B&B Electronics Elinx EIRHP305-T User manual

Manual
Elinx EIRHP305-T
5 Ports10/100 with 4 PoE Ports
Unmanaged Din Rail Ethernet Switch

EIRHP305-T
Documentation Number: EIRHP305-T-1712m
International Headquarters:
707 Dayton Road
Ottawa, IL 61350 USA
Phone [phone]
Website: www.bb-elec.com
Sales e-mail: [e-mail]
Technical Support: suppo[email protected]ec.com –
B&B Electronics
European Headquarters
Westlink Commercial Park
Oranmore, Co. Galway, Ireland
Phone [phone]
Website: www.bb-europe.com
Sales e-mail: [e-mail]
Technical Support: [e-mail]
Original – April 2011
©2011 No partof this publication may be reproduced or transmitted inany form or by any means,
electronic or mechanical, including photography, recording, or any information storage and retrieval
system without written consent. Information in this manual is subject to change without notice, and does
not representa commitmenton the part.
B&B Electronics Manufacturing shall not be liable for incidental or consequentialdamages resulting from
the furnishing, performance, or use of thismanual. All brandnamesused in this manual are the
registered trademarks of their respective owners. The use of trademarks or other designations in this
publication is forreference purposesonlyand does not constitute an endorsementby the trademark
holder.

i
Table of Contents
OVERVIEW...................................................................1
Features.......................................................................................................1
HARDWARE DESCRIPTION........................................3
Dimensions..................................................................................................3
Front Panel .................................................................................................4
Top View .....................................................................................................4
LED Indicators...........................................................................................5
RJ45.............................................................................................................6
Cabling ........................................................................................................8
Wiring the Power Inputs ...........................................................................8
MOUNTING INSTALLATION.......................................9
DIN-Rail Mounting ....................................................................................9
Hanging the Industrial Switch ................................................................10
Wall-Mount Plate Mounting ...................................................................11
Hardware Installation Diagram..............................................................12
Troubleshooting........................................................................................13
Technical Specification ............................................................................14

Manual Documentation Number: EIRHP305-T-1712m 1
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Overview
B&B Electronics PoE Ethernet switch, 5 port 10/100TX with 4 offering
High-Power (25W) PoE ports. The Industrial Switch is a cost-effective
solution which meets the high reliability requirements demanded by
industrial applications. The Ethernet switch supports wide temperature -
40°C - 75°C environments. The PoE feature meets IEEE 802.3af pre-
standard, which supports 25 watts @ 48VDC on each PoE port.
Features
• System Interface/Performance
o RJ-45 ports support Auto MDI/MDI-X Function
o Embedded 4-ports PoE
o Store-and-Forward Switching Architecture
o Back-plane (Switching Fabric): 1.0Gbps
o 2K MAC Address Table
• Power Input
o DC 48V Redundant Power Input
• Operating Temperature
o Wide Operating Temp: -40°C -75°C
• Case/Installation
o IP-30 Protection
o Installation in a Pollution Degree 2 environment
o DIN Rail and Wall Mount Design
• Provides EFT protection 3,000 VDC for power line
• Supports 6,000 VDC Ethernet ESD protection

2 Manual Documentation Number: EIRHP305-T-1712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Package Contents
• 5 port 10/100TX with 4 Port High-Power (25W) PoE Industrial
Switch (with DIN-Rail Bracket)
• User manual
• Removable Terminal Block
• Wall-mount Kit (2 wall-mount bracket with screws)

Manual Documentation Number: EIRHP305-T-1712m 3
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Hardware Description
The following information is an introduction to the PoE Industrial Ethernet
Switch dimensions, port, cabling information, and wiring installation.
Dimensions
5 port 10/100T(X) with 4 High-Power (25W) PoE ports Industrial Switch
dimensions (W x D x H) is 48.60mm x 95mm x 140mm, the detail
dimensions as Figure-1
Figure-1: Mechanical Dimensions

4 Manual Documentation Number: EIRHP305-T-1712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Front Panel
The Front Panel of the 5 port 10/100TX with 4 Port High-Power (25W)
PoE Industrial Switch is shown below Figure-2
Figure-2: Front Panel of the Switch
Top View
The top view displays one terminal block connector, which allows wiring
of two DC power inputs and a Relay circuit contact. Please refer to Figure-
3for further information.
Figure-3: Top View of the Switch

Manual Documentation Number: EIRHP305-T-1712m 5
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
LED Indicators
The diagnostic LEDs located on the front panel of the industrial switch
provide real-time information of system and operation status. Table-1
provides the description of the LEDs status and their definitions.
Wiring the Power Inputs
Table-1: LED Indication Definition

6 Manual Documentation Number: EIRHP305-T-1712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
RJ45
The RJ45 copper ports support auto MDI/MDIX operation. This feature
allows network connections to computers, servers, or other switches using
straight-through or crossover cables (See Figure below). Straight-through
cable connections: pins 1, 2, 3 and 6, at one end of the cable, are connected
straight-through to pins 1, 2, 3 and 6 at the other end of the cable. The table
below shows the 10BASE-T/100BASE-TX MDI and MDI-X port pin outs.

Manual Documentation Number: EIRHP305-T-1712m 7
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com

8 Manual Documentation Number: EIRHP305-T-1712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Cabling
Use unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable for
RJ-45 connections: 100ΩCategory 3, 4 or 5 cable for 10Mbps
connections, 100ΩCategory 5 cable for 100Mbps, or 100ΩCategory
5e/above cable for 1000Mbps connections.
The cable between the switch and the link partner (switch, hub,
workstation, etc.) must be less than 100 meters (328 ft.) long.
Wiring the Power Inputs
Note:
1. Terminal blocks are rated for 12-24 AWG wire
2. Use copper conductors, 60/75oC. Tighten to 5 lb in.
V- V+
V- V+

Manual Documentation Number: EIRHP305-T-1712m 9
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Mounting Installation
DIN-Rail Mounting
Assembling the DIN-Rail Clip
Rear Panel of the
switch
DIN-rail clip

10 Manual Documentation Number: EIRHP305-T-1712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Hanging the Industrial Switch
First, position the din-rail clip of the switch directly in front of the DIN rail.
Make sure the top of the clip hooks over the top of the DIN rail.
Push the unit downward.
Check the DIN-Rail clip is tightly fixed on the DIN rail.
To remove the industrial switch from the track, reverse the steps above.

Manual Documentation Number: EIRHP305-T-1712m 11
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Wall-Mount Plate Mounting
1. When using the wall mount plates the din-rail clip can be
removed.
2. Place the wall-mount plates on the rear panel of the industrial
switch and fasten the screws.
Wall-Mount Bracket Dimensions

12 Manual Documentation Number: EIRHP305-T-1712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Hardware Installation Diagram

Manual Documentation Number: EIRHP305-T-1712m 13
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Troubleshooting
• Do not use the power adapter with DC output higher than the power
rating of the device.
• Select the proper UTP/STP cable to construct your network. Use
unshielded twisted-pair (UTP) or shielded twisted-pair (STP) cable
for RJ-45 connections: 100ΩCategory 3, 4 or 5 cable for 10Mbps
connections, 100ΩCategory 5 cable for 100Mbps, or 100Ω
Category 5e/above cable for 1000Mbps connections. Insure the
length of any twisted-pair connection does not exceed 100 meters
(328 feet).
• Diagnosing LED Indicators:The Switch can be easily monitored
through panel LED’s. The LED’s will provide an easy way of
detecting power or communication problems.
• During loss or no communications verify the Industrial switch LED
indicators are displaying normal operating status. Next perform the
ping test to confirm connection and status of device connections on
the network.

14 Manual Documentation Number: EIRHP305-T-1712m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Technical Specification
The 5 port 10/100TX with 4 port High-Power (25W) PoE Industrial Switch
technical specifications is shown as below.

Manual Documentation Number: EIRHP305-T-1712m 15
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com