Bartscher Flex 7360 User manual

Flex 7360
1583011

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Service hotline: [phone]
www.bartscher.com
1312CR6138
Version: 1.0
Date of preparation: 2021-06-18
EN

1583011 1 / 32
Original instruction manual
1Safety............................................................................................................2
1.1 Explanation of Signal Words....................................................................2
1.2 Safety instructions....................................................................................3
1.3 Intended Use ...........................................................................................6
1.4 Unintended Use.......................................................................................6
2General information.......................................................................................7
2.1 Liability and Warranty ..............................................................................7
2.2 Copyright Protection ................................................................................7
2.3 Declaration of Conformity ........................................................................7
3Transport, Packaging and Storage................................................................8
3.1 Delivery Check.........................................................................................8
3.2 Packaging................................................................................................8
3.3 Storage....................................................................................................8
4Technical Data...............................................................................................9
4.1 Technical Specifications ..........................................................................9
4.2 Functions of the Appliance.....................................................................13
4.3 List of Components of the Appliance .....................................................14
5Installation Instructions................................................................................15
5.1 Installation..............................................................................................15
5.2 Electrical Connection.............................................................................17
5.3 Gas Connection.....................................................................................18
6Operating Instruction...................................................................................23
6.1 Operation...............................................................................................23
7Cleaning and Maintenance..........................................................................28
7.1 Safety Instructions for Cleaning.............................................................28
7.2 Cleaning.................................................................................................28
7.3 Maintenance ..........................................................................................30
8Disposal....................................................................................................... 30

Safety
2 / 32 1583011
EN
Diese Bedienungsa nleitung beschreibt di eI nstallation, Bedienu ngu nd Wartung des G erätsu ndg ilt als wichtige Infor mationsquelle und N achschlagewer k.Die Ke nntnis aller enthaltene nSic herheitshinweis eu ndH andlungs anweisungen schaf ft die Voraussetzung f ürd as sichere und sachg erechte Arbeiten mit d emG erät.D arüber hinaus müssen die für de nEi nsatzbereich des G erätsg eltenden örtlich enU nfallverhütungs vorschriften und allgem einen Sicherheitsb estimmungen eing ehalten werden. Dies e Bedienungsanleit ungis t Bestandteil des Pro dukts und muss in u nmittelbarer Nähe des Ger äts für das In¬stall ations-, Bedienungs- , Wartungs- und Reinigu ngspersonal jederzeit z ugänglich auf¬b ewahrt werden. Wenn das Ger ät an eine dritte Person
weitergegeben wird , muss die Bedienungsa nleitung mit ausgehä ndigt werden.
Read this instruction manual before using and keep it available
at all times!
This instruction manual contains information about installation, operation and
maintenance of the appliance and constitutes an important source of information
and reference guide. The knowledge of all operational and safety instructions
included in this manual is a prerequisite for safe and proper handling of the
appliance. Additionally, accident prevention, occupational health and safety, and
legal regulations in force in the area the appliance is used apply.
Before you start using the appliance, especially before turning it on, read this
instruction manual in order to avoid personal injuries and property damages.
Improper use may cause damage.
This instruction manual forms and integral part of the product and must be stored in
an immediate vicinity of the appliance and be available at all times. The instruction
manual should be transferred together with the appliance.
1 Safety
This appliance has been manufactured in accordance with technical standards
currently in force. However, the appliance may be a source of hazards if used
improperly or contrary to its intended purpose. All persons using the appliance must
consider information included in this instruction manual and observe safety
instructions.
1.1 Explanation of Signal Words
Important safety instructions and warning information are indicated in this
instruction manual with appropriate signal words. You must strictly follow the
instructions, to prevent accidents, personal injuries and property damages.
DANGER!
The signal word DANGER warns against hazards that lead to severe
injuries or death if the hazards are not avoided.

Safety
1583011 3 / 32
EN
WARNING!
The signal word WARNING warns against hazards that may lead to
moderate or severe injuries or death if the hazards are not avoided.
CAUTION!
The signal word CAUTION warns against hazards that may lead to
light or moderate injuries if the hazards are not avoided.
,di e
IMPORTANT!
The signal word IMPORTANT indicates possible property damages,
which may occur if safety instructions are not observed.
NOTE!
The symbol NOTE indicates subsequent information and guidelines
for the user on usage of the appliance.
1.2 Safety instructions
Electrical Current
•Too high a mains voltage or incorrect installation may cause electric shock.
•The appliance may be connected only if data on the rating plate correspond with
the mains voltage.
•To avoid short-circuit, the appliance should be kept dry.
•If there are malfunctions during operation, disconnect the appliance from the
power supply.
•Do not touch the appliance’s plug with wet hands.
•Never take hold of the appliance if it has fallen into water. Immediately
disconnect the appliance from the power supply.
•Any repairs or housing opening may be carried out by professionals and
relevant workshops only.
•Do not transport the appliance, holding it by the power cord.
•Do not allow the power cord to come into contact with heat sources or sharp
edges.
•Do not bend, pinch nor knot the power cord.

Safety
4 / 32 1583011
EN
•Always completely unwind the power cord.
•Never place the appliance or other objects on the power cord.
•Always take hold of the plug to disconnect the appliance from the power supply.
•Check the power cord regularly for damage. Do not use the appliance if the
power cord is damaged. If this cable is damaged, it must be replaced by
customer service or a qualified electrician in order to avoid dangers.
Safety of Gas Supplied Appliances
•Do not use a gas supplied appliance in the event of a malfunction or damage or
in the case of a suspected malfunction or damage. In such a case set the gas
control knob(s) to 'O' and close the main gas valve. Contact the service
company immediately.
•Regularly conduct tightness checks using suds (a spray for detecting leakages).
Do not use open flame for checking tightness of gas installation!
WARNING!
Danger of suffocating and explosion due to leaking gas!
•When you sense gas odour, observe the following rules:
–immediately close the gas control knob(s) and the main gas valve;
–provide for sufficient venting of rooms: open wide all doors and windows;
–do not light up any open flame, quench flames;
–do not smoke;
–do not produce sparks, do not actuate any electric switches, do not use
phones (irrespective of it being landline phone or mobile phone);
–do not operate any electric appliances in the vicinity of a gas supplied
appliance;
–if needed, notify all persons in a building by calling loud and knocking on
doors;
–leave building;
–when outside of a building, contact the service company. If it is
impossible to precisely locate gas leak, immediately phone fire fighters
and notify gas supplier.
Flammable Materials
•Never use the appliance near flammable or easily combustible materials (e.g.:
petrol, spirit, alcohol). High temperature triggers evaporation of these materials,
and, as a result of contact with sources of ignition, an explosion may occur.

Safety
1583011 5 / 32
EN
•Use the appliance only with materials designed to this end and with correct
temperature settings. Materials, food products and left-overs of food products
remaining in the appliance may catch fire.
•To avoid fire hazard, clean the appliance regularly.
•Never leave the appliance unattended, especially when cooking with fats or oils
as they may cause fire.
•Close the gas shut-off valve should the fire emerge. Never put the flame out with
water; to suppress fire, use a lid or a fire-blanket. Following extinction of fire,
ensure sufficient fresh air inflow.
Supervised Usage only
•Only supervised appliance may be used.
•Always remain in an immediate vicinity of the appliance.
Hot Surfaces
•Surfaces of the appliance become hot during operation. Burning hazard! High
temperature remains for some time after switching the appliance off.
•Do not touch any hot surfaces of the appliance. Use the provided handling
elements and holders.
•You may transport and clean the appliance after it cools down entirely.
•It is prohibited to sprinkle hot surfaces with cold water or flammable liquids.
Operating Personnel
•The appliance may only be operated by qualified personnel and trained
specialist personnel.
•This appliance may not be operated by persons (including children) with limited
physical, sensory or mental capabilities, nor by persons with limited experience
and/or limited knowledge.
•Children should be supervised to ensure that they are not playing with or
switching on the appliance.
Improper Use
•Unintended or prohibited use may cause damage to the appliance.
•The appliance may only be used when its technical condition is flawless and
allows for safe operation.
•The appliance may only be used when all connections are executed according
to rules of law in force.

Safety
6 / 32 1583011
EN
•The appliance may only be used when it is clean.
•Use only original spare parts. Never attempt to repair the appliance on your own.
•Do not introduce any changes in the appliance nor modify it.
1.3 Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
- Preparation of food (baking, cooking, stewing, frying, etc.) in professional
kitchens, e.g. in restaurants, hospitals, canteens in plants, butcher’s and
food products production plants.
1.4 Unintended Use
An unintended use may lead to personal injuries or property damages caused by
hazardous voltage, fire or high temperature. The appliance may only be used to
perform tasks described in this instruction manual.

General information
1583011 7 / 32
EN
2 General information
2.1 Liability and Warranty
All information and instructions in this instruction manual account for legal
regulations in force, current level of technical engineering knowledge as well as our
expertise and experience, developed over the years. If special models or additional
options are ordered, or state-of-the-art technical solutions were implemented, the
actual scope of delivery of the appliance may, in some circumstances, differ from
descriptions and numerous drawings in this instruction manual.
The manufacturer is not liable for any damages nor faults stemming from:
–failure to observe instructions,
–unintended use,
–technical alterations introduced by the user,
–usage of unapproved spare parts.
We reserve the right to introduce technical modifications to the product, intended for
improvement of the appliance and its performance.
2.2 Copyright Protection
This instruction manual, and texts, drawings and images included in it, as well as its
other components are copyright protected. It is prohibited to reproduce this
instruction manual (including its excerpts), in any form and by any means, and to
use and/or transfer its content to third parties without manufacturer’s written
permission. Violation of the above results in obligation to pay compensation. We
reserve the right to claim further damages.
2.3 Declaration of Conformity
The appliance meets the currently applicable standards and guidelines of the
European Union. We confirm the above in the EC Declaration of Conformity. We
may provide relevant Declaration of Conformity upon request.

Transport, Packaging and Storage
8 / 32 1583011
EN
3 Transport, Packaging and Storage
3.1 Delivery Check
Immediately upon reception, check the delivery for completeness and possible
shipping damage. In the case of visible transport damage refuse to accept the
appliance or accept it conditionally. Mark and note the scope of damage in shipping
documents/consignment list of the shipping company and lodge a complaint.
Concealed damage must be reported immediately upon its discovery, as
compensation claims may only be filed within applicable time limits.
If you find that parts or accessories missing, please contact our Customer Service
Department.
3.2 Packaging
Do not dispose of the appliance cardboard box. It may be used to store the
appliance when relocating or when shipping the appliance to our service point in the
case of any damages.
The packaging and its elements are made of recyclable materials. Particularly,
these are: plastic films and bags, cardboard box.
When disposing of the packaging, observe applicable domestic regulations.
Recyclable packaging materials should be recycled.
3.3 Storage
Leave the packaging closed until installation of the appliance; observe external
indications concerning method of placing and storage. Store the packaging in the
following conditions only:
–in closed rooms;
–in dry and dust-free surrounding;
–away from aggressive agents;
–in a location protected against sunlight;
–in a location protected against mechanical shocks.
In the case of extended storage (over three months), make sure you check the
condition of the packaging and the parts regularly. If needed, replace the packaging
with a new one.

Technical Data
1583011 9 / 32
EN
4 Technical Data
4.1 Technical Specifications
Name:
Gas stove Flex 7360
Art. No.:
1583011
Material:
stainless steel
Number of hobs:
6
Distribution of hobs, in kW:
3 x 3,5 / 3 x 6
Size of hobs, in mm:
330 x 300
Oven's thermal processing chamber
material:
stainless steel
Oven dimensions (W x D x H), in mm:
635 x 363 x 3520
Oven volume, in litres:
80
Temperature range, min.–max., in °C:
50 - 270
Gastronorm:
1/1 GN
Number of guide rail pairs:
4
Distance between guide rail pairs, in mm:
57
Oven connected load:
3 kW | 230 V | 50/60 Hz
Gas connected load:
28.5 kW
Base dimensions (W x D x H), in mm:
380 x 500 x 480
Height regulation, in mm:
100 - 160
Dimensions (W x D x H), in mm:
1.200 x 730 x 870
Weight, in kg:
90,4
We reserve the right to implement technical modifications.

Technical Data
10 / 32 1583011
EN
Version / Characteristics
•Type: standing appliance
•Operating mode: gas/electric
•Hob type: gas
•Gas type:
–natural gas, type G20 (20 mbar)
–natural gas nozzles G30 (50 mbar) included
•Gas burner: single-ring burner
•Ignition type: manual ignition
•Pilot flame: yes
•Oven type: electric
•Oven function: air circulation
•Oven characteristics: single-circuit heater
•Fume extractor: yes
•Base type: open
•Height-adjustable feet
•Height-adjustable: 100 x 160 mm
•Features:
–3 stainless steel sliding grates (each for 2 hobs)
–gas burner with ignition guard
–stainless steel handle
•The set includes: 1 rack

Technical Data
1583011 11 / 32
EN
Gas Pressure Table
Appliance
categories
Supply pressure
Destination country
II2H3+
20, 28-30/37 mbar
IT, ES, GB, GR, IE, PT, CZ, SK, CY,
CH, LT, SI, AL, MK, TR
II2E+3+
20/25, 28/37 mbar
FR, BE
II2E3B/P
20, 37 mbar
PL
II2E3B/P
20, 50 mbar
DE
II2H3B/P
20, 50 mbar
AT, CH, SK
II2H3B/P
20, 30 mbar
DK, SE, FI, SI, EE, LT, LV, NO, HR,
BG, TR, CY, GR, SK, AL, MK
II2E3B/P
20, 30 mbar
NL, RO
II2LL3B/P
20,050 mbar
DE
II2HS3B/P
25, 30 mbar
HU
I3B/P
30 mbar
MT, IS
II2EK3B/P
25, 30 mbar
NL
Table 1
Characteristics of burners and nozzles
Category
P [mbar]
G20 /
G25
G30-31
kW
3.5 kW (MAX,
including
pilot)
[1.5 kW (MIN,
including
pilot)]
6 kW (MAX,
including
pilot)
[1.8 kW (MIN,
including
pilot)]
PILOT
(0.24 kW)
Dim.
1/100 mm
1/100 mm
1/100 mm
II2H3+
II2E+3+
II2E3B/P
20
28..30 /
37
MAX
1,40 G20 /
0,90 G30-31
1,85 G20 /
1,20 G30-31
0,40 G20 /
0,21 G30-31
MIN
REG G20 /
0,50 G30-31
REG G20 /
0,60 G30-31
-
H
(mm)
8,00 G20 /
9,00 G30-31
3,00 G20 /
8,00 G30-31
-

Technical Data
12 / 32 1583011
EN
Category
P [mbar]
G20 /
G25
G30–31
kW
3.5 kW (MAX,
including
pilot)
[1.5 kW (MIN,
including
pilot)]
6 kW (MAX,
including
pilot)
[1.8 kW (MIN,
including
pilot)]
PILOT
(0.24 kW)
Dim.
1/100 mm
1/100 mm
1/100 mm
II2E3B/P
II2H3B/P
20
50
MAX
1,40 G20 /
0,80 G30-31
1,85 G20 /
1,20 G30-31
0,40 G20 /
0,21 G30-31
MIN
REG G20 /
0,50 G30-31
REG G20 /
0,60 G30-31
-
H
(mm)
8,00 G20 /
9,00 G30-31
3,00 G20 /
5,00 G30-31
-
II2H3B/P
II2E3B/P
20
30
MAX
1,40 G20 /
0,90 G30-31
1,85 G20 /
1,20 G30-31
0,40 G20 /
0,21 G30-31
MIN
REG G20 /
0,50 G30-31
REG G20 /
0,60 G30-31
-
H
(mm)
8,00 G20 /
9,00 G30-31
3,00 G20 /
8,00 G30-31
-
II2LL3B/P
20 (G25)
50
MAX
1,55 G25 /
0,80 G30-31
2,00 G25 /
1,05 G30-31
0,40 G20 /
0,21 G30-31
MIN
REG G25 /
0,50 G30-31
REG G25 /
0,60 G30-31
-
H
(mm)
4,00 G25 /
9,00 G30-31
2,00 G25 /
5,00 G30-31
-
II2HS3B/P
25
30
MAX
1,40 G20 /
0,90 G30-31
1,85 G20 /
1,20 G30-31
0,40 G20 /
0,21 G30-31
MIN
REG G20 /
0,50 G30-31
REG G20 /
0,60 G30-31
-
H
(mm)
8,00 G20 /
9,00 G30-31
3,00 G20 /
8,00 G30-31
-
IB/P
/
30
MAX
0,90
1,20
0,21
MIN
0,50
0,60
-
H
(mm)
9,00
8,00
-

Technical Data
1583011 13 / 32
EN
Category
P [mbar]
G20 /
G25
G30–31
kW
3.5 kW (MAX,
including
pilot)
[1.5 kW (MIN,
including
pilot)]
6 kW (MAX,
including
pilot)
[1.8 kW (MIN,
including
pilot)]
PILOT
(0.24 kW)
Dim.
1/100 mm
1/100 mm
1/100 mm
II2EK3B/P
25
(G25.3)
30
MAX
1,45 G25 /
0,90 G30-31
1,90 G25 /
1,20 G30-31
0,40 G20 /
0,21 G30-31
MIN
REG G25 /
0,50 G30-31
REG G25 /
0,60 G30-31
-
H
(mm)
4,00 G25 /
9,00 G30-31
2,00 G25 /
8,00 G30-31
-
II2L3B/P
20 (G25)
30
MAX
1,55 G25 /
0,90 G30-31
2,00 G25 /
1,20 G30-31
0,40 G20 /
0,21 G30-31
MIN
REG G25 /
0,50 G30-31
REG G25 /
0,60 G30-31
-
H
(mm)
4,00 G25 /
9,00 G30-31
2,00 G25 /
8,00 G30-31
-
Table 2
Gas consumption
Qn [kW]
28,5
Methane (G20) (Hi = 9.45 kWh/m3) m3/h
3,01
Methane (G25) (Hi = 8.125 kWh/m3) m3/h
3,51
GPL (G30) (Hi = 12.68 kWh/kg) kg/h
2,25
Table 3
4.2 Functions of the Appliance
Gas stove with 6 single-ring burners, sliding grate, pilot flame, electric oven and
open base is intended for preparation of suitable food (frying, cooking, stewing,
baking, etc.).

Technical Data
14 / 32 1583011
EN
4.3 List of Components of the Appliance
Cookware is not part of the delivery.
Fig. 1
1. Burner (6 pcs)
2. Sliding grates (3 pcs)
3. Fume extractor
4. Hob
5. Control panel
6. Open base structure
7. Height-adjustable feet (4 pcs)
8. Oven door handle
9. Oven door
10.Rack (1 pcs)
11.Guide rails
12.Oven's thermal processing chamber
13.Housing

Installation Instructions
1583011 15 / 32
EN
5 Installation Instructions
5.1 Installation
CAUTION!
Incorrect installation, positioning, operation, maintenance or misuse of
the appliance may lead to personal injury or property damage.
Positioning and installation, as well as repairs may be performed by
authorised technical service only and in compliance with the applicable
national law.
NOTE!
The manufacturer disclaims all liability and provides no warranty for
damages, which may be attributed to non-observance of regulations or
incorrect installation.
Observe all provisions of law, guidelines and regulations during installation:
–Regional or local safety regulations and construction law provisions
–Accident prevention acts in force
–Fire prevention provisions
–Respective IEC provisions
–DVGW G600 (TRGI), 'Technical regulations for gas installations'
–TRF, 'Technical regulations for liquid gas'
–Directive and regulations of a gas supplying company (EUV)
–DVGW G 634, 'Installation of commercial kitchen appliances for
combustion of gas fuels'
–Respective legal regulations
Preparation for Installation
•For these appliances are assigned to type A1 (no fixed connection with
building's chimney or installation under venting extractions or ceilings), it is very
important to provide for proper ventilation of the installation room. Instructions
provided in DVGW G634 sheet should be observed.
•A room, in which the appliance is installed, should contain the amount of air
necessary for burning gas according to regulations in force. For proper burning,
the required air inflow may not be lower than 2 m3/h per kW of appliance's rated

Installation Instructions
16 / 32 1583011
EN
power (see appliance's rated plate). Additionally, accident prevention
regulations should be observed.
•In spite of this, we recommend installing the appliance under an extractor hood,
so that fast and constant fume extraction is secured.
•The attested gas cut-off valve must be installed in an easily accessible location
between the gas supply installation and the appliance, so that, if needed, gas
supply may be interrupted at any time.
ATTENTION!
Circuit breakers and cut-off devices on site must be installed in direct
vicinity of the appliance and be easily accessible for the user.
Unpacking / Positioning
•Unpack the appliance, remove all external and internal packaging elements and
shipment safeguards.
CAUTION!
Choking hazard!
Prevent children from accessing package materials, for instance: plastic
bags and EPS.
•If the appliance is covered with a protective film, remove it. Remove the film
slowly, so no glue residues are left. Remove any glue residues with the use of a
suitable solvent.
•Be careful not to damage the rating plate and warning labels fixed on the
appliance.
•Never place the appliance in humid or wet environment.
•Place the appliance in a way making the connections easily accessible, so that
they may be quickly disconnected if such a need arises.
•The appliance should be placed on surfaces that are:
–even, with sufficient bearing capacity, resistant to water, dry and resistant
to high temperatures;
–sufficiently large, and thus enabling usage of the appliance with no
problems;
–easily accessible;
–well ventilated.
•Never place the appliance directly next to walls, furniture, or other objects made
of flammable materials. Maintain minimum clearance of 200 mm between side
and rear walls and the said objects and walls. Maintain clearance of at least

Installation Instructions
1583011 17 / 32
EN
600 mm between the appliance's surface and horizontal surfaces over the
appliance.
•If keeping the minimum clearance is not possible, walls should be isolated with
non-combustible, thermo-insulation materials (e.g., films made of heat resistant
materials, which may sustain temperature of at least 65°C). Follow fire
protection regulations in force.
•Maintain sufficient lateral clearance for service purposes should maintenance
and repair works be required.
•Before placing the appliance in the intended location, screw the heat-adjustable
feet in designated places at the bottom of the appliance.
•Compensate for smaller unevennesses of flooring in the place of installation
through screwing in and out of the height-adjustable feet.
5.2 Electrical Connection
•Electrical connection of the appliance to mains power supply must be executed
by a qualified electrician, according to international, national and local
regulations in force.
•Before connecting the appliance to mains power supply make sure that the
voltage and frequency values on the rating plate are conforming to the
parameters of local electric installation. The allowable voltage deviation is ±10%.
•The appliance is equipped with a 3x1.5 H07RN-F power cord and mains plug.
•According to international regulations, between the appliance and the mains
power supply there must be a multi-polar circuit breaker furnished, with opening
width of contacts of at least 3 mm per one pole (e.g. a fuse, S type installation
breaker, etc.).
•Unconditionally, the appliance must be grounded.
•The appliance must be connected to a potential equalization circuit (ground).
Connection clamp is located underneath the appliance, near right back leg and
is marked with a symbol of . The cord's diameter must be 10 mm2.

Installation Instructions
18 / 32 1583011
EN
5.3 Gas Connection
•Gas supply connection may be executed exclusively by a qualified gas fitter
according to the current regulations.
•Installation locations available in public should follow accident prevention
regulations and safety norms with respect to fire occurrences and panic.
•The appliance is approved and by factory default prepared to operate with the
type of gas stated on the rating plate. Before commencing installation, check if
local gas supply (gas type and pressure) is concurrent with the default setting of
the appliance.
•Depending on type of gas, the intersection of gas supply line must be selected
according to regulations in force and properly installed.
•The connection may be established as fixed or detachable; if flexible tubes are
used, they must be made of stainless steel, pursuant to DIN 3383 Part 1 or
3384.
•If threaded connections are used with sealants or sealing materials, they must
be tested and approved by DVGW.
•Gas connection stub is found at the back of the appliance, and is marked with
the symbol of .
•Make sure that gas connection line is protected against coming in contact with
hot elements of the oven.
•All connection points between the installation and the appliance must be subject
of tightness check. For gas line tightness check always use soap solution or a
special foaming agent for detecting leakages.
•Connection points should be covered with an agent —no air bubbles should be
produced. Also the gas cut-off valves should be subject of this check.
ATTENTION!
Do not use open fire to test tightness!