Bang & Olufsen Beo4 User manual

Beo4
Guide

Using your Beo4 remote control, 3
Beo4 buttons in detail, 4
 • DailyandadvancedoperationwithBeo4
buttons
Customise Beo4, 5
 • Addanextra‘button’
 • Moveextra‘buttons’
 • Removeanextra‘button’
 • SetupBeo4
 • Beo4zones(ZONE?)
 • Beo4options(OPTION?)
 • Beo4conguration(VIDEO?)
 • Beo4modes(MODE?)
 • ResetyourBeo4(RESET?)
Conversion, 12
Maintenance, 13
 • CleaningBeo4
 • Changingthebatteries
Lexicon, 14
Contents
Technicalspecications,featuresandtheuse
thereofaresubjecttochangewithoutnotice.
0912

Using your Beo4 remote control
DailyoperationsarecarriedoutbypressingasinglebuttononBeo4,orby
pressingafewbuttonsinalogicalandstraightforwardsequence.
ButtheBeo4remotecontrolincorporatesmorefunctionsthanjusttheactual
buttons.Extrasourcescanbeswitchedon,andadditionalfunctionscanbe
obtainedviathedisplay.“Buttons”forthesefunctionscanbebroughtupon
theBeo4displayviatheLISTbutton.Refertothechapter‘CustomiseBeo4’.
4 5 6
LIST 0 MENU
1 2 3
STOP
BACK
3

Beo4 buttons in detail …
TV LIGHT RADIO
DTV DVD CD
V MEM TEXT A MEM
7 8 9
4 5 6
LIST 0 MENU
1 2 3
STOP PLAY
BACK
4
Move your mouse
around this illustration
for information about
the Beo4 buttons.

TheBeo4buttonsgivedirectremotecontrolofalargenumberoffunctions,
andtheBeo4
displaygivesyouaccesstoevenmorefunctions.
WheneverasourceisdisplayedonBeo4(TV,RADIO,etc.),youcanpressthe
LISTbuttonandbringupextrafunctionsinthedisplaytohelpyouoperate
thatsource,justasifyouwerebringingupextrabuttons.Youcanalsoswitch
onextraequipmentconnectedtoyourtelevision.
YoucancustomiseaBeo4tosuityourproduct,andchangetheorderin
whichtheseextrafunctionsappearwhenyoubringthemup.
NotethatBeo4containsalistofallofBang&Olufsen’sextraaudioandvideo
functions,butonlyfunctionssupportedbyyourproductworkwhenyoubring
themupintheBeo4display.
Customise Beo4 …
5

Add an extra ‘button’
When you add a new function to the Beo4 list, you can bring up this
new ‘button’ in the Beo4 display.
>Pressandholdthestandbybuttondown.
>PressLISTtogetaccesstotheBeo4setupfunction.
>Letgoofbothbuttons.ADD?appearsinthedisplay.
>Pressthecentrebuttonanduse toselectAV?,LIGHT?orCNTROL?
>Pressthecentrebuttontobringupthelistofextra‘buttons’toaddfrom.
Therst‘button’appearsinthedisplay,itashesonandoff.
>Press or tomoveforwardsorbackwardsinthelistofextra‘buttons’.
>Pressthecentrebuttontoaddandplacethe‘button’onitspresetposition
inthelist,or…
>…press1 – 9toinsertthe‘button’ataspecicpositioninthelist.
>ADDEDappears,indicatingthatthe‘button’hasbeenadded.Longpresson
BACKwillleavethesetup.
>> Customise Beo4 …
3
6
Add an extra ‘button’
to Beo4, either to the
preset position or to a
specic position.

Move extra ‘buttons’
You can rearrange the order in which the extra ‘buttons’ appear when
you press LIST.
>Pressandholdthestandbybuttondown.
>PressLISTtogetaccesstotheBeo4setupfunction.
>Letgoofbothbuttons.ADD?appearsinthedisplay.
>PressLIST or todisplayMOVE?onBeo4.
>Pressthecentrebuttonanduse toselectAV?,LIGHT?orCNTROL?
>Pressthecentrebutton tobringupthelistofextra‘buttons’.Therst
‘button’appearsinthedisplay.
>Press or tomoveforwardsorbackwardsinthelistofextra’buttons’.
>Pressthecentrebutton tomoveandplacethedisplayed‘button’asthe
rstinthelist,or…
>…press1 – 9 tomovethe‘button’toaspecicpositioninthelist.
>MOVEDappears,indicatingthatthe‘button’hasbeenmoved.Longpress
onBACKwillleavethesetup.
>> Customise Beo4 …
3
7
Move extra ‘buttons’,
either to the top of the
list or to a specic
position.

Remove an extra ‘button’
You can remove any of the extra ‘buttons’ that are available when you
press LIST.
>Pressandholdthestandbybuttondown.
>PressLISTtogetaccesstotheBeo4setupfunction.
>Letgoofbothbuttons.ADD?appearsinthedisplay.
>PressLIST or todisplayREMOVE?onBeo4.
>Pressthecentrebuttonanduse toselectAV?,LIGHT?orCNTROL?
>Pressthecentrebuttontobringupthelistofextra‘buttons’.Therst
‘button’appearsinthedisplay.
>Press or tomoveforwardsorbackwardsinthelistofextra’buttons’.
>Pressthecentrebutton toremovethe‘button’showninthedisplay.
>REMOVEDappears,indicatingthatthe‘button’hasbeenremoved.Long
pressonBACKwillleavethesetup.
>> Customise Beo4 …
8

>> Customise Beo4 …
Set up Beo4
If you buy a new Beo4 you can set it up for your television.
>Pressandholdthestandbybuttondown.
>PressLISTtogetaccesstotheBeo4setupfunction.
>Letgoofbothbuttons.ADD?appearsinthedisplay.
>PressLIST or todisplayZONE?,CONFIG?orMODE?onBeo4.
>Pressthecentrebuttontoselectthesetupyouwant.
>Press or todisplaythesettingyouwantonBeo4.
>Pressthecentrebutton tostoretheconguration.
>STOREDappears,indicatingthatthecongurationhasbeenstored.
LongpressonBACKwillleavethesetup.
Beo4 zones (ZONE?)
ALLUsedifyouhaveoneBeo4ineachroomforallyourproducts(default
setting).
VIDEOUsedifyouhavemorethanoneBeo4inaroomandyouwanttouse
ittoactivatebothvideoandaudiosourcesviayourvideoproduct.
AUDIOUsedifyouhavemorethanoneBeo4inaroomandyouwanttouse
ittoactivatebothaudioandvideosourcesviayouraudioproduct.
LINK Usedifyouhave,forexample,morethanonetelevisioninthesame
room(Option4).RefertotheGuideenclosedwithyourproduct.
9

Beo4 options (OPTION?)
AppearswhenyouaccesstheBeo4setupmode.Enablesyoutopreprograma
Bang&Olufsensystemsetup.
V.OPTVideooptions
A.OPTAudiooptions
L.OPTLinkoptions
Forfurtherinformation,refertotheGuideenclosedwithyourproduct.
Beo4 conguration (VIDEO?)
ForselectingadedicatedvideoproductsetupforBeo4.
VIDEO 5Supports,forexample,videoproductsfortheAmericanand
Europeanmarkets.
VIDEO 6Supports,forexample,BeoVisionAvantandearlierBeoVisionMX
models.
Forfurtherinformation,contactyourlocalBang&Olufsenretailer.
>> Customise Beo4 …
10

>> Customise Beo4 …
Beo4 modes (MODE?)
MODE 1 When a Beo4 remote control is in MODE 1, the navigation button is
used for menu operation, and menu and source operation are separated.
MODE 1 should be used if:
–allyourtelevisionsinyourvideosetupcontainthe’BEO4SETTING’menu
anditissetto‘NAVIGATIONBUTTON’.
MODE 2 When a Beo4 remote control is in MODE 2, the navigation button
does not work and menu and source operation are not separated. MODE 2
should be used if:
–oneofyourtelevisionsinyourvideosetupdoesnotcontainthe’BEO4
SETTING’menu,or…
–…youalsouseaBeo4remotecontrolwithoutnavigationbuttoninyour
videosetup.
Setthe’BEO4SETTING’menuto‘NONAVIGATIONBUTTON’,wherepossible.
Reset your Beo4 (RESET?)
ForresettingyourBeo4todefault,allsettingswillbedeleted.SelectRESET?
fromtheLISTmenu.
11

Conversion …
Beo4
- type 1710
Beo4
- type 1621/22/24/25
New functions on
Beo4 (type 1710)
RECORDisintheLIST
menuandisusedto
makearecording.
PLAY startsplaybackof
aDVD,recordingetc.
BACK isusedtostep
backinmenusand
closestheLISTmenu.
STOP isusedtostop
playbackofasource,
forexampleaDVD.
Navigation and
centre buttons
(previousGO)are
usedformenu
operation.
Arrow buttonsare
usedforsource
operation.
TV LIGHT RADIO
DTV DVD CD
V MEM TEXT A MEM
7 8 9
4 5 6
LIST 0 MENU
1 2 3
STOP PLAY
BACK
TV LIGHT RADIO
DTV DVD CD
V MEM RECORD A MEM
7 8 9
4 5 6
TEXT 0 MENU
1 2 3
LIST EXIT
STOP
GO
12

Cleaning the Beo4 …
Wipe the Beo4 remote control with a soft, lint-free, wet cloth which is
wrung rmly.
Changing the batteries
When BATTERY appears in the Beo4 display, it is time to change the
batteries in the remote control.
The Beo4 requires three batteries (placed under the lid on the back).
We recommend that you use 1.5 volt (size AAA) Alkaline batteries only.
Replace the batteries as shown in the illustration.
When you have replaced the batteries, you must wait for about 10
seconds until the display reads TV. The Beo4 remote control is then
ready to operate again.
Note: We recommend that you keep a nger on top of the batteries until the
lid is in place.
Maintenance …
1
2
3
1
2
13
CAUTION! Do not
expose batteries to
excessive heat such as
sunshine, re or the
like!

Lexicon …
A
A.AUX (audio auxiliary source)Forswitchingonanyextraequipment
connectedtoyourBang&Olufsenaudiosystem.
ADD? AppearsasanoptionintheBeo4setupmode.Enablesyoutoadd
extra“buttons”totheBeo4display.Referto‘Addanextra‘button’’.
A-DTV2ForselectingAVandthenDTV2.
A-DVD2 (AV video recorder 2) ForselectingAVandthenDVD2.
A.MEM (audio recorder)AppearsinthedisplaywhenyoupresstheBeo4
AMEMbutton.AnyoperationyoucarryoutonBeo4willbedirectedto
yourBang&Olufsenaudiorecorder.
A.MEM2ForswitchingonasecondaudiorecorderconnectedtoyourBang&
Olufsenaudiosystem.
A-N.MUS (AV Net music) ForselectingAVandthenN.MUSIC.
A-N.RA (AV Net radio)ForselectingAVandthenN.RADIO.
A.OPT (audio option)Forprogrammingasystemsetupforaudiosystems.
A-PC (AV PC)ForselectingAVandthenPC.
A.SETUP (audio setup)Givesaccesstoalistofextra“buttons”requiredfor
soundadjustmentofcertainBang&Olufsenaudiosystems.A.SETUPmust
beaddedinordertobeabletorevealthefollowing»buttons«forsound
adjustment:
BASS –givesaccesstoadjustingBasslevelsforanaudiosystem,referto
BASSforfurtherinformation.
TREBLE –givesaccesstoadjustingTreblelevelsforanaudiosystem,refer
toTREBLEforfurtherinformation.
LOUDNSS (loudness) –givesaccesstosettingLoudnesstoOnorOff,refer
toLOUDNSSforfurtherinformation.
AVIndicatesthattheaudio/videofunctionisactivated,transferring,for
example,TVsoundtothespeakersconnectedtoanaudiosystemorvice
versa.ThisonlyappliesifyourVideoandAudiosystemsareinterconnected.
AV?ForconguringAVsettings.RefertoAV.
A-V.AUX (AV V.AUX)ForselectingAVandthenV.AUX.
B
BASS ForsoundadjustmentofbasslevelsincertainBang&Olufsensystems.
InordertogetaccesstoBASSyoumustaddeitherA.SETUPorV.SETUPas
appropriate.
BATTERYIndicatesthatitistimetochangethebatteriesintheBeo4remote
control.
BOOK Forfutureuse.
C
CAMERA (Camcorder)ForselectionofCamCorderinputonBang&Olufsen
videosystems.
CD (compact disc player)AppearsinthedisplaywhenyoupresstheBeo4CD
button.AnyoperationyoucarryoutontheBeo4willbedirectedtoyour
Bang&OlufsenCDplayer.
14

CLEARForclearingprogramnumbersonrecentBang&OlufsenTVsets.
InordertogetaccesstoCLEAR,V.SETUPmustbeaddedrst.
CLOCKDisplaysthetimeoncertainBang&Olufsenproducts.Refertothe
relevantUserGuideforfurtherinformation.
CNTROL?Forconguringcontrolofwindows,curtainsetc.Referto
CONTROL.
CONFIG? EnablesyoutoprogramadedicatedproductsetupforBeo4.
CONTROL Usedtocontrolnon–Bang&Olufsenproducts,e.g.windows,
curtainsetc.
COUNTER (counter position)Allowsyoutondaspeciccounterposition
onavideotape.PressLISTrepeatedlytobringupCOUNTER intheBeo4
display andthenentertheappropriatecounterpositionusingthenumber
buttons.
D
DTV (Digital TV) AppearsinthedisplaywhenyoupresstheBeo4DTV
button.AnyoperationyoucarryoutonBeo4willoperateyourBang&
OlufsendigitalTVsource.
DTV2ForswitchingonanyextravideoequipmentconnectedtoyourBang&
Olufsenvideosystem.Pressthecentrebutton.
DVD (digital versatile disc and Blu-ray) Appearsinthedisplaywhenyou
presstheBeo4DVDbutton.AnyoperationyoucarryoutonBeo4willbe
directedtoyourDVDplayer.
DVD2 (a second DVD player or video recorder)Forswitchingonasecond
videorecorderconnectedtoyourBang&Olufsenvideosystem.
E
EDIT UsedforplaybackofapreprogrammedsequenceofCDtrackson
BeoSound9000.
F
FORMAT (picture format)ForoptimisingthepictureformatonaBang&
Olufsenvideosystem.RefertotherelevantUserGuideforfurther
information.
G
GAME Usedwhenplayinggamesusingthetelevisionasmonitor.GAME
minimisesthedelaycausedbysignalprocessing.
I
INDEX (Teletext index page) BringsuptheTeletextindexpage(p.100).Add
INDEX totheBeo4listoffunctions.AccessTeletextbypressingTEXTand
pressLISTrepeatedlytobringupINDEX intheBeo4displayandpressthe
centrebuttontobringupthepage.
>> Lexicon …
15

J
JOIN IsaMasterLinkfunction.PressLISTrepeatedlytobringupJOINinthe
Beo4display.Youareconnectedtotheactivesourceinthesystem.In
standbymoderadiowillbeusedassource.
L
LAMP (lamp light control)Forswitchingonaparticularlampinyourlight
setup–requirestheinstallationofaBang&Olufsenlightcontrolunit.Press
LISTrepeatedlytobringupLAMPintheBeo4display,addthe“button”ifit
isnotalreadyavailable,thenentertheappropriatenumberforalamp(1–9).
LARGE (Teletext: Large)UsedoncertainBang&OlufsenTVsforenlarging
theTeletextpageyouarewatching.AccessTeletext,thenpressLISTrepeat
edlytobringupLARGE intheBeo4displayandpressthecentrebuttonto
enlargepartofthepage.Pressthecentrebuttontoenlargethesecondhalf
ofthepageandpressthecentrebuttontoreturntonormalTeletextpagesize.
L-DTV2 ForselectingLINKandthenDTV2.
L-DVD2 (link second DVD player or video recorder) Forselecting LINK
andthenDVD2.
LIGHT (light control)AppearsinthedisplaywhenyoupresstheBeo4LIGHT
button.AnyoperationyoucarryoutonBeo4willbedirectedtowardsyour
Bang&Olufsenlightcontrol(s).
LIGHT? Forconguringlightsettings.RefertoLIGHT.
LINKMustbeusedwheretheuseofaLINKbuttonisnormallyspecied.
LINK mustbeaddedtoyourBeo4toachievethefollowing:
1.Ifitisdesiredthatadecoderinthemainroomcanbeaccessedfroma
videolinkroom.
2.Ifthesamesourceisavailableinbothlinkandmainroom,e.g.ifaccessis
desiredinthelinkroomtoavideorecorderinthemainroominsteadofthe
videorecorderpresentinthelinkroom.
3.Ifalinkroomproduct,e.g.BeoLab3500orasecondtelevision,isplaced
inthesameroomasamainroomproductinOption4.
LINK-AV (link audio/video)Usedtoobtainstereosoundfromyourmain
Bang&Olufsenvideosysteminalinkroomwithasecondaryvideosource,
usuallyTV.ThefunctionisusefulwhenaTVdecoderisconnectedtothe
mainvideosystem.AddittotheBeo4listoffunctions,pressLISTtoreveal
LINK-AVandthenpressTVtodoso.
L-N.MUS ForselectingN.MUSICinalinkroom.
L-N.RA ForselectingN.RADIOinalinkroom.
L.OPT (link option) Forprogrammingasystemsetupforlinkroomproducts.
UseL.OPTforprogrammingalinkoption.
>> Lexicon …
16

LOUDNSS (loudness)Forswitchingtheloudnessfunctionon/offincertain
Bang&Olufsensystems.LOUDNSSisonlyavailableifA.SETUPorV.SETUP
hasbeenadded.Theloudnessfunctioncompensatesforthehumanear’s
lackofsensitivitytohighandlowbassandtreblelevelswhenlisteningto
lowvolumelevels.PressLISTrepeatedlytobringupLOUDNSSintheBeo4
displayandthenpressthecentrebuttonrepeatedlytosetloudnesstoonoroff.
Ifyouwishtostoreyouradjustment,refertoS.STORE(SoundStore)for
furtherinformation.
L-PC (Link PC)ForselectingLINK andthenPC.
L-V.AUX (Link V.AUX)Usedinsomesituationstodistributethesettopbox
signaltothelinkroom.
M
MIX (Teletext: Mix)UsedoncertainBang&Olufsen TVstosuperimposethe
T e l e t e x t  pageontheTVpicture.AccessTeletext,press LISTrepeatedlytobring
upMIX intheBeo4displayandthenpressthecentrebutton.
MODE? ForsettingtheBeo4tothecorrectmodedependingonthesetup.
Referto‘Beo4modes(MODE?)’.
MOTS (More Of The Same) UsedtoactivateMOTSonanaudioproduct.
MOVE?AppearsasanoptionintheBeo4setupmode,Enablesyouto
rearrangetheorderinwhichtheextra“buttons”intheBeo4display
appear.Referto‘Moveextra‘buttons’’.
N
N.MUSIC (Net music)Forplayingmusictracksinmp3andwmaformat.Any
operationyoucarryoutonBeo4willbedirectedtoyourN.MUSICplayer,
e.g.BeoSound5.
N.RADIO (Net radio)ForaccesstoInternetradio.Anyoperationyoucarry
outonBeo4willbedirectedtoyourN.RADIOplayer,e.g.BeoSound5.
O
OPTION? (Option programming)
V.OPT (video option)
A.OPT (audio option)
L.OPT (link option)
P
PAGE (Teletext page selection)ForselectingTeletextpagesoncertain
Bang&OlufsenTVs(wherepressingGOTOisnormallyrequiredforaccess
orpageselection).
PCForswitchingonanyextravideoequipmentconnectedtoyourBang&
Olufsenvideosystem.Pressthecentrebutton.
P-DTV2ForshowingDTV2inthepicturetotheright.RefertoPANDP.
P-DVD2 (picture-and-picture video recorder 2) ForshowingDVD2inthe
picturetotheright.
>> Lexicon …
17

P-AND-P (picture-and-picture)Foroperatingthepictureandpicture
functiononcertainBang&OlufsenTVs.Press,forexample,theTVbutton
tobringupthesourceTVinthepicturetotheright.
PICTUREForoperatingthevariousfunctionsrelatedtothePICTUREbutton
onotherrecentBang&Olufsenremotecontrols.Inoldervideosystems,
itmayrelatetofunctionssuchasmotorisedstand,pictureandpicture,
aswellaspictureadjustment.V.SETUPmustbeaddedtobeabletoaccess
PICTURE.
PLAYstartplaybackofaDVD,recordingetc.
P.MUTE (picture mute) Switchesthepictureonoroff.PressLISTand or
toselectP.MUTEandpressthecentrebuttontochangethesetting.Only
availableonsometelevisions.
P-PC (picture-and-picture PC)ForshowingPCinthepicturetotheright.
P-V.AUX (picture-and-picture V.AUX)Forshowingthesourceconnected
totheV.AUXsocketinthepicturetotheright.
R
RADIOAppearsinthedisplaywhenyoupresstheBeo4RADIObutton.Any
operationyoucarryoutonBeo4willbedirectedtoyourBang&Olufsen
radio.
RANDOM (random play)Forswitchingontherandomorderplayback
functioninrecentBang&
OlufsenCDplayers.WithRANDOMinthedisplay,
pressthecentrebutton.
RECORD StartsarecordingonaBang&Olufsenaudioorvideorecorder.
AvailableintheLISTmenu.
RECORD2 (recording A.MEM2 or DVD2)Shouldbeaddedwhenyou
connectasecondvideorecordertoyourvideosystem.Startsarecordingon
asecondBang&Olufsenaudioorvideorecorder.Pressthecentrebutton
twicetostartrecording.
REMOVE?AppearswhenyouhaveaccessedtheBeo4setupmode.Enablesyou
toremoveextra“buttons”fromtheBeo4display.Referto‘Removeanextra
‘button’’.
REPEAT (repeated play)Forswitchingontherepeatedplaybackfunctionin
someBang&OlufsenCDplayers,forexampleBeoSound9000.With
REPEATinthedisplay,pressthecentrebutton.
RESET Forresettingpictureorsoundadjustmentstotheirpresetlevels.Press
thecentrebutton.AvailableintheLISTmenu.
RESET?Forresettingtheproducttodefault.Referto‘ResetyourBeo4
(RESET?)’.
RETURN (record return)Foroperatingtherecordreturnfunctionincertain
Bang&Olufsentaperecorders.Toreturntowherearecordingstarted,
pressthecentrebutton.
REVEAL (Teletext reveal)ForrevealingconcealedTeletextinformationin
Bang&OlufsenTVs.
>> Lexicon …
18

S
SELECTIsusedforprogrammingasequenceofcompactdiscsforplaybackon
BeoSound9000.
SETUPForsettinguptheLC2LightControl.
SHIFTForoperatingcertainfunctionsrelatedtosettopboxoperationinalink
room.CertainotherfunctionsmayalsorequirethatSHIFTisdisplayedrst.
SLEEPForsettingasleeptimeronthetelevisionusingBeo4.PressLIST
repeatedlytobringupSLEEPintheBeo4displayandpressthecentre
buttonrepeatedlytosetdifferentsleeptimers.
SOUND (mono/stereo sound/language)Forswitchingbetweenthetypes
ofsound(mono/stereo/language)currentlyavailableonaRadio,TV,or
digitalTVprogramme.Pressthecentrebuttonrepeatedly.
SP.DEMO (speaker demo)Formakingaspeakerdemonstrationonthesystem
inquestion.Pressthecentrebutton.
SPEAKER (loudspeakers) Forselectingthenumberofloudspeakersyou
want–inaBang&Olufsensurroundsoundsetup.Press1–5.
S.STORE (sound store)Forstoringsoundadjustmentsettings.S.STOREis
onlyavailableifV.SETUPorA.SETUPhasbeenadded.
STANDForturningcertainBang&Olufsenvideosystemsontheirmotorised
stands.
STOREForstoringTVprograms/pictureadjustmentsettings(Referto
V.SETUP)andfavouriteTeletextpages(memorypages).ForstoringBang&
Olufsenlightsetups(RefertoLIGHT).Pressthecentrebutton,enterthe
appropriatenumber,andthenpressthecentrebuttonagain.
SUBCODE (Teletext subcode)ForoperatingtheTeletextsubpagefunctionin
certainBang&OlufsenTVs.
T
TEXT (Teletext) AppearsinthedisplaywhenyoupresstheBeo4TEXT
button.AnyoperationyoucarryoutonBeo4willoperatetheTeletext
function(ifTeletextisavailable)ontheTVprogramyouarecurrently
watching.
TRACKForselectingindividualCDtracksonBeoSound9000.
TRACKNG (tracking)Forinstanttrackingadjustmentofthevideotapeyou
arewatching.
TREBLEForsoundadjustmentoftrebletoneincertainBang&Olufsen
systems.TREBLEisonlyavailableifA.SETUPorV.SETUPhasbeenadded.If
youwishtostoreyouradjustment,refertoS.STORE(SoundStore)for
furtherinformation.
TUNE (tuning in a station)FortuninginstationsoncertainBang&Olufsen
TVs.TUNEisonlyavailableifV.SETUPhasbeenadded.
TURN ForturningthetapeincertainBang&Olufsenaudiotaperecorders–
toplaytheotherside.OncertainBang&Olufsenvideotaperecorders
TURN isalsousedforinputselectionofCamcorderinrecordpausemode.
Pressthecentrebutton.
>> Lexicon …
19

TV AppearsinthedisplaywhenyoupresstheBeo4TVbutton.Anyoperation
youcarryoutontheBeo4willbedirectedtoyourBang&OlufsenTV.
U
UPDATE (Teletext update) ForoperatingtheTeletextupdatefunctionin
Bang&OlufsenTVs.Pressthecentrebutton.Repeattheoperationtoseethe
pagewhenithasbeenupdated.
V
V.AUX (auxiliary video source) Forswitchingonanyextravideoequipment
connectedtoyourBang&Olufsenvideosystem.Pressthecentrebutton.
V.AUX2 (second auxiliary video source) Forswitchingonextravideo
equipmentconnectedtoyourBang&Olufsenvideosystem.
VIDEO?ForselectingadedicatedvideoproductsetupforBeo4.Referto
‘Beo4conguration(VIDEO?)’.
VIDEO5
VIDEO6
V.MEM (video recorder)AppearsinthedisplaywhenyoupresstheBeo4
VMEMbutton.AnyoperationyoucarryoutonBeo4willbedirectedtoyour
Bang&Olufsenvideorecorder.
V.OPT (video option)Forprogrammingasystemsetupforvideoproducts.
V.SETUP (video setup) Givesaccesstoalistofextra“buttons”thatare
requiredforthesettingupofcertainBang&Olufsenvideoproducts.
STORE Forstoringanadjustmentorapresetvalue,refertoSTOREfor
furtherinformation.
BASS Soundadjustmentofbasstone,refertoBASSforfurtherinformation.
TREBLE Soundadjustmentoftrebletone,refertoTREBLEforfurtherinfor
mation.
LOUDNSS (loudness)Soundadjustment–switchingtheloudnessfunction
onoroff,refertoLOUDNSSforfurtherinformation.
Z
ZONE SetyourBeo4toazone,i.e.decidewhichproductshouldactivate
videoandaudiosources.Referto‘Beo4zones’.
ALL OneBeo4ineachroom.
VIDEO MorethanoneBeo4inaroom.
AUDIO MorethanoneBeo4inaroom.
LINK ForproductssettoOption4.
>> Lexicon …
20