Bang & Olufsen Beocom EX UC User manual

Beocom EX UC
User Guide
Betjeningsvejledning
Bedienungsanleitung
Guía del usuario
Mode d’emploi
Guida utente
ユーザーガイド
사용 설명서
Gebruikershandleiding
Guia do utilizador
Руководство пользователя
Användarhandbok
用户指南
使用者指南

DOWNLOAD THE BANG & OLUFSEN
APP
To set up your product, start by downloading the
Bang & Olufsen App here:
ENGLISH
The app gives you the full Bang & Olufsen experience
from setup to audio personalisation, product support
and new features right at your fingertips.
When you first start the Bang & Olufsen app, you are
asked to create a user account. Then tap the Add
Product icon to add your product to the app.
2

FIRST-TIME SETUP
When opening the charging case lid for the first time,
your Beocom EX will automatically enter Bluetooth
pairing mode, and the light indicator on the charging
case will flash blue.
To connect to your dongle when doing first-time
set up, simply take the included dongle and insert
it into the USB port. The dongle is pre-paired to the
earphones and they will connect automatically. After
this connection, they will remain connected after the
earphones are taken out of the case.
To pair with another device such as a mobile phone,
please follow the guide on page 9.
3

MUSIC
Use the touch interface on both earphones to control
your Beocom EX.
Left Right
Play/Pause Single press
Volume up Press and hold
Volume down Press and hold
Next Double press
Previous Double press
Active Noise
Cancellation,
Transparency,
Neutral
Single press
(cycle)
4

CALL
Use the touch interface on both earphones to control
your Beocom EX.
Left Right
Accept call Single press Single press
End call Double press Double press
Reject call Double press Double press
Volume up Press and hold
Volume down Press and hold
Own Voice,
Active Noise
Cancellation,
Neutral
Single press
Mute/Unmute* Single press
*With Beocom Link Dongle only
5

SINGLE EARPHONE
Use the touch interface on the earphone you are
wearing to access the following controls:
Left Right
Play/Pause Single press Single press
Accept call Single press Single press
End call Double press Double press
Next Double press
Previous Double press
Reject call Double press Double press
6

CHARGE WITH PAD
The Qi-certified case can be charged wirelessly on a
charging pad.
Simply place the case on top of a charging pad
connected to power.
The indicator on the case will flash amber during
charging and become solid green once fully charged.
To charge your earphones, place them in the
charging case.
7

CHARGE WITH USB-C
Connect the included USB-A to USB-C cable to
your charging case and to a charging adapter, and
connect the charging adapter to a power supply.
Note: A charging adapter of a maximum of 5V / 3A
can be used to charge your Beocom EX
The indicator on the case will flash amber during
charging and become solid green once fully charged.
To charge your earphones, place them in the
charging case.
8

BLUETOOTH PAIRING
Place both earphones in the charging case, and make
sure that the case lid is fully open. Once the LED has
turned off, press and hold the touch field on both
the left and right earphone for 6 seconds to trigger
Bluetooth pairing mode. The blue indicator will
flash when pairing is initiated, allowing you to find
Beocom EX on your device.
Close and open the lid again if pairing mode is not
triggered the first time.
9

ACTIVE NOISE CANCELLATION
Active Noise Cancellation (ANC) lets you tune out
your surroundings and focus on your music, podcast
or movie — or simply enjoy silence.
Switch on ANC by pressing the left earphone. Tap
again to cycle through ANC, Transparency and
Neutral modes.
You can also control ANC on the product page in the
Bang & Olufsen App, where you have the option of
automatically adjusting the ANC level according to
your environment.
10

TRANSPARENCY MODE
Transparency Mode lets you hear the world around
you, without taking out your Beocom EX.
Choose how much of the outside world you’d like to
let in by tapping on the left earphone and cycling
through Active Noise Cancellation, Transparency and
Neutral modes.
You can also control Transparency Mode on the
product page in the Bang & Olufsen App.
11

OWN VOICE
Own Voice technology captures and adjusts the
volume of your voice, while also filtering out
background noises, to give you a clear and true
representation of how you sound.
You can turn Own Voice on and off, or adjust the
levels, by tapping the left earphone while on a call.
You can also control it on the product page in the
Bang & Olufsen App.
12

EARTIPS
Selecting the right ear tips for your Beocom EX is
very important for the best sound experience, which
is achieved when inserting the Beocom EX into your
ear canals. Try out the different sizes included with
your earphones to get the best isolation. The correct
size will give you complete isolation.
Eartips from Comply Foam™ improve isolation and
therefore the sound experience. Silicone ear tips are
particularly good for sports.
13

CHARGING CASE LIGHT INDICATOR
The light indicator on the front edge of the charging
case shows the battery status of the case and the
earphones, if they are stored inside.
Light Meaning
Solid red (5 seconds) Case battery low
Solid amber (5 seconds) Case battery medium
Solid green (5 seconds) Case battery high
Amber pulsing Case charging
Solid green Case battery full
14

FACTORY RESET
To restore Beocom EX to factory settings, place both
earphones in the charging case and close the case
lid.
Fully open the charging case lid.
Press and hold on the touch field on both the left and
right earphone.
After 6 seconds, Bluetooth pairing mode will be
triggered (light indicator flashing blue). Keep holding
on the touch fields.
Factory reset will complete after 20 seconds (light
indicator flashing red)
Note: Once the light indicator on the charging case
has flashed red 5 times, it will turn off, and the
factory reset has completed.
15

DOWNLOAD BANG & OLUFSEN-
APPEN
For at konfigurere dit produkt skal du starte med at
downloade Bang & Olufsen-appen her:
Appen giver dig den fulde oplevelse fra Bang
& Olufsen fra konfigurering til lydtilpasning,
produktsupport og nye funktioner med få tastetryk.
Første gang du åbner Bang & Olufsen-appen, bliver
du bedt om at oprette en brugerkonto. Tryk på ikonet
Tilføj produkt for at føje dit produkt til appen.
DANSK DANISH
16