Banner Magnetic Vehicle Sensor M-GAGE User manual
Magnetic Vehicle
Sensors
• Self-contained sensor without
need for external electronics or
controller
• Compact & robust design with
various mounting configurations
• Available as cylindrical housing
or as “flatpack”, IP69K sealed
• Patented 3-axis magneto-
resistive based technology:
sensor uses the earth's
magnetic field to sense large
ferro-magnetic objects such
as motorcycles, cars,
trucks, …
• Suitable for above- or
below-ground installations
• Simple “click-&-teach” to
store ambient background
conditions, and to ignore the
permanent presence of ferrous
objects
• Technical Data:
– Power supply 10 to 30 Vdc
– PNP and NPN switching
outputs
– Wide temperature
range: -40 ºC to +70 ºC
A023 03/04
M-GAGE™
Magnetic sensing technology
eliminates inductive loops!
A023 03/04
Banner Engineering offers the industry a highly
complete and integrated line of photoelectric
and ultrasonic sensors, machine safety
products, measurement and inspection
products and vision sensors. Banner
Engineering is a US based company with
subsidiaries around the world for global
sales and support.
Banner Engineering Europe
Koning Albert 1 laan, 50
1780 Wemmel • Belgium
Phone: +32 2 456 07 80
Fax: +32 2 456 07 89
Info: [email protected]
Web: www.bannerengineering.com
▲Overhead Door
Detect approaching/departing vehicles such as
forklifts at high speed opening doors. Invisible
mounting under the floor.
▲Loading Dock
Signal arrival of trucks at loading docks, trigger
automated dock levelling systems. Close doors
for security after truck leaves.
▲Car Wash Entry/Exit
Detect if vehicles are present in the wash
tunnel, collision avoidance, trigger special
wash units, open/close doors.
▲Drive-In
Alert personnel that vehicle is present at order
point or collection counter. Multiple M-GAGEs
can be used for drive-in timing systems.
Flat Pack Housing Style
S18M Housing Style
This manual suits for next models
1
