Basalte Eve Pro 11" User manual

5
6
2
4
iPad Pro 11
"
- 12
,
9
"
P
SU
11
0
V
/230V
V
V
+v
+v
-
v
-v
wall bo
x
for Puc
k
o
penin
g
s fo
r
m
ounting the fram
e
vertica
l
mount
i
n
g
h
o
riz
o
n
tal
mount
i
n
g
opening
f
or speake
r
ma
g
ne
t
openin
g
f
or speake
r
opening for microphone
3
1
a
2
182,50mm
/
7,1
9
"
wall box
for Puck
iPa
d
Pro 1
1
"
i
Pa
d
Pro 12,
9
"
91,25mm
/
3,5
9
"
55,80mm
/
2,2
0
"
2
59,60mm
/
10,2
2
"
218,90mm
/
8,6
2
"
109,45mm
/
4,3
1
"
wall box
for Puck
72,30mm
/
2,8
5
"
100mm
/
3,9
4
"
2
92,60mm
/
11,5
2
"
b
c
1
00mm
/
3,9
4
"

Removing the iPad Pro
1. Place the suction cup on the iPad screen and push
lightly to create suction.
2. Gently pull the iPad making sure it cannot fall.
3. Disconnect the power connector.
Basalte bvba
Hundelgemsesteenweg 1a
9820 Merelbeke
Belgium
tel [phone]
[e-mail]
www.basalte.be
Basalte is a registered trademark of Basalte bvba.
Eve is a registered trademark of Basalte bvba.
Eve mini, Eve 9.7", Eve Pro 9.7" -11" & -12.9" and Eve touch are
registered designs of Basalte bvba.
iPad mini, iPad Air, iPad, iPad Pro and iPod touch are
registered trademarks of Apple Inc.
Made in Belgium
v3.0 2019 basalte©
Identification of the parts
a Eve Pro 11"frame for iPad Pro (product number: 675-xx)
Eve Pro 12,9" frame for iPad Pro (product number: 655-xx)
b Custom USB-C cable
c Suction cup
Positioning of the wall box (not included)
A wall box should be foreseen to install the iPad power supply.
The Puck (not included) is a USB power supply which fits into a
1-gang wall box and uses the USB-C cable, supplied with the
iPad.
The wall box should be installed according to the dimensions on
the drawing (2).
Puck power supply (not included - product number: 610-02)
Install the Puck in the wall box following the instructions of the
Puck manual. Connect the USB-C cable, supplied with the Eve
frame to the Puck.
Installing the frame
Please use the correct openings of the Eve frame and ensure the
screws are positioned so that they cannot damage the iPad.
Mounting the iPad Pro
1. Plug the power connector into the iPad.
Make sure the USB-C cable is connected in proper
orientation. Inserting the cable in the wrong direction can
damage the iPad once you mount it in the Eve frame.
2. Place the iPad in the opening of the frame so that it is being
held by the magnets.
Make sure that the power cable is not squeezed between
the iPad and the frame.
1
2
3
4
5
6
Dimensions Eve Pro 11"
Frame: 259,60mm/10.22" x 182,5mm/7.19” x 10mm/0.39”
Dimensions Eve Pro 12,9”
Frame: 292,6mm/11.52”x 218,90mm/8.62” x 10mm/0.39”
pro
for iPad Pro 11” - 12,9”
11" - 12.9"