bathstore Optim Alpha User manual

Any Queries? Call : 08000 23 23 23
23
1
tools required
p
arts re
q
uired
Optim Alpha Radiator Installation Instruction
- review instructions carefully before installation
- installation should be completed by a suitably qualified person
- please dispose of packaging in a responsible manner
1a
1b
1c
2a
2b
3a
3b
3c
1 - 2 C

Any Queries? Call : 08000 23 23 23
45
4a
4b
5a
Maintenance...
• The outside of the towel warmer can be cleaned using warm soapy water.Do not use scouring powders
or acid based products as these could damage the finish.
• It is recommend than the unit should be drained if it not in use and ambient tenperatures are below
0°C(32°F) to prevent damage from the water freezing.Before reusing, flush system with a rust inhibitor
to remove any oxidization.
• If the water temperature in the system exceeds 50°C (122°F), please install a warning mark near
the radiator to avoid being scalded.
• If the product is not used for a prolonged period (for example spring,summer),ensure the radiator is
kept filled with water containing a rust inhibitor to prevent oxidization on the inside of the unit.
• This product should only be used with a maximum pressure of PN≤1MPa (10Kg/cm2,10Bar).
Only for use with water. Maximum temperature t≤100°C (212°F).
After installation ...
• Use a screwdriver to open the air vent, open the inlet valve and let the water rush into the radiator.
Check all connections for leaks.
• Once water overflows from the air vent, there is no air in the tube.
• Use a screwdriver to close the air vent. Turn on the outlet valve and the radiator is ready for use.
2 - 2 C