Bartec MC 92N0ex Series User manual

BARTEC GmbH
Contact:
Max-Eyth-Straße 16
Phone: [phone]
[e-mail]
97980 Bad Mergentheim
Fax: [phone]
Download:
Germany
www.bartec.de/automation-download
User Manual - TRANSLATION
Mobile Computer MC92N0
ex
Type 17-A1A.-…./…….
Type B7-A2A.-…./…….
ATEX/IECEx Zone 1
ATEX Zone 2 / 22
UL Class I, II, III Division 1
UL Class I, II, III Division 2
Document No.: 11-A1A2-7D0001 / 357929
Status: 07 October 2016 / Revision D
Reservation: Technical data subject to change without notice. Changes, errors and
misprints may not be used as a basis for any claim for damages.
Contents Page
English 1 – 73
Appendix Declaration of Conformity

Table of Content Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Technical data subject to change without notice.
Revision D / Status 10/2016

Table of Content Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Technical data subject to change without notice.
Revision D / Status 10/2016

Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Table of Content
Technical data subject to change without notice.
Revision D / Status 10/2016
1. Basic Security Information................................................................................................................... 1
1.1 Information on this User Manual....................................................................................... 1
1.1.1 Languages........................................................................................................................ 2
1.1.2 Changes in the document.................................................................................................2
1.2 Handling the product........................................................................................................2
1.3 Intended use..................................................................................................................... 2
1.3.1 Exclusive purpose............................................................................................................ 2
1.3.2 Unintended use................................................................................................................ 2
1.4 Duties of the operator.......................................................................................................3
1.5 Safety information.............................................................................................................3
1.5.1 General safety information...............................................................................................3
1.6 Maintenance..................................................................................................................... 3
1.6.1 Servicing........................................................................................................................... 3
1.6.2 Inspection......................................................................................................................... 3
1.6.3 Repairs............................................................................................................................. 4
1.6.4 Commissioning................................................................................................................. 4
1.7 Protection type, test certificate and standards.................................................................. 4
1.8 Warranty........................................................................................................................... 4
1.9 Co-applicable documents – Set of documents................................................................. 6
1.10 Definitions......................................................................................................................... 6
1.11 Configuration.................................................................................................................... 7
2. Product Description.............................................................................................................................. 8
2.1 Definition MC92N0ex-IS Version.......................................................................................8
2.2 Definition MC92N0ex-NI Version....................................................................................... 9
2.3 Operation........................................................................................................................ 10
2.3.1 RFID / RuBee................................................................................................................. 11
3. Technical Data..................................................................................................................................... 12
3.1 Explosion protection IS...................................................................................................12
3.2 Explosion protection NI...................................................................................................13
3.3 Other applicable standards.............................................................................................14
3.4 Features......................................................................................................................... 16
3.4.1 Performance features..................................................................................................... 16
3.4.2 Physical features............................................................................................................16
3.4.3 User environment...........................................................................................................18
3.4.4 Application development................................................................................................19
3.4.5 Voice and data transmission Wireless LAN....................................................................20
3.4.6 Voice and data transmission Wireless PAN...................................................................20
3.4.7 Headset.......................................................................................................................... 20
3.4.8 Data Capture Options..................................................................................................... 21
3.4.9 Decodable barcode types...............................................................................................26
3.4.10 RFID/RuBee Option........................................................................................................26
3.5 Battery............................................................................................................................ 31
3.6 External interfaces.......................................................................................................... 31
3.7 Product labelling............................................................................................................. 32
3.8 Laser labels.................................................................................................................... 33

Table of Content Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Technical data subject to change without notice.
Revision D / Status 10/2016
4. Transport and Storage ....................................................................................................................... 34
4.1 Transport........................................................................................................................ 34
4.2 Storage...........................................................................................................................34
5. Commissioning................................................................................................................................... 35
5.1 Scope of delivery............................................................................................................ 35
5.1.1 Accessories optional.......................................................................................................35
5.2 Requirements in potentially explosive atmosphere........................................................36
5.3 First steps....................................................................................................................... 37
5.4 Structure......................................................................................................................... 37
5.5 Handling accessories.....................................................................................................38
5.5.1 Insert battery .................................................................................................................. 38
5.5.2 Change keypad.............................................................................................................. 39
5.5.3 Insert SD card.................................................................................................................42
5.5.4 Remove/replace screen protector..................................................................................43
5.5.5 Leather holster ...............................................................................................................44
5.5.6 Headset.......................................................................................................................... 44
5.6 RFID/RuBee................................................................................................................... 45
5.6.1 Versions......................................................................................................................... 45
5.6.2 Reading range/direction................................................................................................. 46
5.6.3 Software.........................................................................................................................47
5.7 Connection to a PC........................................................................................................47
5.7.1 Active Sync..................................................................................................................... 47
5.7.2 Windows Mobile Device Center......................................................................................47
6. Operation............................................................................................................................................. 48
6.1 Final inspection...............................................................................................................48
6.2 Handling......................................................................................................................... 48
6.3 Care and cleaning.......................................................................................................... 49
6.3.1 Care................................................................................................................................ 49
6.3.2 Cleaning......................................................................................................................... 49
6.3.3 Suitable materials........................................................................................................... 50
6.4 Operation recommendations and requirements.............................................................51
6.4.1 Basic safety andhealth protection requirements............................................................51
6.4.2 Instructions on the useof Wireless Devices...................................................................53
6.4.3 Equipment of the laser devices......................................................................................54
6.4.4 LED Devices................................................................................................................... 55
6.4.5 Restrictions to wireless devices......................................................................................55
6.5 Frequency of Operation – FCC and IC...........................................................................56
6.6 Electromagnetic fields....................................................................................................58
6.6.1 International....................................................................................................................58
6.6.2 Handheld devices...........................................................................................................59
6.7 Optimise operating times/change energy settings (WEH 6.5.3 only)..............................60
6.7.1 Automatic shutdown in thecase of lengthy standby periods..........................................60
6.7.2 Change display backlight (increases the operating time of the battery).........................60
6.7.3 Change keypadbackground lighting (increases the operating timeof the battery)........61
6.7.4 Switch off radioconnections........................................................................................... 62
6.8 Software versions...........................................................................................................62
6.8.1 OEM............................................................................................................................... 62

Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Table of Content
Technical data subject to change without notice.
Revision D / Status 10/2016
6.8.2 AKU................................................................................................................................63
6.8.3 Bluetooth........................................................................................................................ 63
6.8.4 “Fusion”software............................................................................................................. 64
7. Faults and Troubleshooting............................................................................................................... 65
7.1 Resetting the MC92N0ex................................................................................................. 65
7.1.1 Windows Embedded Handheld and Windows CE Devices............................................65
7.1.2 On a Windows CE7.0 device.........................................................................................65
7.1.3 On a Windows Embedded Handheld6.5.3 device.........................................................67
8. Service, Inspection, Repair................................................................................................................ 69
8.1 Service intervals............................................................................................................. 69
8.2 Inspection....................................................................................................................... 69
8.3 Service and repair work.................................................................................................. 69
8.3.1 Information on sending in for repairs.............................................................................. 70
9. Disposal............................................................................................................................................... 71
10. Dispatch and Packaging Information................................................................................................ 71
11. Accessories, Spare Parts................................................................................................................... 72
12. Additional Information........................................................................................................................ 74
12.1 Links............................................................................................................................... 74
Appendix: Declaration of Conformity

- blank -

Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Basic Security Information
Technical data subject to change without notice.
Revision D / Status 10/2016 1/73
1. Basic Security Information
1.1 Information on this User Manual
Read carefully before putting the devices into operation.
The User Manual is a fixed part of the product. It must be kept in the direct vicinity of
the device
and the installation, operating and service staff must have access to it at all
times.
The User
Manual contains important information, safety instructions and test certificates
which are necessary for the perfect function of the device inoperation.
The User Manual
is directed at all individuals concerned with the assembly, installation,
commissionin
g and servicing of the product. The applicable guidelines and standards
for areas with gas and dust atmosphere (99/92/EC, EN 60079-17, EN 60079-19,
IEC 60079-17, IEC 60079-19) must be observed when conducting thiswork.
Knowledge of the safety and warning information in this User Manual and the
strict
compliance with it is essential for safe installation and commissioning
. Accidents,
injuries and material damage can be avoided by
circumspect handling and
systematically following the instructions.
The figures in this User Manual
serve to illustrate the information and descriptions.
They are not necessarily completely transferrable and may differ slightly from the actual
execution of the device.
Safety and warning information is particularly emphasised in this User Manual and
marked by symbols.
DANGER
DANGER describes a directly imminent danger.
If not avoided, death or severe injury
will be the consequence.
WARNING
WARNING
describes a possibly imminent danger. If not avoided, death or severe
injury may be the consequence.
CAUTION
CAUTION describes a possibly imminent danger. If not avoi
ded, mild or slight injury
may be the consequence.
ATTENTION
ATTENTION describes a possibly damaging situation. If not avoided, t
he plant or
objects in its vicinity may be damaged.
Important information on effective, economic & environmentally compliant handling.

Basic Security Information Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
2/73 Technical data subject to change without notice..
Revision D / Status: 10/2016
1.1.1 Languages The original User Manual is written in German. All other available languages are
translations of the original User Manual.
The User Manual is available in German and English. If further languages are required,
these must be requested from BARTEC or stated on placingan order.
1.1.2 Changes in the document
BARTEC reserves the right to change the content of this document without notification.
No warranty is assumed for the correctness of the information. In cases of doubt, the
German safety instructions apply because it is not possible to rule out errors of translation
or printing. In the case of legal disputes, the “General Terms and Conditions of Business”
of the BARTEC Group alsoapply.
The current versions of the datasheets, operating instructions, certificates and EC
declarations of conformity can be downloaded from www.bartec-group.com under
Products and Solutions in the product area “Automation technology” or may be requested
directly from BARTEC GmbH.
1.2 Handling the product
The product described in this User Manual left the factory in a perfect and tested state in
terms of safety. To maintain this state and to achieve a perfect and safe operation of this
product, it may only be operated in the manner described by the manufacturer. In
addition, the perfect and safe operation of this product requires correct transportation,
proper storage and careful operation.
The safe and perfect handling of the Mobile Computer is a prerequisite for its perfect and
correct functioning.
1.3 Intended use
1.3.1 Exclusive purpose
The Mobile Computer MC92N0ex is a handheld piece of electrical equipment. It serves the
purpose of the mobile recording, processing and radio transmission of data within
potentially explosive atmospheres.
It is used exclusively in combination with devices which comply with the requirements
placed on the overvoltage category I.
The admissibleoperating data of the device used must be considered.
1.3.2 Unintended use Any other use is unintended and may lead to damage and accidents. The manufacturer
shall not be liable for anyuse extending beyondthe exclusive purpose.

Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Basic Security Information
Technical data subject to change without notice.
Revision D / Status 10/2016 3/73
1.4 Duties of the operator
The operator undertakes to only permit persons to work with the Mobile Computers who
are acquainted with the basic regulationson safety and accident prevention, and who
have been inducted in the use of the Mobile Computer;
have read and understood the documentation, the safetychapter and the warnings.
The operator checks that the safety and accident prevention regulations applicable to the
respective case of use have been observed.
1.5 Safety information
1.5.1 General safety information
Do not dry wipe orclean devices in potentially explosive atmospheres!
Do not open devices in potentially explosive atmospheres.
General statutory provisions or guidelines on occupational health and safety, accident
prevention provisions andenvironmental protection laws must be heeded, e.g.
German Industrial Health and Safety Ordinance (BetrSichV) and nationally applicable
ordinances.
Use suitable clothing and shoes with respect to the dangerof hazardous electrostatic
charges.
Avoid heat influences outside the specified temperature range.
Protect device from external influences! Do not expose device to caustic/aggressive
liquids, vapours or spray. In the caseof malfunction or damaged enclosure, remove
the device immediately from the potentially explosive atmosphere and bring it to a
safe place.
1.6 Maintenance
The pertinent erection and operating provisions for electrical systems must be observed!
(e.g. Directive 99/92/EC, Directive 94/9/EC, BetrSichV and nationally applicable
ordinances EN 60079-14, IEC 60079-14 and the series DIN VDE 0100)!
Observe thenational waste disposal regulations whendisposing of the devices.
1.6.1 Servicing No constant servicing will be necessary if operated correctly under consideration of the
assembly instructions and environmental conditions. See Chapter “Service, inspection,
repair” in this respect.
1.6.2 Inspection According to EN 60079-17, IEC 60079-17, EN 60079-19 and IEC 60079-19, the operator
of electrical systems in potentially explosive atmospheres is obliged to have these
inspected by an electrician to ensure correct condition.

Basic Security Information Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
4/73 Technical data subject to change without notice..
Revision D / Status: 10/2016
1.6.3 Repairs Repairs to explosion-protected devices may only be performed by authorised personnel
with original spare parts and according to the state of the art. The applicable provisions
must be observedin this respect.
1.6.4 Commissioning It must be checked that all components and documents are available before
commissioning.
1.7 Protection type, test certificate and standards
Labels on explosion protection and the test certificate are attached to the device. See
Chapter 3 “Technical data” with respect to labelling.
The guidelines and standards applicable to the Mobile Computer for devices and
protected systems for intended use in potentially explosive atmospheres are provided in
Chapter 3 “Technical data”.
1.8 Warranty
WARNING
No changes or conversions may be made without the manufacturer’s written
consent.
If components other than
those specified are used, explosion protection will no longer
be assured. It cannot be guaranteed that parts procured from other suppliers have
been designed and manufactured in conformance to safety requirements and with the
necessary stress tolerance.
Contact the manufacturer and obtain his approval before performingany changes
or retrofits. Use only original spare and expendable parts.
The manufacturer shall exclusively assume the complete warranty only
for spare parts
ordered from him.
Our “General Terms and Conditions of Sale and Delivery” shall apply in principle. These
shall be made available to the operator on signing of contract at the latest. Warranty and
liability claims in the case of injury and damage to property shall be excluded if they are
attributable toone or several of the following causes:

Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Basic Security Information
Technical data subject to change without notice.
Revision D / Status 10/2016 5/73
Unintended use of the Mobile Computers.
−Incorrect assembly, commissioning, operation andservicing.
−Failure to observe the information in the User Manual with respect to transport,
storage, assembly, installation, commissioning, operation and service.
−Independent structural changes.
−Faulty monitoringof parts subject to wear and tear.
−Incorrectly performed repairs.
−Cases of disaster through the impact of foreign bodiesand force majeure.
We grant a warranty period of one year starting from the date of delivery from the Bad
Mergentheim factory on the Mobile Computers and their accessories (exception: battery 6
months). This warranty covers all parts of the delivery and shall be restricted to the free
replacement or repair of the defective parts in our Bad Mergentheim factory. For this
purpose, any packaging supplied must be kept where possible. In the case of warranty,
the goods must be returned to us after written agreement. There shall be no claim to
repair at the sight of erection.
The versions, components, monitors and windows shown in this User Manual are merely
examples and may deviate from the actual display.
The information contained herein refers to the explosion-protected version of series
MC92N0ex.
This User Manual contains all important information on the subject of explosion protection.
The original user manuals and productinformation of ZEBRA with information on handling
and commissioning are also available. In the case of overlaps, the information in this User
Manual shall take priority and shall supersede the information from ZEBRA.

Basic Security Information Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
6/73 Technical data subject to change without notice..
Revision D / Status: 10/2016
1.9 Co-applicable documents – Set of documents
BARTEC
−User Manual to the Mobile Computer series MC92N0ex – The use of the explosion-
protected version of the Mobile Computer series MC92N0ex is described in this User
Manual.
−Technical datasheet for the explosion-protected version of the Mobile Computer
series MC92N0ex – This technical datasheet contains the most important explosion-
relevant technical dataas well as general technicaldata.
ZEBRA
The set of documentation of the MC9200 contains information on the respective user
requirements and covers the following:
−Quick Start Guide for the MC9200 – The commissioning of the Mobile Computer
MC9200 is described in this User Manual.
−User Manual for the MC92N0 – The use of the Mobile Computer MC MC9200 is
described in this User Manual.
−Integration Manual for the MC9200 – The setting up of the Mobile Computer MC9200
including accessories is described in this User Manual.
−User Manual for Microsoft® applications for Windows Embedded Handheld 6.5.3 for
Enterprise Mobility devices – The use of Microsoft applications is described in this
User Manual.
1.10 Definitions
Some abbreviations are used in the documentation.
IS = Intrinsically Safe / Intrinsic Safety =>
is used as an umbrella term for Zone 1 and Division 1 versions
NI = Non-Incendive / non-sparking =>
is used as an umbrella term for Zone 2 and Division 2 versions
MC92N0ex = Stands for the entire explosion-proof product series.

Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Basic Security Information
Technical data subject to change without notice.
Revision D / Status 10/2016 7/73
1.11 Configuration
This Manual refers to thefollowing configurations:
Configuration
Version
Wireless

WLAN: 802.11 a/b/g/n
WPAN: Bluetooth 2.1 EDR
Reader options
RFID-LF 125 kHz / 134 kHz
RFID-HF 13.56 MHz
RFID-UHF (EU) 865.6 to 867.5 MHZ
RFID-UHF (US) 902 to 928 MHz
RuBee 65.5 kHz / 131 kHz
Display

3.7" VGA Color Display
Memory
1 GB RAM / 2 GB Flash Memory
Scanner
options 
1D-Laser Scanner Normal Range
1D-Laser Scanner Long Range
1D-/2D-Imager Short Range
1D-/2D-Imager Mid Range (only NI-version)
1D-/2D-Long Range Imager (only NI-version)
1D-/2D-Imager DPM (Direct Part Marking)
Operating
system options Windows WEH 6.5.3
Windows CE 7.0
Android KitKat 4.4
Keypad
options 
28 Keypad (Numeric keys can be used direct, Alpha keys
and other key functions can be used via function keys)
43 Keypad (Numeric- and function keys can be used direct,
alpha keys and other key functions can be used via function
keys)
53 Keypad (Numeric- an
d alpha keys cen be used direct,
other key functions can beused via function keys)
53 Keypad with layout for VT Emulation
53 Keypad with layout for 3270 Emulation
53 Keypad with layout for 5250 Emulation
The Emulation software is not part of the device.
Other specific information on the keypad is provided under Technical Data or in the
ZEBRA documentation.

Product Description Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
8/73 Technical data subject to change without notice..
Revision D / Status: 10/2016
2. Product Description
2.1 Definition MC92N0ex-IS Version
The MC92N0ex-IS Mobile Computer is a robust mobile computer designed for industrial
use and has been specially modified by BARTEC for use in hazardous (potentially
explosive) areas in
−ATEX and IECEx Zone 1
−UL Class I, II Division 1
−UL Class III
This means that the extensive communication and data acquisition options which are
already standard in otherareas are available to the user in hazardous areas also.
Its ergonomic design and easy operation make it an ideal support in the attainment of fast
data availability in enterprise processes. Various versions of keypad are available for
manual data capture.
Other data capture options are provided by the integrated 1D or 1D/2D scan engine for
capturing barcodes andvarious optional RFID/RuBee readers.
The ergonomically mounted scan triggers on the MC92N0ex-IS allow data to be captured
easily in one-hand operation. Several technologies are available for data communication
with other systems and company divisions.
−Wireless LAN (WLAN),
−Wireless PAN (WPAN) (Bluetooth)
−Ethernet or USBconnection through docking station

Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Product Description
Technical data subject to change without notice.
Revision D / Status 10/2016 9/73
These modules, which are integrated in the device, allow a seamless transmission of
voice and data into the company’s network.
Other advantages in use are its sturdy construction, easy-to-read 3.7'' VGA colour display
with touch technology and highly efficient lithium-ion battery.
A 1 GHz dual-core processor in the MC92N0ex-IS ensures fast process execution. Easy
application development is facilitated by the three operating systems, Microsoft Windows
WEH 6.5.3, CE 7.0 or Anroid KitKat 4.4, in conjunction with the Enterprise Mobility
Developer Kits (EMDK) or RohMobile Suite from Zebra.
1 GB RAM and 2 GB flash memory are integrated in the device for storing user-defined
applications and data. For larger applications and volumes of data, BARTEC offers SD
memory cards.
2.2 Definition MC92N0ex-NI Version
The MC92N0ex-NI Mobile Computer is a robust mobile computer designed for industrial
use and has been specially modified by BARTEC for use in hazardous (potentially
explosive) areas in
−ATEX Zone 2 / 22
−UL Class I, II Division 2
−UL Class III.
This means that the extensive communication and data acquisition options which are
already standard in otherareas are available to the user in hazardous areas also.

Product Description Mobile Computer MC92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
10/73 Technical data subject to change without notice..
Revision D / Status: 10/2016
Its ergonomic design and easy operation make it an ideal support in the attainment of fast
data availability in enterprise processes. Various versions of keypad are available for
manual data capture.
Other data capture options are provided by the integrated 1D or 1D/2D scan engine for
capturing barcodes, RuBee reader and various optional RFID readers.
The ergonomically mounted scan triggers on the MC92N0ex-NI allow data to be captured
easily in one-hand operation. Several technologies are available for data communication
with other systems and company divisions.
−Wireless LAN (WLAN),
−Wireless PAN(WPAN) (Bluetooth)
−Ethernet or USB connection through docking station
These modules, which are integrated in the device, allow a seamless transmission of
voice and data into the company’s network.
Other advantages in use are its sturdy construction, easy-to-read 3.7'' VGA colour display
with touch technology and highly efficient lithium-ion battery.
A 1 GHz dual-core processor in the MC92N0ex-NI ensures fast process execution. Easy
application development is facilitated by the three operating systems, Microsoft Windows
WEH 6.5.3, CE 7.0 or Android KitKat 4.4, in conjunction with the Enterprise Mobility
Developer Kits (EMDK) or RohMobile Suite from Zebra.
1 GB RAM and 2 GB flash memory are integrated in the device for storing user-defined
applications and data. For larger applications and volumes of data, BARTEC offers SD
memory cards.
2.3 Operation
The Mobile Computer MC92N0ex-IS is a handheld electrical device. It serves the purposes
of the mobile entry, processing and radio transmission of data within potentially explosive
atmospheres.
It is used exclusively in combination with devices which comply with the requirements
placed on the overvoltage category I.
VORSICHT – CAUTION – PRUDENCE
VORSICHT
Abweichungen von den hier angegebenen Verfahren oder Einstellungen
können zu einer gesundheitsgefährdenden Strahlenbelastung führen.
CAUTION
Use of controls or adjustments or performance ofprocedures other than those
specified herein may result in hazardous radiation exposure.
PRUDENCE
L’usage de commandes ou de réglages, ou la réalisation de procédures
autres que ceux spécifiés dans le présent document peuvent exposer l’utilisateur à des
radiations dangereuses.