Bartec Agile S NI User manual

Agile S NI
Quick Start Guide
10.1” Industry Tablet PC
B1-A2B0-7E0001-02/2020-EM-435539

BARTEC GmbH
Max-Eyth-Straße 16
Fon:[phone]
Support:
[e-mail]
97980 Bad Mergentheim
Fax: [phone]
Download:
http://automation.bartec.de
GERMANY
Internet:
www.bartec.com
Quick start guide - Translation
Agile S NI
10.1" Tablet PC
Type B7-A2B.-.…/…….
ATEX / IECEx Zone 2 / 22
Class I Division 2
Document No.: B1-A2B0-7E0001
Status: February 2020
Proviso:
Subject to technical changes. Changes, mistakes and printing errors do
not substantiate any claim to damages.
Content Pages
English 1-20

Table of content Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/……..
Subject to technical changes.
02/2020
1. Basic safety information ...................................................................................................................... 1
1.1 Information on this Quick Start Guide............................................................................... 1
1.1.1 Languages........................................................................................................................ 2
1.1.2 Changes in the document................................................................................................. 2
1.1.3Registered trademarks ..................................................................................................... 2
1.2 Handling the product ........................................................................................................ 2
1.3 Intended use..................................................................................................................... 3
1.3.1 Exclusive purpose ............................................................................................................ 3
1.3.2 Unintended use ................................................................................................................ 3
1.4 Duties of the operator....................................................................................................... 3
1.5 Safety information............................................................................................................. 3
1.6 Maintenance..................................................................................................................... 4
1.6.1 Servicing........................................................................................................................... 4
1.6.2 Inspection......................................................................................................................... 4
1.6.3 Repairs............................................................................................................................. 4
1.6.4 Commissioning................................................................................................................. 4
1.7 Labelling, test certificate, and standards .......................................................................... 4
1.8 Warranty........................................................................................................................... 5
1.9 Co-applicable documents - set of documents................................................................... 6
1.10 Definition of terms............................................................................................................. 6
1.11 Configuration.................................................................................................................... 7
2. Product description.............................................................................................................................. 8
2.1 Agile S NI.......................................................................................................................... 8
2.2 Purpose of use ................................................................................................................. 8
3. Technical data....................................................................................................................................... 9
3.1 Explosion protection......................................................................................................... 9
3.2 Applicable standards...................................................................................................... 10
3.2.1 User environment........................................................................................................... 10
3.2.2 Headset.......................................................................................................................... 10
3.3 Battery............................................................................................................................ 11
3.4 Product labelling............................................................................................................. 12
4. Transport and storage........................................................................................................................ 14
4.1 Transport........................................................................................................................ 14
4.2 Storage........................................................................................................................... 14
5. Commissioning................................................................................................................................... 15
5.1 Requirements in potentially explosive atmosphere ........................................................ 15
5.2 Handling accessories ..................................................................................................... 16
6. Disposal............................................................................................................................................... 17
7. EU Declaration of Conformity............................................................................................................ 18

Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/…….. Basic safety information
Subject to technical changes.
02/2020 1/20
1. Basic safety information
1.1 Information on this Quick Start Guide
Read carefully before putting the devices into operation.
The Quick Start Guide is a fixed part of the product. It must be kept in the direct vicinity of
the device and the installation, operating and service staff must have access to it at all
times.
The Quick Start Guide contains important information, safety instructions and test
certificates which are necessary for the perfect function of the device in operation.
The Quick Start Guide
is directed at all individuals concerned with the commissioning,
handling and servicing of the product. The applicable guidelines and standards for areas
with gas and dust atmosphere (EN/IEC 60079-17, EN/IEC 60079-19) must be observed
when conducting this work.
Knowledge of the safety and warning information in this Quick Start Guide and the strict
compliance with it is essential for safe installation and commissioning. Accidents, injuries
and material damage can be avoided by circumspect handling and systematically
following the instructions.
The examples, tables, and figures provided in this Quick Start Guide
are for illustration
purposes. Due to
the different requirements of the respective application, the BARTEC
company cannot assume responsibility or liability for actual use based on the examples
and figures.
The BARTEC company reserves the right to carry out technical changes at any time.
In no
event will BARTEC company be responsible or liable for indirect or consequential
damages resulting from the use or application of this Quick Start Guide.
Safety and warning information is particularly emphasised in this Quick Start Guide and
marked by symbols.
DANGER
DANGER
describes a directly imminent danger. If not avoided, death or severe injury
will be the consequence.
WARNING
WARNING
describes a possibly imminent danger. If not avoided, death or severe injury
may be the consequence.
CAUTION
CAUTION describes a possibly imminent danger. If not avoided, mild or slight injury may
be the consequence.
ATTENTION
ATTENTION describes a possibly damaging situation. If not avoided, the plant or
objects in its vicinity may be damaged.
Important information on effective, economical & environmentally compliant handling.

Basic safety information Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/……..
2/20 Subject to technical changes.
02/2020
1.1.1 Languages
The original Quick Start Guide with safety information is written in German. All other
available languages are translations of the original Quick Start Guide.
The Quick Start Guide is available in German and English. If further languages are required,
these must be requested from BARTEC or stated on placing an order.
1.1.2 Changes in the document
BARTEC reserves the right to change the content of this document without notification. No
warranty is assumed for the correctness of the information. In cases of doubt, the German
safety instructions apply because it is not possible to rule out errors of translation or printing.
In the case of legal disputes, the “General Terms and Conditions of Business” of the
BARTEC Group also apply.
The current versions of the datasheets, user manual, certificates and EU declarations of
conformity can be downloaded from www.bartec.com or may be requested directly from
BARTEC GmbH.
1.1.3 Registered trademarks
Intel® is a registered trademark of Intel Corporation
Bluetooth® is a registered trademark of Bluetooth Special Interest Group
WINDOWS is a registered trademark of MICROSOFT Corporation
1.2 Handling the product
The product described in this Quick Start Guide left the factory in a perfect and tested state
in terms of safety. To maintain this state and to achieve a perfect and safe operation of this
product, it may only be operated in the manner described by the manufacturer. In addition,
the perfect and safe operation of this product requires correct transportation, proper storage
and careful operation.
The safe and perfect handling of the tablet PC is a prerequisite for its perfect and correct
functioning.

Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/…….. Basic safety information
Subject to technical changes.
02/2020 3/20
1.3 Intended use
1.3.1 Exclusive purpose
The tablet PC series is a handheld piece of electrical equipment. It serves the purpose of
the mobile recording, processing and/or radio transmission of data within potentially
explosive atmospheres.
It is used exclusively in combination with devices which comply with the requirements
placed on the overvoltage category I.
The admissible operating data of the device used must be considered.
1.3.2 Unintended use
Any other use is unintended and may lead to damage and accidents. The manufacturer
shall not be liable for any use extending beyond the exclusive purpose.
1.4 Duties of the operator
The operator undertakes to only permit persons to work with the tablet PC who
are acquainted with the basic regulations on safety and accident prevention, and who
have been inducted in the use of the tablet PC,
have read and understood the documentation, the safety chapter and the warnings.
The operator checks that the safety and accident prevention regulations applicable to the
respective case of use have been observed.
1.5 Safety information
Do not dry wipe or clean devices in potentially explosive atmospheres!
Do not open devices in potentially explosive atmospheres.
Do not replace or charge battery in potentially explosive atmospheres.
General statutory provisions or guidelines on occupational health and safety, accident
prevention provisions and environmental protection laws must be heeded, e.g.
Operational Safety Ordinance (BetrSichV) and nationally applicable ordinances.
Use suitable clothing and shoes with respect to the danger of hazardous electrostatic
charges.
Avoid heat influences outside the specified temperature range.
Protect device from external influences! Do not expose device to caustic/aggressive
liquids, vapours or spray. In the case of malfunction or damaged enclosure, remove
the device immediately from the potentially explosive atmosphere and bring it to a safe
place.

Basic safety information Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/……..
4/20 Subject to technical changes.
02/2020
1.6 Maintenance
The pertinent erection and operating provisions for electrical systems must be observed!
(e.g. Directive 2014/34/EU, BetrSichV and nationally applicable ordinances
EN/IEC 60079-14 and the series DIN VDE 0100)!
Observe the national waste disposal regulations when disposing of the devices.
1.6.1 Servicing
No constant servicing will be necessary if operated correctly under consideration of the
assembly instructions and environmental conditions. See Chapter “Service, inspection,
repair” in this respect.
1.6.2 Inspection
According to EN/IEC 60079-17 and EN/IEC 60079-19 the operator of electrical systems in
potentially explosive atmospheres is obliged to have these inspected by an electrician to
ensure correct condition.
1.6.3 Repairs
Repairs to explosion-protected devices may only be performed by authorised personnel
with original spare parts and according to the state of the art. The applicable provisions
must be observed in this respect.
1.6.4 Commissioning
It must be checked that all components and documents are available before commissioning.
1.7 Labelling, test certificate, and standards
Labels on explosion protection and the test certificate are attached to the tablet PC. See
Chapter 3 “Technical data” with respect to labelling.
The guidelines and standards applicable to the tablet PC for devices and protected systems
for intended use in potentially explosive atmospheres are provided in Chapter 3 “Technical
data”.

Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/…….. Basic safety information
Subject to technical changes.
02/2020 5/20
1.8 Warranty
WARNING
No changes or retrofits may be made without the written consent of the
manufacturer.
If non-
specified components are used, the explosion protection will no longer be
guaranteed. In the case of externally procured parts, it is not guaranteed that these have
been designed and manufactured in accordance with their load and requisite safety.
Contact the manufacturer before any changes or retrofits to receive a release.
Only use original spare and wearing parts.
The manufacturer shall
exclusively assume the complete warranty only for spare parts
ordered from him.
Our “General Terms and Conditions of Sale and Delivery” shall apply in principle. These
shall be made available to the operator on signing of contract at the latest. Warranty and
liability claims in the case of injury and damage to property shall be excluded if they are
attributable to one or several of the following causes:
Unintended use of the tablet PC.
Incorrect handling
Failure to observe the information in the Quick Start Guide and the user manual with
respect to transport, storage, commissioning, operation and service.
Independent structural changes
Faulty monitoring of parts subject to wear and tear.
Incorrectly performed repairs.
Cases of disaster through the impact of foreign bodies and force majeure.
We grant a warranty period of one year starting from the date of delivery from the Bad
Mergentheim factory on the tablet PCs (exception: battery 6 months). The warranty period
for accessories is one year starting from the date of delivery from the Bad Mergentheim
factory. This warranty covers all parts of the delivery and shall be restricted to the free
replacement or repair of the defective parts in our Bad Mergentheim factory. For this
purpose, any packaging supplied must be kept where possible. In the case of warranty, the
goods must be returned to us after written agreement using an RMA form. There shall be
no claim to repair at the sight of erection.
The information contained herein refers to the explosion-protected version of the tablet PC
series Agile S NI.
This Quick Start Guide contains all important information on the subject of explosion
protection. The user manual and further product information on handling and
commissioning are similarly available.

Basic safety information Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/……..
6/20 Subject to technical changes.
02/2020
1.9 Co-applicable documents - set of documents
Quick Start Guide for the Tablet PC Agile S NI
The safety relevant information, initial use and further data of the tablet PC Agile S NI
are described in this Quick Start Guide.
User manual for the Tablet PC Agile S NI
The use, commissioning and settings of the tablet PC Agile S NI are described in this
user manual.
Data sheet for the Tablet PC Agile S NI
This technical data sheet contains the most important explosion-relevant technical data
as well as general technical data.
1.10 Definition of terms
A few abbreviations are used in the documentation.
NI = Non Incendive =>
is used as generic term for Zone 2 and Division 2 version
= stands for the entire product series

Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/…….. Basic safety information
Subject to technical changes.
02/2020 7/20
1.11 Configuration
The devices are only supplied with preinstalled operating system.
Customer software or further applications are not contained in the delivery.
This Quick Start Guide refers to the following configurations:
Configuration
Version
Processor
Intel Core i5-7200U Kaby lake 2.5 GHz
(turbo to 3.1 GHz)
Display
10.1" with 1920 x 1200 Pixel resolution
Memory
8 GB
Mass storage
256 GB
Operating system
Windows 10 IoT Enterprise CBB – 64 Bit
MUI (Multilingual)
WLAN
IEEE 802.11 a/b/g/n/ac
Bluetooth
5.0
WWAN
(optional)
4G/LTE module with European frequencies
and North American frequencies
GPS
u-Blox Neo-M8 with an accuracy of 2.5 m
(prepared for Galileo GPS System)
Scanner Options
(optional)
1D/2D Imager
RFID-Reader
HF/NFC
13.56 MHz
ISO 15693
ISO 14443-A
ISO 18092

Product description Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/……..
8/20 Subject to technical changes.
02/2020
2. Product description
2.1 Agile S NI
The Agile S NI is a tough tablet PC with 10.1" display, which has been designed for use in
the industrial environments and especially developed by BARTEC for use in potentially
explosive atmospheres.
2.2 Purpose of use
The tablet PCs Agile S NI are handheld electrical devices. They serve the purpose of entry,
processing and (radio) transmission of data within potentially explosive atmospheres.
The tablet PC Agile S NI is used exclusively in combination with devices which comply with
the requirements placed on the overvoltage category I.
The tablet PCs, Type B7-A2B.-…./…….. have been modified for use in the following
potentially explosive atmospheres:
ATEX/IECEx Zone 2 and Zone 22
Class I, Division 2, Groups A, B, C and D, T4A

Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/…….. Technical data
Subject to technical changes.
02/2020 9/20
3. Technical data
3.1 Explosion protection
ATEX Zone 2 and Zone 22
Type B7-A2B3-.…/……..
B7-A2B4-.…/……..
Agile S NI
Labelling
II 3G Ex ic IIC T4 Gc
II 3D Ex ic IIIB T130°C Dc IP64
-20 °C ≤ Ta ≤ +50 °C
Test certificate
EPS 19 ATEX 1 179 X
Standards
See chapter: EU Declaration of Conformity
IECEx Zone 2 and Zone 22
Type B7-A2B3-.…/……..
B7-A2B4-.…/……..
Agile S NI
Labelling
Ex ic IIC T4 Gc
Ex ic IIIB T130°C Dc IP64
-20 °C ≤ Ta ≤ +50 °C
Test certificate
IECEx EPS 19.0079X
Standards
See chapter: EU Declaration of Conformity
Class I Division 2
Type B7-A2B2-.…/……..
B7-A2B4-.…/……..
Agile S NI
Labelling
Class I, Division 2, Groups A, B, C and D, T4A
Test certificate USA and Canada
CSA file 180267
Standards
ANSI/ISA 12.12.01 and
CAN/CSA C22.2 No. 213-M1987
X - labelling (special conditions of use for secure operation within the potentially
explosive atmosphere)
The ambient temperature range is -20 °C ≤ Ta ≤ +50 °C.*
The device must be protected from impact with high impact energy, from intense UV-
irradiation, and strongly charge generating processes.
It is not allowed to use connectors inside the potentially explosive atmosphere.*
It is not allowed to remove, change and/or charge the battery inside
the potentially
explosive atmosphere.*
It is not allowed to operate the camera's flash (LED) as a continuous light inside the
potentially explosive atmosphere.*
The battery must be locked within the potentially explosive atmosphere.*
*See individual chapter on the points.

Technical data Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/……..
10/20 Subject to technical changes.
02/2020
3.2 Applicable standards
3.2.1 User environment
Operating temperature
ATEX/IECEx Zone 2 / 22
EPS 19 ATEX 1 179 X
-20 °C to +50 °C
(-4 °F to +122 °F)
Operating temperature
Class I Division 2
CSA file 180267
-10 °C to +50 °C
(14 °F to +122 °F)
Charging temperature
0 °C to +45 °C
(+32 °F to +113 °F)
Storage temperature
(without battery)
-30 °C to +60 °C
(-22 °F to +140 °F)
Relative humidity
10 % to 90 % (non-condensing)
Class of protection (IEC 60529)
IP 65
3.2.2 Headset
DANGER
Non-certified accessories endanger explosion protection.
Danger to life in a potentially explosive atmosphere!
Only use the headset connection outside the potentially explosive atmosphere!

Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/…….. Technical data
Subject to technical changes.
02/2020 11/20
3.3 Battery
The life of the battery will depend on different use factors and the device settings, e.g.:
Use and setting of WLAN/Bluetooth
Background lighting/screensaver
The settings in power management
Use and setting of 1D/2D Imager
Use and setting of 4G/LTE module
Use and setting of RFID module
Use and setting of the camera
Battery
Type B7-A2Z0-0055
Lithium polymer battery
7.4 V / 5140 mAh
(only replaceable and rechargeable in safe
range)
Operating temperature
During charging
0 °C to +45 °C
(+32 °F to 113 °F)
During discharging in
potentially explosive
atmosphere
-20 °C to +50 °C
(-4 °F to 122 °F)

During discharging in safe
atmosphere
-20 °C to +60 °C
(-4 °F to 140 °F)
Storage temperature
-20 °C to +50 °C
(-4 °F to 122 °F)
Relative humidity
10 %-90 % (non condensing)
Lifecycle
≥ 300
Battery performance
Up to 8 hours
Battery performance depends on device
settings.
Backup battery with Hot Swap
functions
7.4 V / 330 mAh
Integrated in the device and only replaceable in
the factory.

Technical data Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/……..
12/20 Subject to technical changes.
02/2020
3.4 Product labelling
Serial number
RFID
Laser warning
Only for
devices with
integrated
1D/2D Imager
Microsoft
Windows
Licence
Type label
SIM card slot

Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/…….. Technical data
Subject to technical changes.
02/2020 13/20
Battery, type B7-A2Z0-0055
Front side
Rear side

Transport and storage Agile S NI - 10.1" Tablet PC
Type B7-A2B.-.…/……..
14/20 Subject to technical changes.
02/2020
4. Transport and storage
4.1 Transport
Report any transport damage or incomplete deliveries immediately after receipt in writing
to the forwarding company and BARTEC GmbH.
Any damage caused through incorrect storage shall not be
covered by the warranty
provisions of BARTEC GmbH.
4.2 Storage
ATTENTION
Property damage through incorrect storage!
Observe storage temperatures.
Keep humidity away from the tablet PC.
Additional information on the batteries
The batteries of BARTEC (type B7-A2Z0-0055) are developed and manufactured in
accordance with the highest industrial standards. The operating time or storage period of a
battery is restricted, however. The actual life of a battery is influenced by different factors,
e.g. hot, cold, rough operating environment and falling from a great height. If a battery is
kept longer than six months, the performance may be impaired on a permanent basis. Keep
the batteries in a dry, cool place. For longer periods of storage, remove the batteries from
the device to prevent self-discharge, rusting of the metallic and the escape of electrolyte.
Batteries kept for a duration of six months or longer should be charged and discharged
again at least every three months. If electrolyte has escaped, do not touch the areas
affected and dispose of the batteries as prescribed. Replace the battery if the operating
time has shortened considerably.
The standard warranty period for all BARTEC batteries is six months, whereby it is irrelevant
whether the battery was acquired separately or was contained in the scope of the delivery
of the tablet PC.