Bartscher S40 User manual

S40
100524
S70
100528
Original
-
Gebrauchs
anleitung
V2-1/1016

- 19 -
ENGLISH
Table of contents
1.Safety ........................................................................................................................ 20
1.1 Key to symbols..................................................................................................... 20
1.2 Safety instructions................................................................................................ 21
1.3 Proper use............................................................................................................ 25
2. General information................................................................................................ 26
2.1 Liability and Warrantees....................................................................................... 26
2.2 Copyright protection ............................................................................................. 26
2.3 Declaration of conformity...................................................................................... 26
3. Transport, packaging and storage......................................................................... 27
3.1 Delivery check...................................................................................................... 27
3.2 Packaging............................................................................................................. 27
3.3 Storage................................................................................................................. 27
4. Technical data......................................................................................................... 28
4.1 Overview of parts ................................................................................................. 28
4.2 Technical specification ......................................................................................... 30
5. Installation and operation....................................................................................... 31
5.1 Installation............................................................................................................ 31
5.2 Operation.............................................................................................................. 32
6. Cleaning................................................................................................................... 35
7. Waste disposal........................................................................................................ 36
Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten phone: [phone]
Germany fax: [phone]
GB/UK

- 20 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
Please keep these instructions and give them to future owners of the device.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions
in this instruction manual.
1.1 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards which could lead to injury.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.
HOT SURFACE!
This symbol is a warning that the device surface is hot when in use.
Ignoring this warning may result in burns!

- 21 -
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
NOTE!
This symbol highlights recommendations and information aimed for effective
and trouble-free device operation.
1.2 Safety instructions
• The device is not intended for use by individuals (including
children) with physical or mental disabilities, insufficient
experience, and/or insufficient knowledge unless such persons
are under the care of a person responsible for their safety or
have received instructions regarding appropriate use of the
device.
• Children should be observed to ensure that they are not playing
with the device.
• Never leave the device unattended when in use.
• Only use the device indoors.
• The device is not adapted for use with an external timer or
remote control.
• This device may only be operated in technically proper and safe
condition.
• Prevent access of children to the package materials like plastic
bags and foamed polystyrene elements. Suffocation hazard!
• Only a qualified technician and using original spare parts and
accessories should carry out repairs and maintenance of the
device. Do not attempt to repair the device yourself.

- 22 -
•
Do not use any accessory or spare parts that have not been
recommended by the manufacturer. These can be dangerous
for the user or lead to damages of the device or personal injury,
and further, the warranty expires.
• To prevent hazards and to ensure optimum efficiency, no
modifications or alterations to the device that are not explicitly
approved by the manufacturer may be undertaken.
DANGER! Electric shock hazard!
To avoid the hazard results please follow the safety instructions
below.
• Never allow the power cable to come into contact with heat
sources or sharp edges. The power cable should not hang over
the side of the working surface. Ensure that no one can step on
or trip over the cable.
• The power cable must not be folded, bent or tangled, and must
always remain fully unrolled. Never place the device or other
objects on the power cable.
• Do not lay the power cable over carpets or other inflammable
materials. Do not cover the cable. Keep away the cable from
operating range and do not immerse it into water.
• Check the power cord regularly for damage. Do not use the
appliance if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified electrician
in order to avoid dangers.
• The supply cable must be disconnected from the socket
only by pulling the plug.

- 23 -
•
Never carry or lift the device by the supply cable.
• In any case do not open the device housing. In case of
electrical or mechanical modifications the electric shock
hazard will occur.
• Never immerse the the power cord and the power plug in water
or other liquids.
• Do not use any acid agents and make sure no water
ingresses the device.
• Never operate the device with moist hands or standing on wet
floor.
• Remove the plug from its socket:
- when the device is not used,
- in case of anomalies during operation,
- before cleaning.
HOT SURFACE! Burn hazard!
Follow the safety instructions listed in order to avoid the hazard:
• The grill and the housing of the device become very hot during
the operation. Never touch them with bare hands. In order to
remove the grills use the special handles designed for that
purpose.
• Trays with food are very hot as well. Food on the grill should be
removed with use of handles and grill should be placed on the
temperature-resistant surface. In order to avoid burns use the
protective gloves or handle the plates/containers with food with
use of kitchen towels.
• The device remains hot also for some time after turning off,
so before cleaning or moving the device wait until it cools
down.
• Never move the device when it is switched on.

- 24 -
WARNING! Fire or explosion hazard!
Follow the safety instructions listed in order to avoid the hazard:
• To avoid the fire hazard and the damages of the device never
place the kitchen utensils, towels, paper, etc. on the device or
grills.
• Never use the device near flammable materials, such as
alcohol, spirits, or petrol. High temperature may cause their
evaporation and due to contact with the ignition sources the
deflagration may occur, and in result the injuries and damages.
• In case of fire before the fire extinguishing activities remove the
plug from the socket or disconnect the device from the power
supply. Assure sufficient flow of fresh air.
Caution: Never use water for fire extinguishing when the device
is connected to the power supply. Electric shock hazard!

- 25 -
1.3 Proper use
CAUTION!
The device has been designed and built for commercial use and should
be operated only by qualified personnel in kitchen facilities.
The operational safety of the device is assured only in case of proper use, according
to the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
The device is designed only for heating, roasting, and grilling of food.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.

- 26 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
-violation of advice concerning operation and cleaning;
-use other than designed;
-alterations made by user;
-use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.

- 27 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-do not store outdoors;
-keep it dry and dust-free;
-do not expose it to aggressive media;
-do not expose it to direct sunlight;
-avoid mechanical shocks and vibration;
-in case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly, iIf required
refresh or renew.

- 28 -
4. Technical data
4.1 Overview of parts
100524
1
Housing
2
Grill guide
3
Power indicator (green)
4
Heating indicator
5
Temperature control
6
Feet (4)
7
Grill with anti-tilt device
8
Crumbs tray
9
Grill handle
10
Ventilation holes
2
3
4
6
и
1
5
9 8
10
10
7

- 29 -
100528
Operation elements
1
Housing
2
Handle for grill position change (2)
3
Bracket for setting grill position
4
Grill
5
Grill handle
6
Crumbs tray
7
Heating indicator, left zone
8
Power supply (green), left zone
9
Temperature controller, left zone
10
Heating indicator, right zone
11
Power supply (green), right zone
12
Temperature controller, right zone
13
Feet (4)
14
Ventilation holes
8 7
9
11
12
1
3
2
13
14
14
4
5
6
10

- 30 -
4.2 Technical specification
Name Salamander S40
Code-No.:
100524
Material: nickel-chrome steel 18/10
Realization:
infrared emitting heater “Incoloy“
grill with anti-tilt device, W 430 x D 305 mm
indicator
Power supply: 2.2 kW / 230 V 50 Hz
Dimensions: W 597 x D 368 x H 365 mm
Weight: 13.8 kg
Equipment: crumbs tray
Name Salamander S70
Code-No.:
100528
Material: nickel-chrome steel 18/10
Realization:
2 heating zones
infrared emitting heater “Incoloy“
grill of variable vertical position, W 640 x D 300 mm
indicator
Power supply: 4.4 kW / 400 V 50 Hz 3 NAC
Dimensions: W 878 x D 500 x H 370 mm
Weight: 21.4 kg
Equipment: crumbs tray
We reserve the right to make technical changes!

- 31 -
5. Installation and operation
5.1 Installation
CAUTION!
Any installation, connection and maintenance work related to the device must
be performed by the qualified and certified technician in accordance with the
applicable international, national and local regulations.
Positioning
•Unpack the device and dispose of all packing material.
•Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.
•Never place the device in humid or wet environment.
•Never place the device on the flammable surfaces.
•Never place the device near flammable materials.
•The installation place must be easily accessible and sufficiently spacious to allow
for easy operation of the device and good air circulation. Maintain distance of at
least 10 cm to the walls and other objects.
•Remove the protective foil from the device before use. Remove the foil slowly in
order to not to leave the glue residuals. Any glue residuals may be removed with
use of proper solvent.
CAUTION!
Never remove the rating plate and any warning signs from the device.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!

- 32 -
•Before connecting the device make sure that the voltage and frequency values on the
rating plate are consistent with the existing electric installation.
The allowable voltage deviation is ±10%.
•Make sure that the available electric connection conforms to the valid regulations and
is equipped with protective wire. Use cable of sufficient cross section for connection to
the power supply.
•Between the device and the electric system there must be the multipole switch
installed, appropriate for the device power. The switch of contacts separation of at
least 3 mm must be easily accessible.
•Connect the device to the electric installation according to the valid international,
national, and local regulations.
•The device 100524 is equipped with connection cable with plug (single-phase
230 V). In order to connect to the power supply just insert the plug into the earthed
socket with protective contact.
5.2 Operation
Before the first use
•Before the device operation clean it and its equipment according to the instructions
in section 6 “Cleaning”.
•Place grill in the device. Select grill level according to preparation method or size
of dishes.
•In device 100524 insert grill with anti-tilt device into
the guides (at the bottom, in the middle, at the top).
•Grill of variable vertical position in device 100528 is
positioned in the following way:
a) use handle to insert grill;
b) set required height with use of both handles for
grill position adjustment, tilting them towards
inside and locking in the height adjustment
bracket.

- 33 -
•Place supplied crumbs tray
under the grill.
CAUTION!
Keep in mind that the crubms tray should be placed under the grill in the
device to receive crumbs created during preparation of food.
Settings
•Connect the device to the power supply. The green power indicator will come on.
•The device 100524 is equipped with one infrared emitting heater “Incoloy” and
the device 100528 is equipped with two such heaters. Each radiator allows for
independent power adjustment, depending on food preparation method, and each is
equipped with resistive heaters controlled by the temperature controller (Simmerstat).
•Temperature setting (level 1 - 3) is realized with use of appropriate temperature
controller.
•The heating indicator comes on when the temperature controller is moved. After
reaching the preset temperature the indicator goes off and comes on again when
temperature in the device drops below the setpoint and the controller reactivates
the heater. That process is repeated until the temperature controller is set in
position “0” (OFF).
Food preparation
•Place selected food in appropriate dishes (e.g. plates, baking moulds, etc.) on the
grill under selected infrared radiator. Depending on preparation method or size of
containers select suitable grill guides (lower, central, upper).
Food must not touch the heaters!
CAUTION!
The device is not designed for food preparation directly on the grill, always use
appropriate heat-resistant dishes (containers).
Crumbs tray

- 34 -
•Use the temperature controller to set appropriate temperature level (1 - 3) in
selected heating zone. For roasting and grilling use the highest temperature
level 3, levels 1 i 2 are designed for heating or maintaining temperature.
CAUTION!
The device must be supervised during operation as any defect may
cause overheating and damage of the device!
HOT SURFACE! Burn hazard!
Grill and dishes become very hot during the operation.
Food on the grill should be removed with use of handles
and grill should be placed on the temperature-resistant
surface.
In order to avoid burns use the protective gloves or handle
the plates/containers with food with use of kitchen towels.
•Carefully remove prepared food.
•When the device is no longer used set the temperature controllers to “0” and
disconnect the device from the power supply.
•Allow it to cool down.
•Remove and empty the crumbs tray. Clean the crumbs tray periodically with use of
soft moistened cloth and warm water. Dry the tray thoroughly before placing it in the
device.

- 35 -
6. Cleaning
WARNING!
Before cleaning disconnect the electric power supply
and wait for the device to cool down.
Never clean the device with use of water jet!
Be careful and do not let the water into the device.
CAUTION!
Use only soft cloths, never use any abrasive cleaning agents which could
scratch the device surface.
Cleaning
oDue to hygienic reasons and to remove the defects the device should be cleaned
after each working day, and when required between the grilling processes as well.
oRemove grill and crumbs tray from the device, wash them with use of gentle
cleaning agent and rinse in clean water.
oClean interior and exterior of the device with use of common degreasing agents.
Make sure that used cleaning agents are approved for use with food.
NOTE!
Follow the instructions of the cleaning agent manufacturer!
oThen rinse the device with clean water and dry with use of soft cloth.
oDo not allow for prolonged contact of the device surfaces with concentrated acids,
vinegar, salt solution, spice mixtures. Such products should be removed as quickly
as possible to avoid the material damages.
oPeriodically check and clean the ventilation slots to avoid air circulation problems in
the device. Clean the device with plastic brushes.

- 36 -
Storage of the device
oIf the device is not used for a long time, clean it thoroughly as described and store it
in a place which is clean, dry, frost-free, protected from the sun and inaccessible for
children. Do not place any heavy objects on the device.
7. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in your community.
WARNING!
To exclude any abuse and the dangers involved make
the waste device unfit for use before disposal. For that
purpose disconnect device from mains supply and
remove mains connection cable from the device.
CAUTION!
For the disposal of the device please consider and
act according to the national and local rules and
regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
33154 Salzkotten phone: [phone]
Germany fax: [phone]