Basalte eve Pro 10.5" User manual

wall box
for Puck
178,5 mm/6.69
"
53 mm/2.09
"
277 mm/10.91
"
178 mm/7.01
"
98 mm/3.86
"
24 mm/0.94”
24 mm/0.94”
24 mm/0.94”
170 mm/7.03
"
45 mm/1.77
"
89 mm/
3.50
"
6
7
mounting the iPad Pro 10.5
"
removing the iPad Pro
10.5
"
a
a
a
a
b
b
b
b
3
5
10.5-inch iPad Pro
PSU
110
V
/230V
V/230VV
+v
+v
-v
-v
wall box
for Puck
Puck
openings for
mounting the frame
vertical
mounting
horizontal
mounting
vertical
mounting
horizontal
mounting
screws for
security version
tooltooltool
(included with(included with(included with
security version)security version)security version)
opening for speaker
magnet
magnet
opening for speaker
opening for microphone
lip
4
1
a
2
magnets
opening for microphone

Removing the iPad 10.5"
1. Remove the Eve cover.
2. Place one finger behind the iPad and another one on
the iPad as shown on the drawing 7 (a).
3. Gently pull the iPad out of the frame making sure it
cannot fall (b).
4. Remove the power connector.
Dimensions Eve Pro 10.5"
Set: 277mm/10.91" x 178mm/7.01" x 11mm/0.43"
_
Frame: 274mm/10.79"x 178mm/7.01” x 11mm/0.43"
Cover: 24mm/0.94"x 178mm/7.01” x 11mm/0.43"
Basalte bvba
Hundelgemsesteenweg 1a
9820 Merelbeke
Belgium
tel [phone]
[e-mail]
www.basalte.be
Basalte is a registered trademark of Basalte bvba.
Eve is a registered trademark of Basalte bvba.
Eve mini, Eve 9.7", Eve Pro 9.7" -10.5" & -12.9" and Eve touch
are registered designs of Basalte bvba.
iPad mini, iPad Air, iPad, iPad Pro and iPod touch are
registered trademarks of Apple Inc.
Made in Belgium
v1.0 2017 basalte©
Identification of the parts
a Eve Pro 10.5"frame for iPad Pro 10.5"(product number: 670-xx)
b Eve Pro 10.5"cover (product number: 672-xx, - not included)
c Eve Pro 10.5"cover security version (product number: 674-xx- not
included)
Positioning of the wall box (not included)
A wall box should be foreseen to install the iPad power supply.
The Puck (not included) is a USB power supply which fits into a
1-gang wall box and uses the standard Lightning-to-USB Cable,
supplied with the iPad.
The wall box should be installed according to the dimensions on
the drawing (2).
Direction of the frame
The Eve frame can be mounted horizontally or vertically.
Make sure to mount the iPad in the correct direction according
to the drawing. (3). Installing the frame in the wrong direction
can damage the iPad.
Puck power supply (not included - product number: 610-02)
Install the Puck in the wall box following the instructions of the
Puck manual. Connect the standard Lightning-to-USB Cable,
supplied with the iPad, to the Puck.
Installing the frame
Please use the correct openings of the Eve frame and ensure the
screws are positioned so that they cannot damage the iPad.
Mounting the iPad Pro 10.5"
1. Plug the power connector into the iPad.
2. Portrait mounting: Place the right side of the iPad in the right
side of the frame as shown on drawing 6 (a) . Then gently push
the iPad in the frame so that it is being held by the magnets (b).
Landscape mounting: Place the right side of the iPad in
the lower side of the frame as shown on drawing 6 (a). Then
gently push the iPad in the frame so that it is being held by the
magnets (b).
3. Place the Eve cover making sure that the cover is not squeezing
the power cable.
Make sure to follow the steps above in the right order as a
wrong installation can damage the frame.
1
2
3
4
5
6
7
Pro 10.5"