Bartec MC 92N0ex Series User manual

User Manual - TRANSLATION
Mobile Computer
MC 92N0
ex
series
Type 17-A1A.-…./…….
Type B7-A2A.-…./…….
ATEX/IECEx Zone 1
ATEX/IECEx Zone 2 / 22
UL Class I, II, Division 1 and Class III
UL Class I, II, Division 2 and Class III
Document No.: 11-A1A2-7D0001
Status: 20th March 2019 / Revision B
Reservation: Technical data subject to change without notice. Changes, errors and
misprints may not be used as a basis for any claim for damages.
Contents Page
English 1 – 79
Appendix Declaration of Conformity

Table of Content Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Technical data subject to change without notice..
Revision B / 03/2019
1. Basic Security Information................................................................................................................... 1
1.1 Information on this User Manual....................................................................................... 1
Languages........................................................................................................................ 2
Changes in the document................................................................................................. 2
1.2 Handling the product ........................................................................................................ 2
1.3 Intended use..................................................................................................................... 2
Exclusive purpose ............................................................................................................ 2
Unintended use ................................................................................................................ 3
1.4 Duties of the operator....................................................................................................... 3
1.5 Safety information............................................................................................................. 3
General safety information ............................................................................................... 3
1.6 Maintenance..................................................................................................................... 3
Servicing........................................................................................................................... 3
Inspection......................................................................................................................... 3
Repairs............................................................................................................................. 4
Commissioning................................................................................................................. 4
1.7 Protection type, test certificate and standards.................................................................. 4
1.8 Warranty........................................................................................................................... 4
1.9 Co-applicable documents – Set of documents................................................................. 6
1.10 Definitions......................................................................................................................... 6
1.11 Configuration.................................................................................................................... 7
2. Product Description.............................................................................................................................. 8
2.1 Definition MC 92N0ex-IS Version ...................................................................................... 8
2.2 Definition MC 92N0ex-NI Version...................................................................................... 9
3. Technical Data..................................................................................................................................... 11
3.1 Explosion protection IS................................................................................................... 11
3.2 Explosion protection NI................................................................................................... 12
3.3 Other applicable standards............................................................................................. 14
3.4 Features ......................................................................................................................... 15
Performance features..................................................................................................... 15
Physical features............................................................................................................ 15
User environment........................................................................................................... 18
Application development ................................................................................................ 19
Voice and data transmission Wireless LAN.................................................................... 21
Voice and data transmission Wireless PAN ................................................................... 22
Headset.......................................................................................................................... 22
Barcode capture options................................................................................................. 23
Reading distances.......................................................................................................... 24
Decodable barcode types............................................................................................... 25
RFID Option ................................................................................................................... 25
3.5 Battery............................................................................................................................ 29
3.6 External interfaces.......................................................................................................... 30
3.7 Product labelling............................................................................................................. 31
3.8 Laser labels.................................................................................................................... 33

Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Table of Content
Technical data subject to change without notice.
Revision B / 03/2019
4. Transport and Storage ....................................................................................................................... 34
4.1 Transport........................................................................................................................ 34
4.2 Storage........................................................................................................................... 34
5. Commissioning................................................................................................................................... 35
5.1 Scope of delivery............................................................................................................ 35
Accessories optional....................................................................................................... 35
5.2 Requirements in potentially explosive atmosphere ........................................................ 36
5.3 First steps....................................................................................................................... 37
5.4 Structure......................................................................................................................... 37
5.5 Handling accessories ..................................................................................................... 38
Insert/change battery...................................................................................................... 38
Change keypad .............................................................................................................. 40
Insert SD card................................................................................................................. 43
Remove/replace screen protector .................................................................................. 44
Leather holster ............................................................................................................... 45
Headset.......................................................................................................................... 45
5.6 Connection to a PC ........................................................................................................ 46
Active Sync..................................................................................................................... 46
Windows Mobile Device Center...................................................................................... 46
Android........................................................................................................................... 47
6. Operation............................................................................................................................................. 48
6.1 Final inspection............................................................................................................... 48
6.2 Handling ......................................................................................................................... 48
6.3 Care and cleaning .......................................................................................................... 49
Care................................................................................................................................ 49
Cleaning ......................................................................................................................... 49
Suitable materials........................................................................................................... 50
6.4 Operation recommendations and requirements ............................................................. 51
Basic safety and health protection requirements............................................................ 51
Instructions on the use of Wireless Devices................................................................... 53
Equipment of the laser devices ...................................................................................... 54
LED Devices................................................................................................................... 55
Restrictions to wireless devices...................................................................................... 55
6.5 Frequency of Operation – FCC and IC........................................................................... 56
6.6 Electromagnetic fields .................................................................................................... 58
International.................................................................................................................... 58
Handheld devices........................................................................................................... 59
6.7 Optimise operating times/change energy settings.......................................................... 60
Automatic shutdown in the case of lengthy standby periods.......................................... 60
Change display backlight (increases the operating time of the battery) ......................... 61
Change keypad background lighting (increases the operating time of the battery)........ 62
Switch off radio connections........................................................................................... 63
6.8 Software versions........................................................................................................... 64
OEM ............................................................................................................................... 64
AKU................................................................................................................................ 65
Bluetooth ........................................................................................................................ 66
“Fusion”software............................................................................................................. 67

Table of Content Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
Technical data subject to change without notice..
Revision B / 03/2019
7. Faults and Troubleshooting............................................................................................................... 68
7.1 Resetting the MC 92N0ex................................................................................................ 68
Windows Embedded Handheld and Windows Compact Devices................................... 68
On an Android device..................................................................................................... 71
7.2 USB connection does not work ...................................................................................... 72
8. Service, Inspection, Repair................................................................................................................ 74
8.1 Service intervals............................................................................................................. 74
8.2 Inspection....................................................................................................................... 74
8.3 Service and repair work.................................................................................................. 74
Information on sending in for repairs.............................................................................. 75
9. Disposal............................................................................................................................................... 76
10. Dispatch and Packaging Information................................................................................................ 76
11. Accessories, Spare Parts................................................................................................................... 77
12. Additional Information........................................................................................................................ 79
12.1 Links............................................................................................................................... 79
Appendix: Declaration of Conformity

Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Basic Security Information
Technical data subject to change without notice.
Revision B / 03/2019 1/79
1. Basic Security Information
1.1 Information on this User Manual
Read carefully before putting the devices into operation.
The User Manual is a fixed part of the product. It must be kept in the direct vicinity of the
device and the installation, operating and service staff must have access to it at all times.
The User Manual contains important information, safety instructions and test certificates
which are necessary for the perfect function of the device in operation.
The User Manual is directed at all individuals concerned with the assembly, installation,
commissioning and servicing of the product. The applicable guidelines and standards for
areas with gas and dust atmosphere (99/92/EC, EN 60079-17, EN 60079-19,
IEC 60079-17, IEC 60079-19) must be observed when conducting this work.
Knowledge of the safety and warning information in this User Manual and the strict
compliance with it is essential for safe installation and commissioning. Accidents, injuries
and material damage can be avoided by
circumspect handling and systematically
following the instructions.
The figures in this User Manual serve to illustrate the information and descriptions. They
are not necessarily completely transferrable and may differ slightly from the actual
execution of the device.
The BARTEC company reserves the right to carry out technical changes at any time.
In no event will BARTEC company be responsible or liable for indirect or consequential
damages resulting from the use or application of this user manual.
Safety and warning information is particularly emphasised in this User Manual and marked
by symbols.
DANGER
DANGER describes a directly imminent danger.
If not avoided, death or severe injury
will be the consequence.
WARNING
WARNING describes a possibly imminent danger. If not avoided, death or severe
injury
may be the consequence.
CAUTION
CAUTION describes a possibly imminent danger. If not avoided, mild or slight injury may
be the consequence.

Basic Security Information Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
2/78 Technical data subject to change without notice..
Revision B / 03/2019
ATTENTION
ATTENTION describes a possibly damaging situation. If not avoided, the plant or objects
in its vicinity may be damaged.
Important information on effective, economic & environmentally compliant handling.
Languages
The original User Manual is written in German. All other available languages are translations
of the original User Manual.
The User Manual is available in German and English. If further languages are required,
these must be requested from BARTEC or stated on placing an order.
Changes in the document
BARTEC reserves the right to change the content of this document without notification. No
warranty is assumed for the correctness of the information. In cases of doubt, the German
safety instructions apply because it is not possible to rule out errors of translation or printing.
In the case of legal disputes, the “General Terms and Conditions of Business” of the
BARTEC Group also apply.
The current versions of the datasheets, operating instructions, certificates and EC
declarations of conformity can be downloaded from https://www.bartec.de/en/ under
Products and Solutions in the product area “Automation & Enterprise Mobility”3 or on
support&download page from http://automation.bartec.de/indexE.htm or may be
requested directly from BARTEC GmbH.
1.2 Handling the product
The product described in this User Manual left the factory in a perfect and tested state in
terms of safety. To maintain this state and to achieve a perfect and safe operation of this
product, it may only be operated in the manner described by the manufacturer. In addition,
the perfect and safe operation of this product requires correct transportation, proper storage
and careful operation.
The safe and perfect handling of the Mobile Computer is a prerequisite for its perfect and
correct functioning.
1.3 Intended use
Exclusive purpose
The Mobile Computer MC 92N0ex is a handheld piece of electrical equipment. It serves the
purpose of the mobile recording, processing and radio transmission of data within
potentially explosive atmospheres.
It is used exclusively in combination with devices which comply with the requirements
placed on the overvoltage category I.
The admissible operating data of the device used must be considered.

Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Basic Security Information
Technical data subject to change without notice.
Revision B / 03/2019 3/79
Unintended use
Any other use is unintended and may lead to damage and accidents. The manufacturer
shall not be liable for any use extending beyond the exclusive purpose.
1.4 Duties of the operator
The operator undertakes to only permit persons to work with the Mobile Computers who
are acquainted with the basic regulations on safety and accident prevention, and who
have been inducted in the use of the Mobile Computer;
have read and understood the documentation, the safety chapter and the warnings.
The operator checks that the safety and accident prevention regulations applicable to the
respective case of use have been observed.
1.5 Safety information
General safety information
Do not dry wipe or clean devices in potentially explosive atmospheres!
Do not open devices in potentially explosive atmospheres.
General statutory provisions or guidelines on occupational health and safety, accident
prevention provisions and environmental protection laws must be heeded, e.g.
German Industrial Health and Safety Ordinance (BetrSichV) and nationally applicable
ordinances.
Use suitable clothing and shoes with respect to the danger of hazardous electrostatic
charges.
Avoid heat influences outside the specified temperature range.
Protect device from external influences! Do not expose device to caustic/aggressive
liquids, vapours or spray. In the case of malfunction or damaged enclosure, remove
the device immediately from the potentially explosive atmosphere and bring it to a
safe place.
1.6 Maintenance
The pertinent erection and operating provisions for electrical systems must be observed!
(e.g. Directive 99/92/EC, Directive 94/9/EC, BetrSichV and nationally applicable ordinances
EN 60079-14, IEC 60079-14 and the series DIN VDE 0100)!
Observe the national waste disposal regulations when disposing of the devices.
Servicing
No constant servicing will be necessary if operated correctly under consideration of the user
manual and environmental conditions. See Chapter “Service, inspection, repair” in this
respect.
Inspection
According to EN 60079-17, IEC 60079-17, EN 60079-19 and IEC 60079-19, the operator
of electrical systems in potentially explosive atmospheres is obliged to have these inspected
by an electrician to ensure correct condition.

Basic Security Information Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
4/78 Technical data subject to change without notice..
Revision B / 03/2019
Repairs
Repairs to explosion-protected devices may only be performed by authorised personnel
with original spare parts and according to the state of the art. The applicable provisions
must be observed in this respect.
Commissioning
It must be checked that all components and documents are available before commissioning.
1.7 Protection type, test certificate and standards
Labels on explosion protection and the test certificate are attached to the device. See
Chapter 3 “Technical data” with respect to labelling.
The guidelines and standards applicable to the Mobile Computer for devices and protected
systems for intended use in potentially explosive atmospheres are provided in Chapter 3
“Technical data”.
1.8 Warranty
WARNING
No changes or conversions may be made without the manufacturer’s written
consent.
If components other than those specified are used, explosion protection will no longer
be assured. It cannot be guaranteed that parts procured from other suppliers have been
designed and manufactured in conformance to safety requirements and with the
necessary stress tolerance.
Contact the manufacturer and obtain his approval before performing any changes
or retrofits. Use only original spare and expendable parts.
The manufacturer shall exclusively assume the complete warranty only
for spare parts
ordered from him.
Our “General Terms and Conditions of Sale and Delivery” shall apply in principle. These
shall be made available to the operator on signing of contract at the latest. Warranty and
liability claims in the case of injury and damage to property shall be excluded if they are
attributable to one or several of the following causes:

Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Basic Security Information
Technical data subject to change without notice.
Revision B / 03/2019 5/79
Unintended use of the Mobile Computers.
−Incorrect assembly, commissioning, operation and servicing.
−Failure to observe the information in the User Manual with respect to transport, storage,
assembly, installation, commissioning, operation and service.
−Independent structural changes.
−Faulty monitoring of parts subject to wear and tear.
−Incorrectly performed repairs.
−Cases of disaster through the impact of foreign bodies and force majeure.
We grant a warranty period of one year starting from the date of delivery from the Bad
Mergentheim factory on the Mobile Computers and their accessories (exception: battery 6
months). This warranty covers all parts of the delivery and shall be restricted to the free
replacement or repair of the defective parts in our Bad Mergentheim factory. For this
purpose, any packaging supplied must be kept where possible. In the case of warranty, the
goods must be returned to us after written agreement. There shall be no claim to repair at
the sight of erection.
The versions, components, monitors and windows shown in this User Manual are merely
examples and may deviate from the actual display.
The information contained herein refers to the explosion-protected version of series
MC 92N0ex.
This User Manual contains all important information on the subject of explosion protection.
The original user manuals and product information of ZEBRA with information on handling
and commissioning are also available. In the case of overlaps, the information in this User
Manual shall take priority and shall supersede the information from ZEBRA.

Basic Security Information Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
6/78 Technical data subject to change without notice..
Revision B / 03/2019
1.9 Co-applicable documents – Set of documents
BARTEC
−User Manual to the Mobile Computer series MC 92N0ex – The use of the explosion-
protected version of the Mobile Computer series MC 92N0ex is described in this User
Manual.
−Technical datasheet for the explosion-protected version of the Mobile Computer series
MC 92N0ex – This technical datasheet contains the most important explosion-relevant
technical data as well as general technical data.
ZEBRA
The set of documentation of the MC9200 contains information on the respective user
requirements and covers the following:
−Quick Start Guide for the MC9200 – The commissioning of the Mobile Computer
MC9200 is described in this User Manual.
−User Manual for the MC92N0 – The functional use of the Mobile Computer MC MC9200
is described in this User Manual.
−Integration Manual for the MC9200 – The setting up of the Mobile Computer MC9200
including accessories is described in this User Manual.
1.10 Definitions
Some abbreviations are used in the documentation.
IS = Intrinsically Safe / Intrinsic Safety =>
is used as an umbrella term for Zone 1 and Division 1 versions
NI = Non-Incendive / non-sparking =>
is used as an umbrella term for Zone 2 and Division 2 versions
MC 92N0ex = Stands for the entire explosion-proof product series.

Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Basic Security Information
Technical data subject to change without notice.
Revision B / 03/2019 7/79
1.11 Configuration
This Manual refers to the following configurations:
Configuration
Version
Wireless

WLAN:
WIN CE/WEH: 802.11 a/b/g/n/d/h/i
Android: 802.11 a/b/g/n/d/h/i/k/r
WPAN:
WIN CE/WEH:
Microsoft-Stack: Bluetooth 2.1 EDR
Stonestreet-Stack: Bluetooth 4.0 plus BLE or WBA
Android: Bluetooth 4.0 BLE
Optional RFID
options RFID-LF 125 kHz / 134 kHz
(Low Frequency)
RFID-HF 13,56 MHz
(High Frequency)
RFID-UHF (EU) 865,6 to 867,5 MHZ
(Ultra High Frequency)
RFID-UHF (US) 902 to 928 MHz
(Ultra High Frequency)
Display
VGA Color Display (3.7")
Memory
1 GB RAM / 2 GB Flash Memory
Scanner
options 1D-Laser Scanner Normal Range
1D-Laser Scanner Long Range
1D-/2D-Imager
1D-/2D-Imager Middle Range (only NI-version)
1D-/2D-Long Range Imager (only NI-version)
1D-/2D-Imager DPM (Direct Part Marking)
Operating
system options
Windows WEH 6.5.3
Windows CE 7.0
Android 4.4.4
Keypad
options 28 Keypad (Numeric keys can be used direct, Alpha keys and other
key functions can be used via function keys)
43 Keypad (Numeric- and function keys can be used direct, alpha
keys and other key functions can be used via function keys)
53 Keypad (Numeric- and alpha keys cen be used direct, other key
functions can be used via function keys)
53 Keypad with layout for VT Emulation
The Emulation software is not part of the device.
Other specific information on the keypad is provided under Technical Data or in the
ZEBRA documentation.

Product Description Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
8/78 Technical data subject to change without notice..
Revision B / 03/2019
2. Product Description
2.1 Definition MC 92N0ex-IS Version
The MC 92N0ex-IS Mobile Computer is a robust mobile computer designed for industrial
use and has been specially modified by BARTEC for use in hazardous (potentially
explosive) areas in
−ATEX/IECEx Zone 1
−UL Class I, II Division 1 and Class III
This means that the extensive communication and data acquisition options which are
already standard in other areas are available to the user in hazardous areas also.
Its ergonomic design and easy operation make it an ideal support in the attainment of fast
data availability in enterprise processes. Various versions of keypad are available for
manual data capture.
Other data capture options are provided by the integrated 1D or 1D/2D scan engine for
capturing barcodes and various optional RFID readers.
The ergonomically mounted scan triggers on the MC 92N0ex-IS allow data to be captured
easily in one-hand operation. Several technologies are available for data communication
with other systems and company divisions.
−Wireless LAN (WLAN),
−Wireless PAN (WPAN) (Bluetooth)
−Ethernet or USB connection through docking station

Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Product Description
Technical data subject to change without notice.
Revision B / 03/2019 9/79
These modules, which are integrated in the device, allow a seamless transmission of voice
and data into the company’s network.
Other advantages in use are its sturdy construction, easy-to-read 3.7'' VGA colour display
with touch technology and highly efficient lithium-ion battery.
A 1 GHz dual-core processor in the MC 92N0ex-IS ensures fast process execution. Easy
application development is facilitated by the operating systems, Microsoft Windows WEH
6.5.3, CE 7.0 and Android 4.4.4 in conjunction with the Enterprise Mobility Developer Kits
(EMDK) or the additional Mobility DNA solutions from ZEBRA.
1 GB RAM and 2 GB flash memory are integrated in the device for storing user-defined
applications and data. For larger applications and volumes of data, BARTEC offers SD
memory cards.
2.2 Definition MC 92N0ex-NI Version
The MC 92N0ex-NI Mobile Computer is a robust mobile computer designed for industrial
use and has been specially modified by BARTEC for use in hazardous (potentially
explosive) areas in
−ATEX/IECEx Zone 2 / 22
−UL Class I, II Division 2 and Class III
This means that the extensive communication and data acquisition options which are
already standard in other areas are available to the user in hazardous areas also.

Product Description Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
10/78 Technical data subject to change without notice..
Revision B / 03/2019
Its ergonomic design and easy operation make it an ideal support in the attainment of fast
data availability in enterprise processes. Various versions of keypad are available for
manual data capture.
Other data capture options are provided by the integrated 1D or 1D/2D scan engine for
capturing barcodes and various optional RFID readers.
The ergonomically mounted scan triggers on the MC 92N0ex-NI allow data to be captured
easily in one-hand operation. Several technologies are available for data communication
with other systems and company divisions.
−Wireless LAN (WLAN),
−Wireless PAN (WPAN) (Bluetooth)
−Ethernet or USB connection through docking station
These modules, which are integrated in the device, allow a seamless transmission of voice
and data into the company’s network.
Other advantages in use are its sturdy construction, easy-to-read 3.7'' VGA colour display
with touch technology and highly efficient lithium-ion battery.
A 1 GHz dual-core processor in the MC 92N0ex-IS ensures fast process execution. Easy
application development is facilitated by the operating systems, Microsoft Windows WEH
6.5.3, CE 7.0 and Android 4.4.4 in conjunction with the Enterprise Mobility Developer Kits
(EMDK) or the additional Mobility DNA solutions from ZEBRA.
1 GB RAM and 2 GB flash memory are integrated in the device for storing user-defined
applications and data. For larger applications and volumes of data, BARTEC offers SD
memory cards.

Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Technical Data
Technical data subject to change without notice.
Revision B / 03/2019 11/79
3. Technical Data
3.1 Explosion protection IS
ATEX Zone 1
Type
17-A1A3-0…/S……
17-A1A3-R..1/S…….
17-A1A3-R..3/S…….
17-A1A3-R..A/S…….
17-A1A3-R..B/S…….
MC 92N0ex-IS
MC 92N0ex-IS RFID
Ex protection
II 2G Ex q [ib] IIC T4 Gb
Type 17-A1A3-R..C/S…….
17-A1A3-R..D/S…….
MC 92N0
ex
-IS RFID
Ex protection
II 2G Ex q [ib] IIB T4 Gb
Certificate
PTB 13 ATEX 2019 X
Standards
EN 60079-0:2012
EN 60079-5:2007
EN 60079-11:2012
IECEx Zone 1
Type
17-A1A3-0…/S…….
17-A1A3-R..1/S…….
17-A1A3-R..3/S…….
17-A1A3-R..A/S…….
17-A1A3-R..B/S…….
MC 92N0ex-IS
MC 92N0ex-IS RFID
Ex protection
Ex q [ib] IIC T4 Gb
Type 17-A1A3-R..C/S…….
17-A1A3-R..D/S…….
MC 92N0
ex
-IS RFID
Ex protection
Ex q [ib] IIB T4 Gb
Certificate
IECEx PTB 13.0043X
Standards
IEC 60079-0:2011 Edition 6
IEC 60079-5:2007 Edition 3
IEC 60079-11:2011 Edition 6
ATEX and IECEx Directives
ATEX 2014/34/EU
EMV 2014/30/EU
RED 2014/53/EU
RoHS 2011/65/EU
Product labelling
0044

Technical Data Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
12/78 Technical data subject to change without notice..
Revision B / 03/2019
UL Class I, II, III Division 1
Type 17-A1A2-0…/S…….
17-A1A2-R…/S…….
MC 92N0
ex
-IS
MC 92N0ex-IS RFID
Ex protection
Class I Division 1 Groups C and D
Class II Division 1 Groups F and G
Class III
Certificate USA and Canada
E226123
Standards
USA Standard UL 913, 5 Edition.
National Standard of Canada C22.2 No. 157-92
3.2 Explosion protection NI
ATEX Zone 2/22
Type B7-A2A.-0.A0/S…….
B7-A2A.-0.J0/S…….
B7-A2A.-0.30/S…….
B7-A2A.-0.50/S…….
B7-A2A.-0.90/S…….
MC 92N0
ex
-NI
Ex protection
II 3G Ex ic IIC T6 Gc
II 3D Ex ic IIIB T80°C Dc IP64
-20 °C ≤ Ta ≤ +50 °C
Type B7-A2A.-0.L0/S…….
B7-A2A.-0.M0/S…….
B7-A2A.-R..1/S…….
B7-A2A.-R..3/S…….
B7-A2A.-R..A/S…….
B7-A2A.-R..B/S…….
MC 92N0
ex
-NI
MC 92N0ex-NI RFID
Ex protection
II 3G Ex ic IIC T4 Gc
II 3D Ex ic IIIB T80°C Dc IP64
-20 °C ≤ Ta ≤ +50 °C
Typ
B7-A2A.-R..C/S…….
B7-A2A.-R..D/S…….
MC 92N0ex-NI RFID
Kennzeichnung
II 3G Ex ic IIB T4 Gc
II 3D Ex ic IIIB T80°C Dc IP64
-20 °C ≤ Ta ≤ +50 °C
Certificate
EPS 14 ATEX 1 782 X
Standards
EN 60079-0: 2012 + A11:2013
EN 60079-11:2012

Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-………… Technical Data
Technical data subject to change without notice.
Revision B / 03/2019 13/79
IECEx Zone 2/22
Type B7-A2A.-0.A0/S…….
B7-A2A.-0.J0/S…….
B7-A2A.-0.30/S…….
B7-A2A.-0.50/S…….
B7-A2A.-0.90/S…….
MC 92N0
ex
-NI
Ex protection
Ex ic IIC T6 Gc
Ex ic IIIB T80°C Dc IP64
Type B7-A2A.-0.L0/S…….
B7-A2A.-0.M0/S…….
B7-A2A.-R..1/S…….
B7-A2A.-R..3/S…….
B7-A2A.-R..A/S…….
B7-A2A.-R..B/S…….
MC 92N0
ex
-NI
MC 92N0ex-NI RFID
Ex protection
Ex ic IIC T4 Gc
Ex ic IIIB T80°C Dc IP64
Typ B7-A2A.-R..C/S…….
B7-A2A.-R..D/S…….
MC 92N0
ex
-NI RFID
Kennzeichnung
Ex ic IIB T4 Gc
Ex ic IIIB T80°C Dc IP64
Certificate
IECEx EPS 14.0100X
Standards
IEC 60079-0:2011
IEC 60079-11:2011
ATEX and IECEx Directives
ATEX 94/9/EG
EMV 2004/108/EG
R&TTE 1999/5/EG
RoHS 2002/95/EG
Product labelling

Technical Data Mobile Computer MC 92N0ex
Type 17-A1A.-………… and Type B7-A2A.-…………
14/78 Technical data subject to change without notice..
Revision B / 03/2019
UL Class I, II, III Division 2
Type B7-A2A4-0…/S…….
B7-A2A4-R…/S…….
MC 92N0
ex
-NI
MC 92N0ex-NI RFID
Ex protection
Class I Division 2 Groups A, B, C and D
Class II Division 2 Groups F and G
Class III
Certificate USA and Canada
E321557
Standards
ANSI/ISA 12.12.01, UL 60950,
Canada National Standard
CSA C22.2 Nr. 213-M1987
CAN/CSA C22.2 Nr. 157-92
3.3 Other applicable standards
See chapter: EU EU Certificate of Conformity