Bartec Lumen X7 B7-A23.-2 SERIES User manual

7" Industry Tablet Type B7-A23.-2.../........
Lumen X7 User Manual
ATEX / IECEx Zone 2 and 22 UL Class I Division 2

BARTECGmbH
Contact:
Max-Eyth-Straße 16
Phone: [phone]
[e-mail]
97980 Bad Mergentheim
Fax: [phone]
Download:
Germany
www.bartec.de/automation-download
User Manual - Translation
7" Industry Tablet - Lumen X7
Type B7-A23.-2.../……..
ATEX / IECEx Zone 2 / 22
UL Class I Division 2
Document No.: B1-A234-7D0001 / 391688
Revision 0 / Status: 23 March 2016
Proviso:Subject totechnical changes. Changes, mistakes and printing errors do
not substantiate any claim to damages.
Content Page
English 1-61

Table of content 7" Industry Tablet - Lumen X7
Type B7-A23.-2…/……..
Subject to technical changes.
03/2016
1. Basic Safety Information.............................................................................................................................................................1
1.1 Information on this User Manual........................................................................................................................1
1.1.1 Languages.........................................................................................................................................................2
1.1.2 Changes in the document..................................................................................................................................2
1.1.3 Registered trademarks.......................................................................................................................................2
1.2 Handling the product..........................................................................................................................................2
1.3 Intended use......................................................................................................................................................2
1.3.1 Exclusive purpose..............................................................................................................................................2
1.3.2 Unintended use..................................................................................................................................................3
1.4 Duties of the operator ........................................................................................................................................3
1.5 General safety information.................................................................................................................................3
1.6 Maintenance ......................................................................................................................................................3
1.6.1 Servicing............................................................................................................................................................4
1.6.2 Inspection...........................................................................................................................................................4
1.6.3 Repairs...............................................................................................................................................................4
1.6.4 Commissioning ..................................................................................................................................................4
1.7 Labelling, test certificate and standards ............................................................................................................4
1.8 Warranty.............................................................................................................................................................4
1.9 Co-applicable documents - set of documents....................................................................................................5
1.10 Definition of terms..............................................................................................................................................6
1.11 Configuration......................................................................................................................................................6
2. Product Description....................................................................................................................................................................7
2.1 Lumen X7...........................................................................................................................................................7
2.2 Structure ............................................................................................................................................................7
2.3 Purpose of use.................................................................................................................................................10
3. Technical Data ...........................................................................................................................................................................11
3.1 Explosion protection NI....................................................................................................................................11
3.2 Applicable standards........................................................................................................................................12
3.3 Features...........................................................................................................................................................14
3.3.1 Performance features ......................................................................................................................................14
3.3.2 Physical features..............................................................................................................................................14
3.3.3 User environment.............................................................................................................................................15
3.3.4 Voice and data transmission Wi-Fi (Wireless LAN).........................................................................................15
3.3.5 Voice and data transmission Wireless WAN...................................................................................................15
3.3.6 Voice and data transmission Bluetooth ...........................................................................................................16
3.3.7 Audio................................................................................................................................................................16
3.3.8 Camera............................................................................................................................................................16
3.3.9 RFID.................................................................................................................................................................16
3.3.10 NFC (Near Field Communication)....................................................................................................................17
3.4 Battery..............................................................................................................................................................17
3.5 External interfaces...........................................................................................................................................18
3.6 Product labelling ..............................................................................................................................................18
3.7 Laser labels......................................................................................................................................................20
4. Transport and Storage..............................................................................................................................................................21
4.1 Transport..........................................................................................................................................................21
4.2 Storage.............................................................................................................................................................21
5. Commissioning..........................................................................................................................................................................22
5.1 Scope of delivery .............................................................................................................................................22
5.1.1 Optional accessories........................................................................................................................................22
5.2 Requirements in potentially explosive atmosphere .........................................................................................23
5.3 Handling accessories.......................................................................................................................................24
5.4 First steps ........................................................................................................................................................24
5.4.1 Open/Close protective I/O cover......................................................................................................................25
5.4.2 Insert SIM card and Micro SD card..................................................................................................................25
5.4.3 Insert battery....................................................................................................................................................26
5.4.4 Charge battery .................................................................................................................................................26
5.4.5 Turn On and Off the Lumen X7 Industry Tablet...............................................................................................27
5.4.6 Remove/replace screen protector....................................................................................................................28
5.5 RFID.................................................................................................................................................................28

7" Industry Tablet - Lumen X7
Type B7-A23.-2…/…….. Table of content
Subject to technical changes.
03/2016
6. Operation....................................................................................................................................................................................29
6.1 Final inspection................................................................................................................................................29
6.2 Care and cleaning............................................................................................................................................29
6.2.1 Care.................................................................................................................................................................29
6.2.2 Cleaning...........................................................................................................................................................29
6.2.3 Suitable materials for cleaning.........................................................................................................................30
6.3 Operation, recommendations and requirements .............................................................................................31
6.3.1 Basic safety and health protection requirements.............................................................................................31
6.3.2 Ergonomic recommendation............................................................................................................................31
6.3.3 Vehicle installation...........................................................................................................................................31
6.3.4 Information on the use of wireless devices......................................................................................................33
6.3.5 LED devices.....................................................................................................................................................34
6.3.6 Restrictions in the case of wireless devices ....................................................................................................34
6.4 Operating frequency - FCC and IC..................................................................................................................35
6.5 Electromagnetic fields......................................................................................................................................37
6.6 Use the Android 4.2 Operating System...........................................................................................................38
6.6.1 Wake up the phone..........................................................................................................................................38
6.6.2 Use the touch screen.......................................................................................................................................39
6.6.3 Use the Home screen......................................................................................................................................39
6.6.4 Personalize the home screen..........................................................................................................................40
6.6.5 Use the On-Screen Keyboard..........................................................................................................................43
6.6.6 Edit text............................................................................................................................................................43
6.6.7 Set the display .................................................................................................................................................44
6.6.8 Set the audio profile.........................................................................................................................................45
6.6.9 Adjust volume ..................................................................................................................................................45
6.6.10 Set language and keyboard.............................................................................................................................46
6.6.11 USB debugging setting....................................................................................................................................48
6.6.12 About the phone...............................................................................................................................................48
6.6.13 Screenshot capture..........................................................................................................................................48
6.7 Connection to mobile networks and devices ...................................................................................................49
6.7.1 Check the network (3G) connection ................................................................................................................49
6.7.2 Turn on the data service..................................................................................................................................49
6.7.3 Connect to Wi-Fi networks...............................................................................................................................50
6.8 Connection to Bluetooth devices.....................................................................................................................51
6.8.1 Turn Bluetooth on or off...................................................................................................................................51
6.8.2 Connect / disconnect to Bluetooth devices......................................................................................................51
6.9 Connection / disconnection via USB................................................................................................................52
6.10 Use the camera................................................................................................................................................54
6.10.1 Open the camera.............................................................................................................................................54
6.10.2 Take a picture..................................................................................................................................................54
6.10.3 Record a video.................................................................................................................................................55
6.10.4 Open the galery ...............................................................................................................................................55
6.11 Use RFID NFC/HF...........................................................................................................................................55
6.11.1 Enable RFID HF/NFC......................................................................................................................................55
6.11.2 Daten mit Punkt zu Punkt (P2P) Verbindung übertragen................................................................................56
6.11.3 Use Read / Write Function...............................................................................................................................57
7. Faults and Troubleshouting.....................................................................................................................................................58
7.1 Troubleshooting...............................................................................................................................................58
8. Service, Inspection, Repair.......................................................................................................................................................59
8.1 Service intervalls..............................................................................................................................................59
8.2 Inspection.........................................................................................................................................................59
8.3 Service and repair work...................................................................................................................................59
8.3.1 Information on sending in for repairs ...............................................................................................................59
9. Disposal......................................................................................................................................................................................60
10. Forwarding and Packaging Information..................................................................................................................................60
11. Accessories................................................................................................................................................................................61
12. Additional Information..............................................................................................................................................................61
12.1 Links.................................................................................................................................................................61

- empty -

7" Industry Tablet - Lumen X7
Type B7-A23.-2…/…….. Basic Safety Information
Subject to technical changes.
03/2016 EN 1/61
1. Basic Safety Information
1.1 Information on this User Manual
Read carefully before putting the devices into operation.
The User Manual is a fixed part of the product. It must be kept in the direct vicinity of the
device and the installation, operating and service staff must have access to it at all
times.
The User Manual contains important information, safety instructions and test certificates
which are necessary for the perfect function of the devicein operation.
The User Manual is directed at all individuals concerned with the commissioning,
handling and servicing of the product. The applicable guidelines and standards for areas
with gas and dust atmosphere (99/92/EG, EN/IEC 60079-17 and EN/IEC 60079-19)
must be observed when conducting this work.
Knowledge of the safety and warning information in this User Manual and the strict
compliance with it is essential for safe installation and commissioning. Accidents, injuries
and material damage can be avoided by circumspect handling and systematically
following the instructions.
The examples, tables, and figures provided in this User Manual are for illustration
purposes. Due to the different
requirements of the respective application, the BARTEC
company cannot assume responsibility or liability for actual use based on the examples
and figures.
The BARTEC company reserves the right to carry out technical changes at any time.
In no event will BA
RTEC company be responsible or liable for indirect or consequential
damages resulting from the use or application of this User Manual.
Safety and warning information is particularly emphasised in this User Manual and
marked by symbols.
DANGER
DANGER
describes a directly imminent danger. If not avoided, death or severe injury
will be the consequence.
WARNING
WARNING
describes a possibly imminent danger. If not avoided, death or severe
injury may be the consequence.
CAUTION
CAUTION
describes a possibly imminent danger. If not avoided, mild or slight injury
may be the consequence.
ATTENTION
ATTENTION describes a possibly damaging situation. If notavoided, the plant or
objects in its vicinity may be damaged.
Important information on effective, economical & environmentallycompliant handling.

Basic Safety Information 7" Industry Tablet - Lumen X7
Type B7-A23.-2…/……..
EN 2/61 Subject to technical changes.
03/2016
1.1.1 Languages The original User Manual with safety information is written in German. All other available
languages are translations of the original UserManual.
The User Manual is available in German and English. If further languages are required,
these must be requested from BARTEC or stated on placing an order.
1.1.2 Changes in the document
BARTEC reserves the right to change the content of this document without notification.
No warranty is assumed for the correctness of the information. In cases of doubt, the
German safety instructions apply because it is not possible to rule out errors of translation
or printing. In the case of legal disputes, the “General Terms and Conditions of Business”
of the BARTEC Group also apply.
The current versions of the datasheets, operating instructions, certificates and EC
declarations of conformity can be downloaded from www.bartec.de under Products in the
product area “Automation & Enterprise Mobility” or may be requested directly from
BARTEC GmbH.
1.1.3 Registered trademarks
ARM® is a registered trademark of ARM Limited
Android is a registered trademark of Google Inc.
Bluetooth® is a registered trademark of Bluetooth Special InterestGroup
Winmate is a registered trademark of Winmate Communication, Inc.
1.2 Handling the product
The product described in this User Manual left the factory in a perfect and tested state in
terms of safety. To maintain this state and to achieve a perfect and safe operation of this
product, it may only be operated in the manner described by the manufacturer. In
addition, the perfect and safe operation of this product requires correct transportation,
proper storage and careful operation.
The safe and perfect handling of the Industry Tablet is a prerequisite for its perfect and
correct functioning.
1.3 Intended use
1.3.1 Exclusive purpose
The Industry Tablet series is a handheld piece of electrical equipment. It serves the
purpose of the mobile recording, processing and/or radio transmission of data within
potentially explosive atmospheres.

7" Industry Tablet - Lumen X7
Type B7-A23.-2…/…….. Basic Safety Information
Subject to technical changes.
03/2016 EN 3/61
It is used exclusively in combination with devices which comply with the requirements
placed on the overvoltage category I.
The admissibleoperating dataof the device used must be considered.
1.3.2 Unintended use Any other use is unintended and may lead to damage and accidents. The manufacturer
shall not be liable for any useextending beyond the exclusive purpose.
1.4 Duties of the operator
The operator undertakes to only permit persons to work with the Industry Tablet who:
are acquainted with the basic regulationson safety and accident prevention, and who
have been inducted in the use of the Industry Tablet,
have read andunderstood the documentation, the safety chapter andthe warnings.
The operator checks that the safety and accident prevention regulations applicable to the
respective case of use have been observed.
1.5 General safety information
Do not dry wipe orclean devices in potentially explosive atmospheres!
Do not open devices in potentially explosive atmospheres.
General statutory provisions or guidelines on occupational health and safety,
accident prevention provisions and environmental protection laws must be heeded,
e.g. Operational Safety Ordinance (BetrSichV) and nationally applicable ordinances.
Use suitable clothing and shoes with respect to the danger of hazardouselectrostatic
charges.
Avoid heat influences outside the specified temperature range.
Protect device from external influences! Do not expose device to caustic/aggressive
liquids, vapours or spray. In the case of malfunction or damaged enclosure, remove
the device immediately from the potentially explosive atmosphere andbring it to a
safe place.
1.6 Maintenance
The pertinent erection and operating provisions for electrical systems must be observed!
(E.g. Directive 99/92/EC, Directive 94/9/EC, BetrSichV and nationally applicable
ordinances EN 60079-14and the series DINVDE 0100)!
Observe the national waste disposal regulations when disposing ofthe devices.

Basic Safety Information 7" Industry Tablet - Lumen X7
Type B7-A23.-2…/……..
EN 4/61 Subject to technical changes.
03/2016
1.6.1 Servicing No constant servicing will be necessary if operated correctly under consideration of the
assembly instructions and environmental conditions. See Chapter “Service, inspection,
repair” in this respect.
1.6.2 Inspection According to EN/IEC 60079-17 and EN/IEC 60079-19, the operator of electrical systems
in potentially explosive atmospheres is obliged to have these inspected by an electrician
to ensure correct condition.
1.6.3 Repairs Repairs to explosion-protected devices may only be performed by authorised personnel
with original spare parts and according to the state of the art. The applicable provisions
must be observed in this respect.
1.6.4 Commissioning It must be checked that all components and documents are available before
commissioning.
1.7 Labelling, test certificate and standards
Labels on explosion protection and the test certificate are attached to the Industry Tablet.
See Chapter 3 “Technical data” with respect to labelling.
The guidelines and standards applicable to the Industry Tablet for devices and protected
systems for intended use in potentially explosive atmospheres are provided in Chapter 3
“Technical data”.
1.8 Warranty
WARNING
No changes or retrofits may be made without the written consent of the
manufacturer.
If non-specified components are used, the explosion
protection will no longer be
guaranteed. In the case of externally procured parts, it is not guaranteed that these
have been designed and manufactured in accordance with their load and requisite
safety.
Contact the manufacturer before any changes or retrofits to receive a release.
Only use original spare and wearing parts.

7" Industry Tablet - Lumen X7
Type B7-A23.-2…/…….. Basic Safety Information
Subject to technical changes.
03/2016 EN 5/61
The manufacturer shall exclusively assume the complete warranty only for spare parts
ordered from him.
Our “General Terms and Conditions of Sale and Delivery” shall apply in principle. These
shall be made available to the operator on signing of contract at the latest. Warranty and
liability claims in the case of injury and damage to property shall be excluded if they are
attributable toone or several of the following causes:
−Unintended use of the Industry Tablet.
−Incorrect handling.
−Failure to observe the information in the User Manual and the Quick Reference Guide
with respect to transport, storage, commissioning,operation and service.
−Independent structural changes.
−Faulty monitoringof parts subject to wear and tear.
−Incorrectly performed repairs.
−Cases of disaster through the impact of foreign bodies and force majeure.
The BARTEC company grants a warranty period of three years starting from the date of
delivery from the Bad Mergentheim factory on the Industry Tablets (exception: battery 6
months). The warranty period for accessories is one year starting from the date of delivery
from the Bad Mergentheim factory. This warranty covers all parts of the delivery and shall
be restricted to the free replacement or repair of the defective parts in our Bad
Mergentheim factory. For this purpose, any packaging supplied must be kept where
possible. In the case of warranty, the goods must be returned to us after written
agreement using an RMA form. There shall be no claimto repair at the sight of erection.
The information contained herein refers to the explosion-protected version of the Lumen
X7 Industry Tablet series.
This User Manualcontains all important information on the subject of explosion protection.
A Quick Start Guide and further product information on handling and commissioning are
similarly available.
1.9 Co-applicable documents - set of documents
−User Manual for the Lumen X7 Industry Tablet series:
The use, commissioning and settings of the explosion-protected version of the
Industry Tablet series are described in this User Manual.
−Quick Start Guide for the Lumen X7 Industry Tablet series:
The safety relevant information, initial use and further data on the explosion-protected
version of the Industry Tablet series are described in this Quick Start Guide.
−Technical Datasheet for the Lumen X7 Industry Tablet series:
This Technical Datasheet contains the most important explosion-relevant technical
data as well as general technical data.

Basic Safety Information 7" Industry Tablet - Lumen X7
Type B7-A23.-2…/……..
EN 6/61 Subject to technical changes.
03/2016
1.10 Definition of terms
A few abbreviations are used in the documentation.
NI = Non Incendive =>
is used as generic term forZone 2 and Division 2 version
Lumen X = stands for the entire explosion-protected product series
1.11 Configuration
The devices are only supplied with preinstalled operating system.
-Android 4.2.1 (Jelly Bean)
Customer software or further applications are not contained in the delivery.
This User Manual refers to the following configurations:
Configuration
Version
Processor
ARM® Cortex™-A7 Quad Core 1.5 GHz
System memory
1 GB Mobile DDR2
Main memory
16 GB eMMC
Expandable
memory
Micro SD card, supports up to 32 GB
Display
7" WSVGA TFT LCD with 1024 x 600 Pixel resolution
WLAN/WiFi
IEEE 802.11 a/b/g/n
Bluetooth
Version 3.0 + EDR
WWAN
(optional)
3.75G - only data transfer
HSPA / UMTS / GPRS / WCDMA / GSM
GPS
integrated
Kamera 5 MP camera onthe back
RFID NFC/HF
−13,56 MHz
−ISO 15693 (Read)
−ISO 14443-A (Read)
−ISO 18092 (Read/Write)

7" Industry Tablet - Lumen X7
Type B7-A23.-2…/…….. Product Description
Subject to technical changes.
03/2016 EN 7/61
2. Product Description
2.1 Lumen X7
Lumen X7 Industry Tablets are tough tablets with 7" display, which have been designed
for use in the industrial environments and especially developed by BARTEC for use in
potentially explosive atmospheres.
The Lumen X7 Industry Tablet is based on the ARM Cortex-A7 Quad Core processor
running at 1.5 GHz. The 7-inch capacitive multi-touch display offers 1024 x 600 pixel
WVGA resolution.
The Lumen X7 Industry Tablet owns a large number of international certifications and can
be used worldwide. It is approved for ATEX/IECEx Zone 2 / 22 and UL Class I Division 2.
Further country approvals are available on request.
Because of its numerous functions, the Lumen X7 Industry Tablet is perfect for stock
management, transport, maintenance technicians, operating personnel, engineers, and
project managers afield and in industry.
2.2 Structure
Front and side view

Product Description 7" Industry Tablet - Lumen X7
Type B7-A23.-2…/……..
EN 8/61 Subject to technical changes.
03/2016
Position
Designation
Description
1
7” touch screen
Display and data input medium of the tablet
2
Home button
Returns to home screen
3
Menu button
Opens a list of actions that the user can do on
the current screen
4
Return button
Returns to the previous screen
5
Trigger button
If the device was equipped with scanners,this
button can befunction as a trigger button
6
Light sensor
Controls the screen brightness
7
Battery status green
Indicates the device is charging
8
Battery status red
Indicates low battery
9
Power mode status
Blue light: indicates Power On
No light: indicates no Power
10 Standard I/O cover Prevents the access to the Inputs/Outputs in
potentially explosive atmospheres
11
Volume up
Increases the volume of music or radio
12
Volume down
Decreases the volume of music or radio
13
Audio Jack
(under cover)
Connects a set of headphones, external
speakers, or an audio device
14 Power Jack
(under cover)
DC-IN power input jack
15 USB ports
(under cover) Connects USB flash drive2.0 / mouse / printer /
keyboard, etc
16
MicroSD Card
Reader (under cover)
Memory card reader port for MicroSD Card
17 3G Module/SIM card
slot (under cover)
Service window to insert Micro SIM card also
provides access to 3G module.
18
Docking connector
Port to dockingsolutions such as vehicle
docking to provide power and external antenna
19 Power Button Press and holdthe button for3 seconds to turn
on the device
Press to turn on/off the screen
Press and holdthe button for3 seconds to
select:
•Power Off - to turn off the device press
button for 8 Sec to force system power off
•Airplane mode – to disable all wireless
connections
•Restart - to restart the device

7" Industry Tablet - Lumen X7
Type B7-A23.-2…/…….. Product Description
Subject to technical changes.
03/2016 EN 9/61
Rear view
Position
Designation
Description
20 LED auxiliary light Provides lighting while using the
camera
21
Rear Camera 5 MP autofocus camera captures
photos and videos
22 Optional Barcode Barcode s
canner for reading 1D/2D
barcode
is not available as certified
version for use in hazardous locations.
23 Battery Replaceable battery,
battery with 3.7 V, 5300 mAh
24 Speaker Provides
audio output for music and
video
25 2 x Battery Clips 2 clips for batterylock and unlock

Product Description 7" Industry Tablet - Lumen X7
Type B7-A23.-2…/……..
EN 10/61 Subject to technical changes.
03/2016
2.3 Purpose of use
The Lumen X7 Industry Tablets are handheld electrical devices. They serve the purpose
of entry, processing and (radio) transmission of data within potentially explosive
atmospheres.
The Lumen X7 Industry Tablet is used exclusively in combination with devices which
comply with the requirementsplaced on the overvoltage category I.
The Lumen X7 Industry Tablets,Type B7-A231-2…./…….. have been modified for use in
the following potentially explosive atmospheres:
−UL Class I Division 2
The Lumen X7 Industry Tablets,Type B7-A231-2…./…….. may not be used in the
following zones:
−ATEX / IECEx Zone 0, 1, 2, 22 and 21
−Class II Division 2
−Class I, II Division 1
−Class III
The Lumen X7 Industry Tablets,Type B7-A234-2…./…….. have been modified for use
in the following potentially explosive atmospheres:
−ATEX / IECEx Zone 2 und Zone 22
−UL Class I Division 2
The Lumen X7 Industry Tablets,Type B7-A234-2…./…….. may not be used in the
following zones:
−ATEX / IECEx Zone 0, 1 and 21
−Class II Division 2
−Class I, II Division 1
−Class III

7" Industry Tablet - Lumen X7
Type B7-A23.-2…/…….. Technical Data
Subject to technical changes.
03/2016 EN 11/61
3. Technical Data
3.1 Explosion protection NI
ATEX Zone 2 and 22
TypeB7-A234-2…/…….. Lumen X7
Labelling II 3G Ex ic IIC T5 Gc
II 3D Ex ic IIIB T100°C Dc
-10 °C ≤ Ta ≤ +50 °C
Test certificate EPS 15 ATEX 1 037 X
Standards EN 60079-0:2012 + A11:2013
EN 60079-11:2012
Guidelines ATEX 94/9/EG
EMV 2004/108/EG
R&TTE 1999/5/EG
RoHS 2002/95/EG
IECEx Zone 2 and 22
TypeB7-A234-2…/…….. Lumen X7
Labelling Ex ic IIC T5Gc
Ex ic IIIB T100°C Dc
-10 °C ≤ Ta ≤ +50 °C
Test certificate IECEx EPS 15.0053X
Standards IEC 60079-0:2011 Edition 6.0
IEC 60079-11:2011 Edition 6.0
UL Class I Division 2
Type B7-A234-2…/……..
Type B7-A231-2…/…….. Lumen X7
Labelling Class I Division 2
Test certificates
USA and Canada E321557 Vol 5 sec 1
Standards ANSI/ISA 12.12.01-2013
CAN/CSA C22.2 No. 213-M1987

Technical Data 7" Industry Tablet - Lumen X7
Type B7-A23.-2…/……..
EN 12/61 Subject to technical changes.
03/2016
X -
labelling (special conditions of use for secure operation within the potentially
explosive atmosphere)
The ambient temperature range is -10 °C to +50 °C.*
The device must be protected from impact with high impact energy, from intense
UV-irradiation, and strongly charge generating processes.
It is not allowed to use connectors inside the potentially explosive atmosphere.*
It is not allowed to remove, change and/or charge the battery inside the potentially
explosive atmosphere.*
*See individual chapter on thepoints in the User Manual.
3.2 Applicable standards
Explosion protection
EN 60079-0:2012 + A11:2013
Explosive atmospheres - Part 0: Equipment -
General requirements
EN 60079-11:2012
Explosive atmospheres - Part 11: Equipment
protection by intrinsic safety "i"
IEC 60079-0:2011
Explosive atmospheres - Part 0: Equipment -
General requirements
IEC 60079-11:2011
Explosive atmospheres - Part 11: Equipment
protection by intrinsic safety "i"
ANSI/ISA 12.12.01
ANSI/ISA-12.12.01-2013 Nonincendive Electrical
Equipment for Use in Class I and II, Division 2
and Class III, Divisions 1 and 2 Hazardous
(Classified) Locations
CAN/CSA C22.2 No. 213-M1987
Non-Incendive Electrical Equipment for Use in
Class I, Division 2 Hazardous Locations
Electrical safety
IEC 60950-1 (ed.2); am1
CSA22.2 No. 60950-1-07
Information technology equipment - Safety -
Part 1: General requirements
Radio specification - WLAN / Bluetooth
EN 300 328 V1.8.1: 2012
Electromagnetic compatibility and radio spectrum
matters (ERM) – wideband transmission systems
– data transmission equipment operating in the
2.4 GHz ISM band and using wideband
modulation techniques

7" Industry Tablet - Lumen X7
Type B7-A23.-2…/…….. Technical Data
Subject to technical changes.
03/2016 EN 13/61
Safety specification - Specific Absorption Rate (SAR)
EN 62209-2:2010
Human exposure to radio frequency fields from hand-
held and body-mounted wireless communication devices
– Human models, instrumentation and procedures – Part
2: Procedure to determine the specific absorption rate
(SAR) for wireless communication devices used in close
proximity to the human body
RSS-132
Issue 3 January 2013
Industry Canada: Cellular Telephone Systems Operating
in the Bands 824-849 MHz and 869-894 MHz
RSS-133
Issue 6 January 2013
Industry Canada: 2 GHz Personal Communications
Services
RSS-139
Issue 2 February 2009
Industry Canada: Advanced Wireless Services (AWS)
Equipment Operating in the Bands 1710-1780 MHz and
2110-2180 MHz
RSS-210
Issue 8 December 2010
Industry Canada: Licence-exempt Radio Apparatus (All
Frequency Bands): Category I Equipment
Safety specification - Laser and/or LED Products
EN 60825-1
Safety of laser products – Equipment classification and
requirements
Electromagnetic compatibility (EMC)
EN 300 440-1 V1.6.1:2010
Electromagnetic compatibility and radio spectrum matters
(ERM) – short range devices – radio equipment to be
used in the 1 GHz to 40 GHz frequency range – Part 1:
Technical characteristics and test methods
EN 300 440-2 V1.4.1:2010
Electromagnetic compatibility and radio spectrum matters
(ERM) – short range devices – radio equipment to be
used in the 1 GHz to 40 GHz frequency range – Part 2:
Harmonised EN covering essential requirements of article
3.2 of the R&TTE Directive
EN 50566:2013
Product standardto demonstrate compliance of radio
frequency fieldsfrom handheld and body-mounted
wireless communication devices used bythe general
public (30 MHz - 6 GHz)
EN 55022: 2010
Information technology equipment – radio disturbance
characteristics – limits and methods of measurement
EN 55024: 2010
Information technology equipment – radio disturbance
characteristics – limits and methods of measurement
EN 61000-3-2: 2006 + A1:
2009 + A2: 2009
Limits – Limits for harmoniccurrent emissions
(equipment input current <= 16 A per phase)
EN 61000-3-3: 2008
Limits – limitation of voltage charges, voltage fluctuations
and flicker in public low-voltage supply systems, for
equipment with rated current <=16 A per phase and not
subject to conditional connection
FCC Part 15 Class B
EMC requirements in the USA: Testing for compliance
with limits for adigital device of Class B
IC ICES-003
EMC requirements in Canada:
Testing for compliance with limits for a digital device of
Class B

Technical Data 7" Industry Tablet - Lumen X7
Type B7-A23.-2…/……..
EN 14/61 Subject to technical changes.
03/2016
3.3 Features
3.3.1 Performance features
Processor
ARM® Cortex™-A7 Quad Core 1.5 GHz
RAM
1 GB Mobile DDR2
Main memory
16 GB eMMC
Extension slot
Micro SD card slot supports up to 32 GB
It is not allowed to insert or change the card inside
the potentially explosive atmosphere!
Lumen X7 interfaces
(underneath the protection cover) 1 x SIM card slot 1 x Micro SD card slot
1 x Micro USB 2.0 type B (OTG)
1 x power connection (DC)
1 x audio combo connection
(Microphone In/Line-out)
Interface for charging via
desktop docking station
1 x 7-pin docking connector (PoGo pin)
Operating system
Android 4.2 (Jelly Bean)
Application availability
Google App Store is pre-installed
Software development
Own development possible with standard Google
Android SDK.
Additional are the OS image, SDK and drivers
available as download.
3.3.2 Physical features
Dimensions
in mm/in
(Length x Width x Height)
212.4 x 132.8 x 19 mm
(8.36 x 5.23 x 0.75 inch)
Weight (with standard battery)
600 g (ca. 1.32 lb)
Display
Size
7"
Brightness
500 cd/m² (nits)
Resolution
1024 x 600 pixels
Touch
projective capacitive multi-touch
Interactive sensor technology -Light sensor
-G sensor
-Proximity sensor
-Digital compass
Keys on front side
(see also chapter2.2 "Structure") -1 x Power on/off button
-2 x Function button (F1, F2)
-1 x Volume up/down button
-4 x Home, Menue