transmit Data minus (TD-)
3 Transmit Data plus (TD+) Receive Data plus (RD+)
6 Transmit Data minus (TD-) Receive Data minus (RD-)
Straight Through Cable Schematic
Cross Over Cable Schematic

Manual Documentation Number: EIR610-3SFP-T_0708M 11
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Cabling
Use the four twisted-pair, Category 5e or above cabling for RJ-45 port
connection. The cable between the switch and the link partner (switch,
hub, workstation, etc.) must be less than 100 meters (328 ft.) long.
The small form-factor pluggable (SFP) is a compact optical transceiver
used in optical communications for both telecommunication and data
communication applications.
Follow these steps to connect the transceiver and LC Cable:
First, insert the transceiver into the SFP module. A triangle is marked on
the bottom of the module.
Transceiver to the SFP module
Transceiver Inserted

12 Manual Documentation Number: EIR610-3SFP-T_0708M
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Second, insert the fiber cable of LC connector into the transceiver.
LC connector to the transceiver
To remove the LC connector from the transceiver, follow the steps shown
below:
First, press the upper side of the LC connector from the transceiver and
pull it out to release.
Remove LC connector