Barracuda CloudGen F183R User manual

Barracuda CloudGen Firewall
F183R (Rugged) 1 / 7
F183R (Rugged)
https://campus.barracuda.com/doc/73008380/
CloudGen Firewall F183R
Warranty and Safety Instructions
Opening your Barracuda Networks appliance or removing its warranty label will void your
warranty and hardware support.
Barracuda Networks Appliance Safety Instructions
Power supply is not included in packaging and needs to be ordered separately
(BNGPSUR1a/BNGIPSUR1a).
To prevent damage, connect the DC plug to the appliance before plugging the power adapter
into the AC outlet.
Default Port Configuration
Port Label OS Notation Speed/Type Management Port
1 p1 10/100/1000 MBit RJ45 X
2 p2 10/100/1000 MBit RJ45
3 p3 10/100/1000 MBit RJ45
4 p4 10/100/1000 MBit RJ45
5 p5 10/100/1000 MBit RJ45
6 p6 1 GbE Optical Fiber SFP
7 p7 1 GbE Optical Fiber SFP

Barracuda CloudGen Firewall
F183R (Rugged) 2 / 7
The CloudGen Firewall hardware appliances ship with a Quick Start Guide. Follow this guide to
connect to your firewall. To protect your network, follow the instructions for the standard
deployment.
Hardware Specifications
Interface
Model F183R 5 x 1 GbE RJ45
2 x 1 GbE SFP Optical Fiber
USB 2.0 1
USB 3.0 1
Serial console 1x DB9 RS232
Data Storage
RAM [GB] 4 or higher
Mass Storage
Type SSD
Size [GB] 100
Size, Weight, Dimensions
Appliance weight [kg] 1.0
Carton weight with appliance [kg] N/A
Appliance size: width x depth x height [mm] 78 x 127x 146
Carton size: width x depth x height [mm] N/A
Form factor Compact, DIN rail mount
Hardware
Cooling No fan
Environmental
Noise emission [db/A] n/a
Operating temperature [°C] -40 to +75
Storage temperature [°C] -40 to +85
Operating humidity (non-condensing) 5% to 95%
Magnetic Isolation Protection 1.5 KV built-in
Certifications & Compliance
CE emissions Yes
CE electrical safety Yes
FCC emissions Yes

Barracuda CloudGen Firewall
F183R (Rugged) 3 / 7
ROHS compliant Yes
Power & Efficiency
Power supply Dual, with two external PSU adapters
Power supply type External
External power supply is not included in delivery of the appliance and needs to be ordered
individually.
Power connector Phoenix contact
6-pin connector w/ lock
Power type [AC/DC] DC
Input rating [Volts] 12 - 36
Wattage / max. power draw [W] 60
Max. power draw (@ 24Vdc) [A] 2
Max. heat dissipation [W] 60
IP Code • IP30 - With a 6-pin phoenix connector used.
• IP20 - With a 2-pin phoenix connector used.
The hardware specifications list was valid at the time this manual was published. The listed
components are subject to change at any time, as Barracuda Networks may change hardware
components due to technological advancements. Therefore, the list may not reflect the current
hardware configuration of the Barracuda appliance it was delivered with.
Dual Power Supply Connector and P-Fail relay (6-PIN connector)
F183R appliances are equipped with a 6-pin connector, for connecting two external power supplies
and an alarm device in case of failure. The appliance can run with one or two external power supplies.
As F183R comes with dual power and P-fail relay features, the P-Fail relay will have the signaling
device triggered as the power supply fails. The relay circuit is set to be open by default and closed
when either or neither of the powers is detected; the closed (or short) circuit then allows the alarm
device to be activated. Please note that the alarm device needs its own power circuit.
PWR1 PWR2 Circuit Status Alarm Device
Detected Detected Open (Normal) Off
Not Detected Detected Closed Activated
Detected Not Detected Closed Activated
Not Detected Not Detected Closed Activated

Barracuda CloudGen Firewall
F183R (Rugged) 4 / 7
LEDs and Acoustic Signals
Your appliance is equipped with a variety of LEDs and acoustic signals. The front panel contains one
power LED (green), one status LED (greed/red), one disc LED (yellow), and various port LEDs. Two
acoustic signals indicate appliance boots up or installation was completed.
The Status LED is labeled either with a heartbeat symbol or the term 'Status'. It indicates the
appliance’s operational state by changing colors between green and red and by changing between
blinking and steady glowing. The tables below show the different meanings of the different glowing
states and acoustic signals:
LED Color Status Meaning Installation Meaning Operation
All LEDs Off Off
Appliance is powered off or
installation has not initialized
far enough for LED control when
installation is started.
Appliance is powered off.
Power LED front side -
GREEN Steady - Appliance is plugged in and is on.
Status LED front side -
GREEN/RED Off
Installation has not initialized
far enough for LED control when
installation is started.
-

Barracuda CloudGen Firewall
F183R (Rugged) 5 / 7
Status LED front side -
GREEN Steady
After a hotfix installation, the
LED turns to green until the
next reboot in case the hotfix
installation was successful. This
feature requires firmware 7.1.3
or higher OR 7.2.2 or higher.
When installing from USB drive:
after 3 beeps, pull out the USB
and reboot the box by switching
power off and back on.
Box is running normally, or
installation has finished
successfully.
Status LED front side -
GREEN
Blinking
slowly (1/s
interval)
Normal installation
Appliance is either booting,
shutting down, or
performing a system
update.
Status LED front side -
RED Steady
The LED turns to red until the
next reboot in case the hotfix-
or USB installation failed.
Appliance is halted and may
be disconnected, or an error
occurred preventing the
appliance from entering the
up state.
Disc LED - YELLOW Blinking Appliance is reading or writing
on storage.
Appliance is accessing the
internal storage.
Port LEDs -
GREEN/YELLOW
Left
blinking
Data transfer – Yellow (10/100
Mbps) Port in use.
Right
steady - Port is on.
Port LEDs 6 and 7 for
Optical Fiber ports -
GREEN
Steady - Port is on.
Blinking Data transfer Port is in use.
PSU LEDs - GREEN
Steady PSU modules connected and
running
Power supply unit is up and
running.
Off Power defective, standby, or
shutdown
Power supply unit is off or in
standby mode.
Acoustic Signal Frequency Meaning
Beep 1 time
(1sec.) The appliance is booting.
Beep/Jingle 3 times
(1sec.-1sec.-1sec.)
Installation was completed successfully. The appliance is
halted for a reboot. After reboot, one beep will again indicate
booting.
LED and acoustic signals may vary between different appliance models.
Serial Console Port

Barracuda CloudGen Firewall
F183R (Rugged) 6 / 7
In order to establish a console connection to the appliance using an RS232 serial cable, you need to
configure the serial port on the terminal using the following parameters:
Parameter Value
Baud 19200
Bits 8
Stop bit 1
Parity None
Handshake None

Barracuda CloudGen Firewall
F183R (Rugged) 7 / 7
Figures
F183_R.PNG1.
F183R-S.png2.
F183R-L.png3.
F183R-B.png4.
F183T.png5.
P-Fail.png6.
© Barracuda Networks Inc., 2021 The information contained within this document is confidential and proprietary to Barracuda Networks Inc. No
portion of this document may be copied, distributed, publicized or used for other than internal documentary purposes without the written consent of
an official representative of Barracuda Networks Inc. All specifications are subject to change without notice. Barracuda Networks Inc. assumes no
responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this
publication without notice.