B&B Electronics Elinx EIR510-2MC-T User manual

ManualDocumentationNumber:EIR510-2xx-T-0708m
1
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Product Description
Model EIR510-2xx-T
Documentation Number: EIR510-2xx-T_0708m
707 Dayton Road -- P.O. Box 1040 -- Ottawa, IL 61350 USA
Phone [phone] -- General Fax [phone]
Phone [phone] -- General Fax [phone]
Website: www.bb-elec.com
Sales e-mail: orde[email protected]om -- Fax [phone]
Technical Support e-mail: [e-mail] -- Fax [phone]
European Headquarters
B&B Electronics
Westlink Commercial Park -- Oranmore, Co. Galway, Ireland
Phone [phone] -- Fax [phone]
Website: www.bb-europe.com
Sales e-mail: [e-mail]
Technical Support e-mail: suppo[email protected]
© 2008 B&B Electronics Mfg. Co. Inc. - Revised February 2008

B&B Electronics Mfg Co Inc
–
707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
–
www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Ten Port Managed Industrial
Ethernet Switches
User Manual

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
FCC
This Equipment has been tested and found to comply with the limits for a
Class-A digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CE
This is a Class-A product. In a domestic environment this product may
cause radio interference in which case the user may be required to take
adequate measures.

B&B Electronics Mfg Co Inc
–
707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
–
www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Content
Introduction................................................................1
Features...................................................................1
Package Contents....................................................3
Hardware Description................................................4
Physical Dimension (W x D x H)..............................4
Front Panel...............................................................4
Bottom View.............................................................5
LED Indicators..........................................................6
Ports.........................................................................7
Cabling.....................................................................9
Wiring the Power Inputs.........................................10
Wiring the Fault Alarm Contact..............................11
Mounting Installation...............................................12
DIN-Rail Mounting..................................................12
Panel Mounting ......................................................14
Hardware Installation ..............................................15
Installation Steps....................................................15
Network Application................................................16

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
X-Ring Application..................................................16
Coupling Ring Application......................................17
Dual Homing Application........................................18
Console Management..............................................19
Connecting to the Console Port.............................19
Login in the Console Interface ...............................19
CLI Management....................................................20
Commands Level .............................................................21
Commands Set List..........................................................22
Web-Based Management ........................................46
About Web-based Management ............................46
Preparing for Web Management............................46
System Login..........................................................47
System Information ................................................48
IP Configuration .....................................................48
DHCP Server – System configuration....................49
DHCP Client – System Configuration ....................50
DHCP Server - Port and IP Bindings .....................50
TFTP - Update Firmware .......................................51

B&B Electronics Mfg Co Inc
–
707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
–
www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
TFTP – Restore Configuration...............................52
TFTP - Backup Configuration.................................52
System Event Log – Syslog Configuration.............53
System Event Log - SMTP Configuration ..............54
System Event Log - Event Configuration...............55
Fault Relay Alarm...................................................56
SNTP Configuration ...............................................57
IP Security..............................................................60
User Authentication................................................61
Port Statistics .........................................................61
Port Control............................................................62
Port Trunk...............................................................63
Aggregator setting............................................................63
Aggregator Information.....................................................65
State Activity.....................................................................65
Port Mirroring..........................................................66
Rate Limiting ..........................................................67
VLAN configuration................................................68
VLAN configuration - Port-based VLAN ...........................69
802.1Q VLAN...................................................................71

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Rapid Spanning Tree .............................................73
RSTP System Configuration.............................................73
RSTP Port Configuration..................................................75
SNMP Configuration ..............................................76
System Configuration.......................................................76
Trap Configuration............................................................77
SNMPV3 Configuration ....................................................78
QoS Configuration..................................................81
QoS Policy and Priority Type ...........................................81
Port Base Priority .............................................................83
COS Configuration...........................................................83
TOS Configuration............................................................83
IGMP Configuration................................................84
X-Ring ....................................................................85
802.1X/Radius Configuration ...........................................87
MAC Address Table .........................................................90
Factory Default.......................................................92
Save Configuration.................................................93
System Reboot.......................................................93
Trouble shooting......................................................94

B&B Electronics Mfg Co Inc
–
707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
–
www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Technical Specification...........................................95

ManualDocumentationNumber:EIR510-xSFP-T_0708m 1
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Introduction
This managed industrial switch is a cost-effective solution and meets the
high reliability requirements demanded by industrial applications. The 8
10/100TX plus 2 100FX managed industrial switch can be easily managed
through a Web GUI. The fiber ports extend the connection distance,
increasing network elasticity and performance.
Features
System Interface/Performance
¾RJ-45 ports with Auto MDI/MDI-X
¾Store-and-Forward Switching Architecture
¾Back-plane (Switching Fabric): 2Gbps
¾1Mbits Packet Buffer
¾8K MAC Address Table
Power Supply
¾Wide-range Redundant Power Design
¾Reverse Polarity Protection
VLAN
¾Port Based VLAN
¾Support 802.1 Q Tag VLAN
¾GVRP
Port Trunk with LACP
QoS (Quality of Service)
¾IEEE 802.1p Class of Service,
¾4 priority queues per port
¾Port Base, Tag Base and Type of Service
Port Mirror: Monitor traffic in switched networks.
¾TX Packet only
¾RX Packet only
¾TX and RX Packet

2 Manual Documentation Number: EIR510-xSFP-T_0708m
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Security
¾Port Security : MAC address entries/filter
¾IP Security : IP address security management
¾Login Security: IEEE802.1X/RADIUS
IGMP with Query mode for Multi Media Application
Case/Installation
¾IP-30 Protection
¾DIN Rail and Panel Mount Design
Spanning Tree
¾IEEE802.1d Spanning Tree
¾IEEE802.1w Rapid Spanning Tree
X-ring
¾X-ring, Dual Homing, and Couple Ring Topology
¾Redundant backup feature with recovery time below 300ms
Bandwidth Control
¾Ingress Packet Filter and Egress Rate Limit
¾Broadcast/Multicast Packet Filter Control
System Event Log
¾System Log Server/Client
¾SMTP e-mail Alert
¾Relay Alarm Output System Events
SNMP Trap
¾Cold Start
¾Power status
¾Authentication failure
¾X-ring topology changed
¾Port Link up/Link down
TFTP Firmware Update, System Configuration backup and restoration.

ManualDocumentationNumber:EIR510-xSFP-T_0708m 3
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Package Contents
One Managed industrial switch
One CD ROM containing a user manual
RS-232/RJ-45 cable
2 panel mount plates with 6 screws
One DIN-Rail Clip (attached on the switch)
If any items are missing, contact B&B Electronics for a replacement.

4 Manual Documentation Number: EIR510-xSFP-T_0708m
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Hardware Description
Physical Dimension (W x D x H)
2.9 x 4.2 x 6.4 in (7.4 x 10.7 x 16.3 cm)
Front Panel
Front Panel of the industrial switch

ManualDocumentationNumber:EIR510-xSFP-T_0708m 5
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Bottom View
Bottom Panel of the industrial switch

6 Manual Documentation Number: EIR510-xSFP-T_0708m
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
LED Indicators
LED Status Meaning
PWR Green The switch is powered on
Off The switch is powered off
PWR1 Green Power source 1 is available.
Off Power source 1 is unavailable
PWR2 Green Power source 2 is available.
Off Power source 2 is unavailable
Fault Orange Power or port failure (See alarm
setting for operational details)
Off Normal Operation
R.M.
Green The switch is the master of an
X-Ring group
Off The switch is not the master of an
X-Ring group
LNK/ACT
Green Fiber port linked
Blinks Fiber port transmitting or receiving
Off No device attached
P1 through P8
Orange Full-duplex mode
Blinking
(Orange) Collision
Off Half duplex or no device attached.
Green Network device detected.
Blinking
(Green) Transmitting or receiving
Off No device attached

ManualDocumentationNumber:EIR510-xSFP-T_0708m 7
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Ports
RJ-45 ports
There are 8x 10/100Mbps auto-sensing ports with MDI/MDIX. The switch
can connect to another switch or workstation without changing between
straight through or crossover cabling.
RJ-45 Pin Assignments
Pin Number Assignment
1 Tx+
2 Tx-
3 Rx+
6 Rx-
Straight Through Cable Schematic
Cross Over Cable Schematic

8 Manual Documentation Number: EIR510-xSFP-T_0708m
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Fiber Port
There are two 100Base-FX ports. The fiber port is SC or ST type connectors
in multi mode (2Km) or single mode (30Km).
Connect the fiber ports as shown below (Transmit to distant end receive and
vice versa).
ATTENTION This is a Class 1 Laser/LED product. Do not stare into
the Laser/LED Beam.

ManualDocumentationNumber:EIR510-xSFP-T_0708m 9
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Cabling
Use Category 5 cabling for RJ-45 port connection. The cable between
the switch and the network device (switch, hub, workstation, etc.) must
be less than 328 feet (100 meters) long.
Single-mode fiber ports must use 9/125 um single-mode fiber cable.
The cable length can be up to 30 Kilometers.
Multi-mode fiber ports must use 50 or 62.5/125 um multi-mode fiber
cable. The cable length can be up to 2Kilometers.

10 Manual Documentation Number: EIR510-xSFP-T_0708m
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Wiring the Power Inputs
[NOTE] Use 12 to 24 AWG wire.
V- V+V- V+
1. Insert the positive and negative wires into the V+ and V-
contacts on the terminal block connector.
2. To tighten the wire-clamp screws.

Manual Documentation Number: EIR510-xSFP-T_0708m 11
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Wiring the Fault Alarm Contact
[NOTE] Use 12 to 24 AWG wire.
[NOTE] Relay contacts are normally open.
[NOTE] The Relay Alarm also requires software configuration. Refer to the
Web Based Management Fault Relay Alarm Section.
Insert the wires into the fault alarm contact
1A@24V

12 Manual Documentation Number: EIR510-xSFP-T_0708m
B&B Electronics Mfg Co Inc –707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone] – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone] – www.bb-europe.com
Mounting Installation
DIN-Rail Mounting
1. Use the screws to attach the DIN-Rail to the switch
Rear Panel of
the switch
DIN-Rail