Bang & Olufsen Beoplay EQ User manual

Beoplay EQ
User Guide
Betjeningsvejledning
Bedienungsanleitung
Guía del usuario
Mode d’emploi
Guida utente
ユーザーガイド
사용 설명서
Gebruikershandleiding
Guia do utilizador
Руководство пользователя
Användarhandbok
用户指南
使用者指南

DOWNLOAD BANG & OLUFSEN APP
To set up your product, download the Bang & Olufsen
App from the Google Play Store or Apple App Store.
From this app you can set up your product and get
the full Bang & Olufsen experience. Unlock the full
product experience of audio personalisation, product
support and new features at your fingertips.
When you first start the Bang & Olufsen App, you will
be asked to create a user account.
To set up your earphones, click to add a new
product. If you already have an account this can be
found under settings.
ENGLISH
3

FIRST TIME SET UP
To turn on your new Beoplay EQ place the earbuds
inside the charging case and wait for 2 seconds.
Remove the earbuds and they will automatically go
into Bluetooth pairing mode and the light indicators
on the back will flash blue.
Next, go to the Bang & Olufsen App to set up your
product, connect to Bluetooth and personalise your
earphones.
Once Beoplay EQ is turned on, you will be able to
find them in the Bluetooth settings of your device.
4

MUSIC
Use the touch interface on both earbuds to control
your Beoplay EQ.
Action Gesture
Play/Pause Right: Double press
Volume up Right: Double press and
hold (+)
Volume down Left: Double press and
hold (-)
Next Right: Triple press
Previous Left: Triple press
Active Noise
Cancellation,
Transparency, Neutral
Left: Double press
(cycle)
5

CALL
Use the touch interface on both earbuds to control
your Beoplay EQ.
Action Gesture
Accept call Right: Double press
End call Right: Double press
Active Noise
Cancellation, Own voice,
Neutral
Left: Double press
(cycle)
6

SINGLE EARBUD
Use the touch interface on the earbud you are
wearing to access the following controls.
Action Gesture
Play/Pause Double press
Accept call Double press
End call Double press
7

CHARGE WITH PAD
The Qi-certified case with can be wirelessly charged
on a charging pad.
Simply place the case on top of a charging pad
connected to power.
The indicator on the case will flash amber during
charging and become solid green once fully charged.
To charge your earphones, place them in the
charging case.
8

CHARGE WITH USB-C
Charge the case with the included USB-C adaptor,
by connecting to the case and a charging adaptor or
suitable device.
The indicator on the case will flash amber during
charging and become solid green once fully charged.
To charge your earphones, place them in the
charging case.
Enjoy up to six hours of playtime with ANC on a
single charge, with a further 12 hours stored in the
charging case.
For a quick boost, 15 minutes charging in the case
will provide two full hours of music.
9

BLUETOOTH PAIRING
Place both earbuds in the case then Press and hold
both aluminium touch panels for 6-8 seconds.
The blue indicator will flash when pairing is initiated,
allowing you to find Beoplay EQ on your device.
10

ACTIVE NOISE CANCELLATION
Noise Cancellation lets you tune out your
surroundings and focus on your music, podcast or
movie — or simply enjoy silence.
Switch on Active Noise Cancellation by double
pressing the left earbud. Tap again to cycle through
Active Noise Cancellation, Transparency and Neutral
modes.
You can also control ANC on the product page in the
Bang & Olufsen App, where you have the option of
automatically adjusting the ANC level according to
your environment.
11