Barracuda CloudGen F400 C Standard Model User manual

Barracuda CloudGen Firewall
F400 Revision C 1 / 7
F400 Revision C
https://campus.barracuda.com/doc/92766582/
F400 Rev. C Standard Model
F400 Rev. C Sub-Model .F20
The standard model of Barracuda's CloudGen Firewall F400 (Rev. C) comes with eight 10/100/1000
MBit RJ45, two 10Gbit SFP+ Ethernet ports, and a single power supply. Other F400 C model types
(.F20) provide different port combinations and a dual power supply.
F400 C Standard Model Port Configuration
Port Label OS Notation Speed/Type Management Port
1 p1 10/100/1000 MBit RJ45 X
2 p2 10/100/1000 MBit RJ45
3 p3 10/100/1000 MBit RJ45
4 p4 10/100/1000 MBit RJ45
5 p5 10/100/1000 MBit RJ45
6 p6 10/100/1000 MBit RJ45
7 p7 10/100/1000 MBit RJ45
8 p8 10/100/1000 MBit RJ45
A1 a1 10 GbE Optical Fiber SFP+
A2 a2 10 GbE Optical Fiber SFP+

Barracuda CloudGen Firewall
F400 Revision C 2 / 7
F400 C Sub-Model .F20 Port Configuration
Label OS Notation Speed/Type Management Port
1 p1 10/100/1000 MBit RJ45 X
2 p2 10/100/1000 MBit RJ45
3 p3 10/100/1000 MBit RJ45
4 p4 10/100/1000 MBit RJ45
5 p5 10/100/1000 MBit RJ45
6 p6 10/100/1000 MBit RJ45
7 p7 10/100/1000 MBit RJ45
8 p8 10/100/1000 MBit RJ45
9 p9 1 GbE Optical Fiber SFP
10 p10 1 GbE Optical Fiber SFP
11 p11 1 GbE Optical Fiber SFP
12 p12 1 GbE Optical Fiber SFP
A1 a1 10 GbE Optical Fiber SFP+
A2 a2 10 GbE Optical Fiber SFP+
The CloudGen Firewall hardware appliances ship with a Quick Start Guide. Follow this guide to
connect to your firewall. To protect your network, follow the instructions for the standard
deployment.
Hardware Specifications
Warranty and Safety Instructions
Opening your Barracuda Networks appliance or removing its warranty label unless instructed to
do so by Barracuda Networks support will void your warranty and hardware support. Barracuda
Networks Appliance Safety Instructions
Interface
Standard Model • 8x 1 GbE
• 2x 10 GbE SFP+
Model F20
• 8x 1 GbE Copper
• 4x 1 GbE SFP
• 2x 10 GbE SFP+
USB 2.0 2

Barracuda CloudGen Firewall
F400 Revision C 3 / 7
Serial console 1 [RJ45]
Data Storage
RAM [GB] 8
Mass Storage
Type SSD
Size [GB] 180 GB or higher
Size, Weight, Dimensions
Appliance weight [kg] (F400 / F400.F20) 8.4 / 9.3
Carton weight with appliance [kg ] (F400 / F400.F20) 9.4 / 10.2
Appliance size: width x depth x height [mm] 440 x 440 x 44
Carton size: width x depth x height [mm] 555 x 755 x 203
Form factor 1U Rack Mount
Hardware
Display Yes
Cooling Fan
Power supply (F400 / F400.F20) Single, internal / Dual hot swap, internal
Environmental
Noise emission [db/A] N/A
Operating temperature [°C] 0 to +40
Storage temperature [°C] -20 to +70
Operating humidity (non-condensing) 5% to 85%
Certifications & Compliance
CE emissions Yes
CE electrical safety Yes
FCC emissions Yes
ROHS compliant Yes
Power & Efficiency
Power supply type Internal
Power type [AC/DC] AC
Input rating [Volts] 100-240
Input frequency [Hz] 50-60
Auto sense Yes
Wattage / max. power draw [W] (F400 / F400.F20) 1610 / 1725
Max. power draw (@ 230V) [A] (F400 / F400.F20) 7 / 7.5
Max. heat dissipation [W] (F400 / F400.F20) 29 / 31
Max. heat dissipation [BTU] (F400 / F400.F20) 98 / 106

Barracuda CloudGen Firewall
F400 Revision C 4 / 7
Energy efficiency [average] > 85%
The hardware specifications list was valid at the time this manual was published. The listed
components are subject to change at any time, as Barracuda Networks may change hardware
components due to technological advancements. Therefore, the list may not reflect the current
hardware configuration of the Barracuda appliance it was delivered with.
LEDs and Acoustic Signals
Your appliance is equipped with a variety of LEDs. The tables below show the different meanings of
the different glowing states and acoustic signals:
LED Color Status Meaning Installation Meaning Operation
All LEDs Off Off
Appliance is powered off or
installation has not initialized
far enough for LED control
when installation is started.
Appliance is powered off.
Power LED front side -
GREEN Steady
Installation was completed
successfully, appliance is halted
for reboot or installation was
not yet initialized far enough for
LED control.
Appliance is plugged in and
is on.
Status LED front side -
GREEN/RED Off
Installation has not initialized
far enough for LED control
when installation is started.
-
Status LED front side -
GREEN Steady
Installation was completed
successfully, appliance is halted
for reboot.
Appliance is up and running.
Status LED front side -
GREEN Blinking Normal installation.
Appliance is either booting,
shutting down, or
performing a system
update.
Status LED front side -
RED Steady - Appliance is halted and may be disconnected.
Status LED front side -
RED Blinking Error during installation.
An error has appeared
preventing the appliance
from entering the up state.
Status LED front side -
RED/GREEN Steady - Appliance is in ART mode.
Disc LED front side -
YELLOW Blinking Appliance is reading or writing on storage.
Appliance is accessing the
internal storage.

Barracuda CloudGen Firewall
F400 Revision C 5 / 7
Port LEDs -
GREEN/YELLOW
Left
blinking
Data transfer – Yellow (10/100
Mbps) Port in use.
Right
steady - Port is on.
PSU LEDs - GREEN
Steady PSU modules connected and
running
Power supply unit is up and
running.
Off Power defective, standby, or
shutdown
Power supply unit is off or in
standby mode.
Acoustic Signal Frequency Meaning Installation
Beep 1 time Unit starts booting
Beep 3 times Installation is completed successfully and appliance is halted for
reboot. After reboot, one beep indicates booting.
Not all appliances support yellow and/or red LED colors. Depending on the appliance type, the
status LED might be on by default and it might take some time during boot and installation to
start either blinking or changing the color. Furthermore, the status LED might blink at different
frequencies.
Serial Console Port
In order to establish a console connection to the appliance using a serial cable (RJ45), you need to
configure the serial port on the terminal using the following parameters:
Parameter Value
Baud 19200
Bits 8
Stop bit 1
Parity None
Handshake None
LC Display
Navigating
This security appliance features a key pad with four keys and an LCD panel on the left side of the
front panel. These may be used to obtain certain information and to perform certain commands
directly on the appliance.

Barracuda CloudGen Firewall
F400 Revision C 6 / 7
Keyboard Button Command
Left arrow or Escape key Navigates back or acts like an Escape key while working in the LCD menu.
Up arrow Navigates up or increases a value.
Down arrow Navigates down or decreases a value.
Right arrow or Enter Navigates forwards or acts like an Enter key for confirming a configuration
step.
LCD Display Menu
You may use the LCD display and the keypad to access certain appliance features. Use the up
and down keys to navigate through the items of the main menu.
The LCD menu features the following items from top to bottom:
LCD Menu Meaning
Appliance type, OS version and
release number This is the default display.
IP address and subnet mask Shows the configured IP address and subnet mask of the
appliance.
Time and date Shows time and date currently configured on the appliance.
Uptime of Barracuda OS The uptime in days, hours and minutes.
Serial number of the appliance Unique identifier for the appliance.
Shutdown menu Enables you to shut down the appliance.
Reboot menu Enables you to reboot the appliance.
Menu to change the
management IP address Configure the IP address for the management port.
Menu to boot into ART during the
next reboot
Enables you to set a flag that will cause the appliance to boot into
ART the next time it is rebooted.
Once set, this flag can not be deleted through the menu. When
rebooted, the appliance will not start Barracuda OS, but ART
instead. You may connect to the appliance by using the serial
console or by SSH. A Control Center managed box running in ART
mode cannot be managed through the CC, although it will build a
connection to the CC signalling its presence.
Rack Mounting
For information on how to mount your appliance, see Rack Installation for Barracuda CloudGen
Firewall and Barracuda CloudGen WAN.

Barracuda CloudGen Firewall
F400 Revision C 7 / 7
Figures
F400C-Front.png1.
F400C-Rear.png2.
F400C-F20-Front.png3.
F400C-F20-Rear.png4.
© Barracuda Networks Inc., 2021 The information contained within this document is confidential and proprietary to Barracuda Networks Inc. No
portion of this document may be copied, distributed, publicized or used for other than internal documentary purposes without the written consent of
an official representative of Barracuda Networks Inc. All specifications are subject to change without notice. Barracuda Networks Inc. assumes no
responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this
publication without notice.