Barco MDSC-8358 Series User manual

ENABLING BRIGHT OUTCOMES
MDSC-8358 RL
MDSC-8358 RLG
User Guide
MDSC-8358

Registered office: Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com
Barco NV
Beneluxpark 21, 8500 Kortrijk, Belgium
www.barco.com/en/support
www.barco.com

1 Welcome!.......................................................................................................................................................................................................... 5
1.1 About the product...............................................................................................................................................................................6
1.2 What's in the box................................................................................................................................................................................6
1.3 About this user guide .......................................................................................................................................................................6
2 Parts, controls and connectors....................................................................................................................................................9
2.1 Front view............................................................................................................................................................................................10
2.2 Rear view............................................................................................................................................................................................. 11
2.3 Connector view ................................................................................................................................................................................ 11
2.4 Connector pin assignments ......................................................................................................................................................12
2.4.1 DVI–D single link / dual link connector ............................................................................................................12
2.4.2 RS232 connector ........................................................................................................................................................13
3 Display installation................................................................................................................................................................................15
3.1 Hoist bracket installation.............................................................................................................................................................16
3.2 VESA mount installation .............................................................................................................................................................18
3.3 Video input connection.................................................................................................................................................................19
3.4 Video output connection .............................................................................................................................................................20
3.5 Power supply connection ...........................................................................................................................................................20
4 Daily operation .........................................................................................................................................................................................21
4.1 On/Off switching ..............................................................................................................................................................................22
4.2 Power led status ..............................................................................................................................................................................22
4.3 Brightness adjustment .................................................................................................................................................................22
4.4 OSD menu activation....................................................................................................................................................................23
4.5 OSD menu navigation ..................................................................................................................................................................23
4.6 OSD menu unlocking....................................................................................................................................................................23
5 Advanced operation............................................................................................................................................................................25
5.1 Product info ........................................................................................................................................................................................26
5.2 Status info ...........................................................................................................................................................................................26
5.3 Brightness info..................................................................................................................................................................................26
5.4 Transfer function..............................................................................................................................................................................27
5.5 Color temperature settings ........................................................................................................................................................27
5.6 Color gamma settings ..................................................................................................................................................................27
5.7 Input channel selection................................................................................................................................................................28
5.7.1 Input channel menu ...................................................................................................................................................28
K5902150 (451920612554) /03 MDSC-8358 3
Table of contents

K5902150 (451920612554) /03 MDSC-8358
4
5.7.2 Failover input.................................................................................................................................................................28
5.8 OSD setting menu ..........................................................................................................................................................................29
5.8.1 Time-out OSD ...............................................................................................................................................................29
5.8.2 OSD menu lock ............................................................................................................................................................29
5.9 Setup menu........................................................................................................................................................................................29
6 Important information.........................................................................................................................................................................31
6.1 Safety information...........................................................................................................................................................................32
6.2 Environmental information.........................................................................................................................................................34
6.3 Biological hazard and returns ..................................................................................................................................................36
6.4 Cleaning and disinfection ........................................................................................................................................................... 37
6.5 Regulatory compliance information......................................................................................................................................37
6.6 EMC notice ......................................................................................................................................................................................... 38
6.7 Explanation of symbols................................................................................................................................................................41
6.8 Legal disclaimer...............................................................................................................................................................................44
6.9 Technical specifications...............................................................................................................................................................45
6.10 Open source license information ...........................................................................................................................................48
7 Appendix A...................................................................................................................................................................................................51
7.1 RS-232 protocol...............................................................................................................................................................................52

5
K5902150 (451920612554) /03 MDSC-8358
Welcome! 1

K5902150 (451920612554) /03 MDSC-8358
6
1.1 About the product
Overview
The Barco Medical Grade MDSC-8358 series are color high resolution liquid crystal displays especially
designed for medical imaging applications.
The MDSC-8358 is a 58”Color Flat Panel Display, intended to replace typical multi-monitor arrays in medical
applications, whenever a large display is needed in addition to high resolution, while offering the same good
rendering in greyscale medical imaging thanks to the DICOM conformance. It has been designed to meet the
specific need of typical monitor set-up in examination rooms, where monochrome and color pictures have to
be displayed and freely positioned over the display, when processed by a suitable graphic engine.
The MDSC-8358 shall provide 8 MP screen resolution, high luminance and accept digital inputs, according to
the DVI standard, with the native panel resolution of 3840 x 2160.
The MDSC-8358 can operate as a decoder or a Dual Link monitor.
Other important features like the very large viewing angle, the high brightness level, the backlight stabilization,
the grayscale correction and the compliance with the DICOM standards, will help the users avoiding
misinterpretation in medical diagnosis.
The MDSC-8358 is also suitable for viewing a large range of contents, as color temperature and color gamma
adjustments are provided. The display can also be controlled by remote, through a serial or Ethernet
communication link. The MDSC-8358 shall be supplied with VESA 400 mounting interfaces.
The MDSC-8358 is available in the following versions:
•MDSC-8358 RL: 2 power supplies, no glass, no DVI Splitter
•MDSC-8358 RLG: 2 power supplies, with glass, no DVI Splitter
1.2 What's in the box
Overview
•1x MDSC-8358 display
•2x hoist brackets
•8x screws for the hoist bracket
•8x o-rings for the screws of the hoist bracket, to be used in the display with the protection glass
•8x plastic cap, to be used in the display without the protection glass
•16x VESA mounting screws
•16x o-rings for the VESA mounting screws
•2x DVI dual link video cables
•1x printed User Guide (English)
•1x documentation disc, containing all translations of the User Guide
•Mains cables
The user guides are also available on www.barco.com/support
Keep your original packaging. It is designed for this display and is the ideal protection during
transport and storage.
1.3 About this user guide
Overview
This manual provides support to the user during the installation, set up and utilization of the MDSC-8358
display. Depending on the specific version that has been purchased, some of the features and options
described in this document may not apply to the display in user’s hands.
Welcome!

K5902150 (451920612554) /03 MDSC-8358 7
Warnings, cautions, notes and tips
There are four levels of precautionary or advisory statements that may be used in this user guide. In
descending order of importance, they are:
WARNING: Describes hazards or dangers that might result in personal injury or death.
CAUTION: Describes hazards that could damage the product.
Gives additional information about the described subject.
Gives extra advice about the described subject.
Welcome!

K5902150 (451920612554) /03 MDSC-8358
8
Welcome!

9
K5902150 (451920612554) /03 MDSC-8358
Parts, controls and
connectors 2

K5902150 (451920612554) /03 MDSC-8358
10
2.1 Front view
Overview
1
2 3 4 5
Image 2-1
1. Power On/Off
2. Enter key
3. Down key
4. Up key
5. Esc key
A 5-key keypad is located on the bottom of the display.
Parts, controls and connectors

K5902150 (451920612554) /03 MDSC-8358 11
2.2 Rear view
Overview
2
1 1 1 1 1
Image 2-2
1. VESA mount screw holes
2. Connector location
2.3 Connector view
Connectors
1 2 3 4 59 6 10 7 6 9 7
6 10 8 9
7
6
9
7
7 7
Image 2-3
1. Additional protective earth pin
2. Input power connector
3. RS-232 connector
4. Switch (between RS-232 & Ethernet)
5. Ethernet connector for monitor remote control
6. DVI-D single link / dual link connector (*)
7. +5V out connector
8. DisplayPort connector
9. DVI splitter output connector
Parts, controls and connectors

K5902150 (451920612554) /03 MDSC-8358
12
10.DVI splitter input connector
(*) 4 DVI connectors, numbered from 1 to 4 from right to left; all connectors must be installed when in SL
mode; DVIs 1 & 3 or 2 & 4 must be installed when in DL mode.
The 5V connections are available with the specific purpose to power an external DVI extender.
No other uses of the +5V are allowed.
Every +5Vout connector is connected with the nearest jack, but every pair is independent (500mA
max).
If a DVI pair is disabled, then there is no power on the connector and the jack, connected to the DVI
connector.
2.4 Connector pin assignments
2.4.1 DVI–D single link / dual link connector
Overview
Image 2-4
Pin Function
1 D2_Rx- (T.M.D.S.)
2 D2_Rx+ (T.M.D.S.)
3 GND (data 2 shield)
4 D4_RX- (T.M.D.S.)
5 D4_RX+ (T.M.D.S.)
6 SCL (for DDC)
7 SDA (for DDC)
8 N.C.
9 D1_Rx- (T.M.D.S.)
10 D1_Rx+ (T.M.D.S.)
11 GND (data 1 shield)
12 D3_RX- (T.M.D.S.)
13 D3_RX+ (T.M.D.S)
14 +5V input (form the video source system)
15 GND
16 +5V Power for DVI extenders
17 D0_Rx- (T.M.D.S.)
18 D0_Rx+ (T.M.D.S.)
19 GND (data 0 shield)
20 D5_RX- (T.M.D.S.)
21 D5_RX+ (T.M.D.S.)
22 GND (clock shield)
23 CK_Rx+ (T.M.D.S.)
24 CK_Rx- (T.M.D.S.)
Parts, controls and connectors

K5902150 (451920612554) /03 MDSC-8358 13
2.4.2 RS232 connector
Overview
Image 2-5
Pin Function
1 Not connected
2 Rx (driven by host)
3 Tx (driven by display)
4 Not connected
5 Ground
6 Not connected
7 Not connected
8 Not connected
9 Not connected
Parts, controls and connectors

K5902150 (451920612554) /03 MDSC-8358
14
Parts, controls and connectors

15
K5902150 (451920612554) /03 MDSC-8358
Display installation 3

K5902150 (451920612554) /03 MDSC-8358
16
3.1 Hoist bracket installation
WARNING: Two brackets are provided in the accessory kit to be used for service personal only.
WARNING: The hoist brackets are intended to be used during the monitor's installation phase only.
To mount and use the hoist bracket to the display
1. Mount the brackets to the display using the screws provided in the accessory kit. Verify that the screwing
operation is well done using a torque value of 4N/m.
2. Move your display as shown on the picture below.
Display installation

K5902150 (451920612554) /03 MDSC-8358 17
3. After transportation, you can remove the brackets and the 8 mounting holes can be closed, either with 8
plastic caps (version without the protection glass) or using the same screws adding the respective o-ring
(version with the protection glass).
Display installation

K5902150 (451920612554) /03 MDSC-8358
18
3.2 VESA mount installation
Overview
The display supports mounting arm & stands according to the VESA 400 mm standard.
CAUTION: Use an arm that is in compliance with VESA requirements.
CAUTION: The monitor VESA interface has been designed for a safety factor 6 (to support 6 times
the monitor weight). In the medical system, use an arm with suitable safety factor (IEC60601-1).
CAUTION: The IP21 protection level (for version with protective glass) requires the all the VESA
mount holes (on the back side of the display) are closed by the 16 screws (M6) and the 16 o-rings
provided in the installation KIT
CAUTION: The arm or stand is not provided. The product stability must be verified in the specific
usage (according to IEC 60601-1 Clause 9.4.2.2)
To mount the display to an arm stand
1. Attach the mounting arm or the stand firmly to the display using minimum 6 screws (M6) pointed out by the
red arrows in the image below. The screws can be inserted maximum 11 mm and minimum 8 mm.
Display installation

K5902150 (451920612554) /03 MDSC-8358 19
Image 3-1
3.3 Video input connection
WARNING: When the display is assembled in the medical system, take care of the anchorage of all
cables, to avoid unwanted detachment.
To connect the video inputs
1. Connect the available display(s) to the corresponding video input(s) using the appropriate video cable(s).
1 1 1
3 3
12
Image 3-2
Display installation

K5902150 (451920612554) /03 MDSC-8358
20
Overview possible inputs
1. DVI
2. DisplayPort
3. DVI splitter
3.4 Video output connection
WARNING: When the display is assembled in the medical system, take care of the anchorage of all
cables, to avoid unwanted detachment.
To connect the video outputs
1. Connect the available display(s) to the corresponding video output(s) using the appropriate video cable(s).
Image 3-3
Overview possible outputs
1. DVI splitter
The DVI single link connection cables 0.5m included in the box can be used to connect two outputs
of the video splitter to two inputs of the monitor.
3.5 Power supply connection
To connect the power supply
1. Connect the power cord set into the AC power adapter
2. Plug the power connector of the adapter into the power port of the display.
Image 3-4
3. For additional grounding, earth the display by connecting the protective earth pin to a grounded outlet by
means of a wire with a minimum AWG18 size (according to national requirements regarding the maximum
admitted cable length). Use the included M4 screw to attach the wire to the protective earth pin.
Display installation