Bauhn AFTWS-0821 User manual
Display 1.69”, 240 x 280 pixels
Ingress protection IP67
Charging time 3 hrs (approx.)
Charging base
input 5V 180mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.8V 240mA
Weight 50g (approx.)
Dimensions (mm) 38.5 (W) x 43 (H) x 12.2 (D)
Specications
Smart Watch
with Interchangeable Straps
User Guide
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in workmanship
and parts for a period of 12 months from the date of purchase.
Defects that occur within this warranty period, under normal use
and care, will be repaired, replaced or refunded at our discretion,
solely at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and to compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners.
Unfortunately, sometimes faulty products are manufactured, which
need to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-
generated data (such as files stored on a computer hard drive,
telephone numbers stored on a mobile telephone, songs stored on
a portable media player, games saved on a games console or files
stored on a USB memory stick) during the process of repair, some
or all of your stored data may be lost. We recommend you save this
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we
may replace them with refurbished goods of the same type or use
refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only
used where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily,
you may escalate your complaint. Please telephone us on 1300 002
534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 8977 3765
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: [email protected]
NOTE: The results and measurements of heart rate, blood
pressure and blood oxygen data cannot be used for medical
reference and should be used as a guide only.
Warranty returns
Should you for any reason need to return this product for a
warranty claim, make sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our After
Sales Support Centre on 1300 002 534.
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
Shortcuts menu
Watch Face Screen
Tap “Dial switch” in the settings menu. Swipe left/right for different
watch face options, then tap the screen again to conrm selection.
You can change the style of the watch face on the Da Fit app. Go to
the watch faces menu on the app, then tap on the desired design
and the watch will display the selected face.
Swipe down to access the shortcut menu
where you can adjust:
• Brightness
• Settings
• Weather
• Menu style
• Info
• Bluetooth call
Language
On the Da Fit app, go to the “Others” menu and change to the
desired language.
Notication
Swipe up to display notication and messages. On the Da Fit app,
tap “notications” to enable messages and notication alerts.
Sedentary Reminder
On the Da Fit app, go to the “others” menu and set “Remind to
move”on. The watch will alert you from 10am to 10pm.
Drink Water Reminder
On the Da Fit app, go to the “others” menu and turn “Drink water
reminder” on. Set the start timer and drinking interval as desired.
The watch will remind you each interval.
Camera (Remote Capture)
On the Da Fit app, tap on “shutter” to use the watch as a camera
remote for your smart phone (ensure the app is connected to your
watch). Tap the watch screen to remotely take a photo.
Weather
On the main menu, tap on the icon to display the weather. You
must be connected to the Da Fit app for the function to work. On
the app, go to the “Others “ menu and turn weather on and type in
your city. You must have internet/mobile connection and your smart
phones location/GPS must be turned on.
NOTE: For Android devices, when using Bluetooth music
playback, camera and weather:
Go to the app info>set “allow background activity” to on.
Go to the app info>battery usage>battery optimisation. Select
“not optimised.”
Please see the “Background Operation Protection Guide” on the
Da Fit app for more detail.
10 11 12 139
Change The Straps
The watch comes with an additional strap for
when you want to switch up the styling.
To change the straps, turn the watch over and
push the needle knobs to the direction as shown
in the illustration.
Take off the straps and t the new strap.
Da Fit App
Search for the Da Fit app in the app store to
download, or scan the QR code below for installation.
Turn on the Watch
Once the watch is fully charged, press and hold the side button for
3 seconds to turn on the watch.
To turn off the watch, press and hold the side button for 3
seconds.
Connect to the App
Open the Da Fit app on your smart phone. Tap the icon then
“Add A Device” and it will automatically start to search for nearby
devices. On the device list, select “AFTWS0821” to connect to the
watch. You need to tap on “Pair” on a pop up window.
Go to your App info>set “allow background activity” to On. Go
to your App info>Battery usage>Battery optimisation. Select
“not optimised”. For details, please see “Background Operation
Protection Guide” on Da Fit app my menu for different mobile
models.
Disconnect from the App
For both iOS and Android devices, open the Da Fit app on
your smart phone. Tap on the icon then select “REMOVE” to
disconnect the watch from the app. You will also need to open the
Settings menu on your smart phone.
Go to Bluetooth settings, tap on the “i” (for iOS) icon on the right
side of “Audio_AFTWS0821/AFTWS0821” and then tap “Forget
This Device” to nish disconnecting.
Turn On the Screen
To turn on the screen, raise your arm if you’re wearing the watch,
or press the side button. Press the button again to turn off the
screen. Press the side button on any screen or swipe right to exit
or return to the main screen. Raising your arm too quickly or slowly
may not turn the screen on.
NOTE: ON Da Fit app, go to “others” menu and set “Quick View”
on to enable Raise your arm screen on.
1. Touch screen
2. Side button
Parts of the watch
First Time Use
Charge your watch before using for the rst time, you will need to
charge it for about 3 hours.
Charging steps:
1. Place the watch on top of the base with the charging pins on
the back of the watch aligned with the charging pins on the
charging dock. It will snap into position once correctly aligned.
2. Connect the charging dock to a USB charging adaptor (not
included) or a USB port on your computer.
3. Once fully charged, unplug the charging dock from the charger.
To keep the charging pins clean, please use a damp cloth and
gently clean the charging pins weekly.
Google Play and the Google Play logo are trademarks of Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries and regions. App Store is a service mark of Apple Inc.
Functions On the Home Screen
• Swipe right to get to the main menu. From here, swipe the
screen to display the different menus and settings. Tap the
respective icon to enter these.
• Swipe left for quick app access to Pedometer, Sleep Monitor,
Heart Rate, Bluetooth Calls, Weather, Blood Pressure and
Oxygen monitoring.
• Swipe up for the notications screen then swipe down to
return to the main screen.
• Swipe down to enter the shortcut menu. Tap the brightness
bar to adjust screen brightness.
Functions in any Screen
• Swipe right or press the side button to return to the main
screen.
• Tap on any icon to get into the sub screen.
Applications
Please allow permission and enable the notication settings on the
respective smart phone application.
Set up Bluetooth Calling
To enable the watch for your smart phone’s Bluetooth calls, music
playback and remote capture, please refer to the below:
Tap the icon at settings menu or tap the icon at the
shortcut menu to turn Bluetooth call function on.
Tap the icon on the main menu or swipe left to enter the
Bluetooth call menu where you can view call record contact list and
dial pad.
Tap the icon to reset the Bluetooth call.
3. Charging pins
4. Heart rate sensor
11
22
33
44
NOTE: The images in this guide are for reference only. Your watch
may be a different colour.
For Android devices: Go to your mobile settings>Bluetooth.
Select “+ Pair new device” and select “Audio_AFTWS0821” from
the list, or tap on “Pair” on a pop-up window if it appears.
Once successfully connected, will light up on the shortcut
menu.
For iOS devices: Go to your mobile settings>Bluetooth. Select
“Add new device” and select “AFTWS0821” from the list.
Once successfully connected, will light up on the shortcut
menu. Then select “Audio_AFTWS0821” from the Bluetooth
setting menu.
NOTE: For iOS devices, music playback and remote capture
functions will not work if you do not pair “Audio_AFTWS0821” on
the Bluetooth settings menu. The watch will notify you to connect to
your smart phone if not connected. Your smart phones Bluetooth
must be paired to
“Audio_AFTWS0821/AFTWS0821” to use the function.
Call Operation
After your smart phone is connected to the watch, you can directly
answer/reject incoming calls through the watch. To answer an
incoming call, tap the icon. To reject the call, tap the icon.
Bluetooth Music Playback
• Tap the icon to enter the Bluetooth music playback menu.
• Open your smart phones music app.
• Tap icon to play/pause music.
• Tap / icon to play the previous/next song.
NOTE: Your smart phones Bluetooth must be connected to
“Audio_AFTWS0821/AFTWS0821” to use the function. This
function will only work once connected to the Da Fit app.
For Android For iOS
Outdoor Running
On the Da Fit app, select “Outdoor running”. The app will record
your smart phones GPS data and display on the map.
You must have internet/mobile connection for the function to
work. Your location/GPS must also be turned on.
Exercise
On the main menu, tap the icon to enter the exercise/sports
interface.
There are 8 activities: walking, running, cycling, skipping,
badminton, basketball, football and swimming.
Swipe right to display the stop/pause icon. Tap the icon to pause/
stop. Swipe left to resume activity.
Tap the icon to exit and save the activity.
The smart watch will only save activity data if the distance is more
than 200 steps and 5 minutes in duration.
Heart Rate
On the main menu, tap the icon then tap the screen to start
measuring your heart rate. Data for the last 7 measurements will
be synced to the Da Fit app once connected.
Continuous Heart Rate Detection
On the Da Fit app, go to the “others” menu and set “Continuous
Heart Rate Detection”on. The app will continuously record your
heart rate.
Blood Pressure
On the main menu, tap the icon then tap the screen to start
measuring your blood pressure levels. The watch will vibrate once
measurement has nished and the data will be displayed. Data
for the last 7 measurements will be synced to the Da Fit app once
connected.
Blood Oxygen
On the main menu, tap the icon then tap the screen
to start measuring your blood oxygen levels. Data for the
last 7 measurements will be synced to the Da Fit app once
connected.
When using the heart rate, blood pressure and blood oxygen
functions, ensure the following:
• The smart watch has good contact with your wrist.
• Check that the sensor is clean and there is no dirt or
debris covering it.
• It may take over 30 seconds before the rst result is shown
on the screen.
Sleep Monitor
On the main menu, tap on the icon to enter the Sleep
interface. You can track your sleep pattern and view more
detailed records on your smart phone once connected to the
Da Fit app.
NOTE: You must be wearing the watch during the sleep
duration for the function to work.
Activity
On the main menu, tap on the icon to enter the Activity
interface. The watch will track the number of steps taken,
calories burnt and distance travelled.
Set Alarm
You can set alarms on the Da Fit app and sychronise to the
watch. On the app, turn “alarm” on and set desired time. You
can set up to 3 alarms. The watch will vibrate during the set
alarm.
2 3 4 5 6 7 8
Change The Straps
The watch comes with an additional strap for
when you want to switch up the styling.
To change the straps, turn the watch over and
push the needle knobs to the direction as shown
in the illustration.
Take off the straps and t the new strap.
Da Fit App
Search for the Da Fit app in the app store to
download, or scan the QR code below for installation.
Turn on the Watch
Once the watch is fully charged, press and hold the side button for
3 seconds to turn on the watch.
To turn off the watch, press and hold the side button for 3
seconds.
Connect to the App
Open the Da Fit app on your smart phone. Tap the icon then
“Add A Device” and it will automatically start to search for nearby
devices. On the device list, select “AFTWS0821” to connect to the
watch. You need to tap on “Pair” on a pop up window.
Go to your App info>set “allow background activity” to On. Go
to your App info>Battery usage>Battery optimisation. Select
“not optimised”. For details, please see “Background Operation
Protection Guide” on Da Fit app my menu for different mobile
models.
Disconnect from the App
For both iOS and Android devices, open the Da Fit app on
your smart phone. Tap on the icon then select “REMOVE” to
disconnect the watch from the app. You will also need to open the
Settings menu on your smart phone.
Go to Bluetooth settings, tap on the “i” (for iOS) icon on the right
side of “Audio_AFTWS0821/AFTWS0821” and then tap “Forget
This Device” to nish disconnecting.
Turn On the Screen
To turn on the screen, raise your arm if you’re wearing the watch,
or press the side button. Press the button again to turn off the
screen. Press the side button on any screen or swipe right to exit
or return to the main screen. Raising your arm too quickly or slowly
may not turn the screen on.
NOTE: ON Da Fit app, go to “others” menu and set “Quick View”
on to enable Raise your arm screen on.
1. Touch screen
2. Side button
Parts of the watch
First Time Use
Charge your watch before using for the rst time, you will need to
charge it for about 3 hours.
Charging steps:
1. Place the watch on top of the base with the charging pins on
the back of the watch aligned with the charging pins on the
charging dock. It will snap into position once correctly aligned.
2. Connect the charging dock to a USB charging adaptor (not
included) or a USB port on your computer.
3. Once fully charged, unplug the charging dock from the charger.
To keep the charging pins clean, please use a damp cloth and
gently clean the charging pins weekly.
Google Play and the Google Play logo are trademarks of Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries and regions. App Store is a service mark of Apple Inc.
Functions On the Home Screen
• Swipe right to get to the main menu. From here, swipe the
screen to display the different menus and settings. Tap the
respective icon to enter these.
• Swipe left for quick app access to Pedometer, Sleep Monitor,
Heart Rate, Bluetooth Calls, Weather, Blood Pressure and
Oxygen monitoring.
• Swipe up for the notications screen then swipe down to
return to the main screen.
• Swipe down to enter the shortcut menu. Tap the brightness
bar to adjust screen brightness.
Functions in any Screen
• Swipe right or press the side button to return to the main
screen.
• Tap on any icon to get into the sub screen.
Applications
Please allow permission and enable the notication settings on the
respective smart phone application.
Set up Bluetooth Calling
To enable the watch for your smart phone’s Bluetooth calls, music
playback and remote capture, please refer to the below:
Tap the icon at settings menu or tap the icon at the
shortcut menu to turn Bluetooth call function on.
Tap the icon on the main menu or swipe left to enter the
Bluetooth call menu where you can view call record contact list and
dial pad.
Tap the icon to reset the Bluetooth call.
3. Charging pins
4. Heart rate sensor
11
22
33
44
NOTE: The images in this guide are for reference only. Your watch
may be a different colour.
For Android devices: Go to your mobile settings>Bluetooth.
Select “+ Pair new device” and select “Audio_AFTWS0821” from
the list, or tap on “Pair” on a pop-up window if it appears.
Once successfully connected, will light up on the shortcut
menu.
For iOS devices: Go to your mobile settings>Bluetooth. Select
“Add new device” and select “AFTWS0821” from the list.
Once successfully connected, will light up on the shortcut
menu. Then select “Audio_AFTWS0821” from the Bluetooth
setting menu.
NOTE: For iOS devices, music playback and remote capture
functions will not work if you do not pair “Audio_AFTWS0821” on
the Bluetooth settings menu. The watch will notify you to connect to
your smart phone if not connected. Your smart phones Bluetooth
must be paired to
“Audio_AFTWS0821/AFTWS0821” to use the function.
Call Operation
After your smart phone is connected to the watch, you can directly
answer/reject incoming calls through the watch. To answer an
incoming call, tap the icon. To reject the call, tap the icon.
Bluetooth Music Playback
• Tap the icon to enter the Bluetooth music playback menu.
• Open your smart phones music app.
• Tap icon to play/pause music.
• Tap / icon to play the previous/next song.
NOTE: Your smart phones Bluetooth must be connected to
“Audio_AFTWS0821/AFTWS0821” to use the function. This
function will only work once connected to the Da Fit app.
For Android For iOS
Outdoor Running
On the Da Fit app, select “Outdoor running”. The app will record
your smart phones GPS data and display on the map.
You must have internet/mobile connection for the function to
work. Your location/GPS must also be turned on.
Exercise
On the main menu, tap the icon to enter the exercise/sports
interface.
There are 8 activities: walking, running, cycling, skipping,
badminton, basketball, football and swimming.
Swipe right to display the stop/pause icon. Tap the icon to pause/
stop. Swipe left to resume activity.
Tap the icon to exit and save the activity.
The smart watch will only save activity data if the distance is more
than 200 steps and 5 minutes in duration.
Heart Rate
On the main menu, tap the icon then tap the screen to start
measuring your heart rate. Data for the last 7 measurements will
be synced to the Da Fit app once connected.
Continuous Heart Rate Detection
On the Da Fit app, go to the “others” menu and set “Continuous
Heart Rate Detection”on. The app will continuously record your
heart rate.
Blood Pressure
On the main menu, tap the icon then tap the screen to start
measuring your blood pressure levels. The watch will vibrate once
measurement has nished and the data will be displayed. Data
for the last 7 measurements will be synced to the Da Fit app once
connected.
Blood Oxygen
On the main menu, tap the icon then tap the screen
to start measuring your blood oxygen levels. Data for the
last 7 measurements will be synced to the Da Fit app once
connected.
When using the heart rate, blood pressure and blood oxygen
functions, ensure the following:
• The smart watch has good contact with your wrist.
• Check that the sensor is clean and there is no dirt or
debris covering it.
• It may take over 30 seconds before the rst result is shown
on the screen.
Sleep Monitor
On the main menu, tap on the icon to enter the Sleep
interface. You can track your sleep pattern and view more
detailed records on your smart phone once connected to the
Da Fit app.
NOTE: You must be wearing the watch during the sleep
duration for the function to work.
Activity
On the main menu, tap on the icon to enter the Activity
interface. The watch will track the number of steps taken,
calories burnt and distance travelled.
Set Alarm
You can set alarms on the Da Fit app and sychronise to the
watch. On the app, turn “alarm” on and set desired time. You
can set up to 3 alarms. The watch will vibrate during the set
alarm.
2 3 4 5 6 7 8
Change The Straps
The watch comes with an additional strap for
when you want to switch up the styling.
To change the straps, turn the watch over and
push the needle knobs to the direction as shown
in the illustration.
Take off the straps and t the new strap.
Da Fit App
Search for the Da Fit app in the app store to
download, or scan the QR code below for installation.
Turn on the Watch
Once the watch is fully charged, press and hold the side button for
3 seconds to turn on the watch.
To turn off the watch, press and hold the side button for 3
seconds.
Connect to the App
Open the Da Fit app on your smart phone. Tap the icon then
“Add A Device” and it will automatically start to search for nearby
devices. On the device list, select “AFTWS0821” to connect to the
watch. You need to tap on “Pair” on a pop up window.
Go to your App info>set “allow background activity” to On. Go
to your App info>Battery usage>Battery optimisation. Select
“not optimised”. For details, please see “Background Operation
Protection Guide” on Da Fit app my menu for different mobile
models.
Disconnect from the App
For both iOS and Android devices, open the Da Fit app on
your smart phone. Tap on the icon then select “REMOVE” to
disconnect the watch from the app. You will also need to open the
Settings menu on your smart phone.
Go to Bluetooth settings, tap on the “i” (for iOS) icon on the right
side of “Audio_AFTWS0821/AFTWS0821” and then tap “Forget
This Device” to nish disconnecting.
Turn On the Screen
To turn on the screen, raise your arm if you’re wearing the watch,
or press the side button. Press the button again to turn off the
screen. Press the side button on any screen or swipe right to exit
or return to the main screen. Raising your arm too quickly or slowly
may not turn the screen on.
NOTE: ON Da Fit app, go to “others” menu and set “Quick View”
on to enable Raise your arm screen on.
1. Touch screen
2. Side button
Parts of the watch
First Time Use
Charge your watch before using for the rst time, you will need to
charge it for about 3 hours.
Charging steps:
1. Place the watch on top of the base with the charging pins on
the back of the watch aligned with the charging pins on the
charging dock. It will snap into position once correctly aligned.
2. Connect the charging dock to a USB charging adaptor (not
included) or a USB port on your computer.
3. Once fully charged, unplug the charging dock from the charger.
To keep the charging pins clean, please use a damp cloth and
gently clean the charging pins weekly.
Google Play and the Google Play logo are trademarks of Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries and regions. App Store is a service mark of Apple Inc.
Functions On the Home Screen
• Swipe right to get to the main menu. From here, swipe the
screen to display the different menus and settings. Tap the
respective icon to enter these.
• Swipe left for quick app access to Pedometer, Sleep Monitor,
Heart Rate, Bluetooth Calls, Weather, Blood Pressure and
Oxygen monitoring.
• Swipe up for the notications screen then swipe down to
return to the main screen.
• Swipe down to enter the shortcut menu. Tap the brightness
bar to adjust screen brightness.
Functions in any Screen
• Swipe right or press the side button to return to the main
screen.
• Tap on any icon to get into the sub screen.
Applications
Please allow permission and enable the notication settings on the
respective smart phone application.
Set up Bluetooth Calling
To enable the watch for your smart phone’s Bluetooth calls, music
playback and remote capture, please refer to the below:
Tap the icon at settings menu or tap the icon at the
shortcut menu to turn Bluetooth call function on.
Tap the icon on the main menu or swipe left to enter the
Bluetooth call menu where you can view call record contact list and
dial pad.
Tap the icon to reset the Bluetooth call.
3. Charging pins
4. Heart rate sensor
11
22
33
44
NOTE: The images in this guide are for reference only. Your watch
may be a different colour.
For Android devices: Go to your mobile settings>Bluetooth.
Select “+ Pair new device” and select “Audio_AFTWS0821” from
the list, or tap on “Pair” on a pop-up window if it appears.
Once successfully connected, will light up on the shortcut
menu.
For iOS devices: Go to your mobile settings>Bluetooth. Select
“Add new device” and select “AFTWS0821” from the list.
Once successfully connected, will light up on the shortcut
menu. Then select “Audio_AFTWS0821” from the Bluetooth
setting menu.
NOTE: For iOS devices, music playback and remote capture
functions will not work if you do not pair “Audio_AFTWS0821” on
the Bluetooth settings menu. The watch will notify you to connect to
your smart phone if not connected. Your smart phones Bluetooth
must be paired to
“Audio_AFTWS0821/AFTWS0821” to use the function.
Call Operation
After your smart phone is connected to the watch, you can directly
answer/reject incoming calls through the watch. To answer an
incoming call, tap the icon. To reject the call, tap the icon.
Bluetooth Music Playback
• Tap the icon to enter the Bluetooth music playback menu.
• Open your smart phones music app.
• Tap icon to play/pause music.
• Tap / icon to play the previous/next song.
NOTE: Your smart phones Bluetooth must be connected to
“Audio_AFTWS0821/AFTWS0821” to use the function. This
function will only work once connected to the Da Fit app.
For Android For iOS
Outdoor Running
On the Da Fit app, select “Outdoor running”. The app will record
your smart phones GPS data and display on the map.
You must have internet/mobile connection for the function to
work. Your location/GPS must also be turned on.
Exercise
On the main menu, tap the icon to enter the exercise/sports
interface.
There are 8 activities: walking, running, cycling, skipping,
badminton, basketball, football and swimming.
Swipe right to display the stop/pause icon. Tap the icon to pause/
stop. Swipe left to resume activity.
Tap the icon to exit and save the activity.
The smart watch will only save activity data if the distance is more
than 200 steps and 5 minutes in duration.
Heart Rate
On the main menu, tap the icon then tap the screen to start
measuring your heart rate. Data for the last 7 measurements will
be synced to the Da Fit app once connected.
Continuous Heart Rate Detection
On the Da Fit app, go to the “others” menu and set “Continuous
Heart Rate Detection”on. The app will continuously record your
heart rate.
Blood Pressure
On the main menu, tap the icon then tap the screen to start
measuring your blood pressure levels. The watch will vibrate once
measurement has nished and the data will be displayed. Data
for the last 7 measurements will be synced to the Da Fit app once
connected.
Blood Oxygen
On the main menu, tap the icon then tap the screen
to start measuring your blood oxygen levels. Data for the
last 7 measurements will be synced to the Da Fit app once
connected.
When using the heart rate, blood pressure and blood oxygen
functions, ensure the following:
• The smart watch has good contact with your wrist.
• Check that the sensor is clean and there is no dirt or
debris covering it.
• It may take over 30 seconds before the rst result is shown
on the screen.
Sleep Monitor
On the main menu, tap on the icon to enter the Sleep
interface. You can track your sleep pattern and view more
detailed records on your smart phone once connected to the
Da Fit app.
NOTE: You must be wearing the watch during the sleep
duration for the function to work.
Activity
On the main menu, tap on the icon to enter the Activity
interface. The watch will track the number of steps taken,
calories burnt and distance travelled.
Set Alarm
You can set alarms on the Da Fit app and sychronise to the
watch. On the app, turn “alarm” on and set desired time. You
can set up to 3 alarms. The watch will vibrate during the set
alarm.
2 3 4 5 6 7 8
Change The Straps
The watch comes with an additional strap for
when you want to switch up the styling.
To change the straps, turn the watch over and
push the needle knobs to the direction as shown
in the illustration.
Take off the straps and t the new strap.
Da Fit App
Search for the Da Fit app in the app store to
download, or scan the QR code below for installation.
Turn on the Watch
Once the watch is fully charged, press and hold the side button for
3 seconds to turn on the watch.
To turn off the watch, press and hold the side button for 3
seconds.
Connect to the App
Open the Da Fit app on your smart phone. Tap the icon then
“Add A Device” and it will automatically start to search for nearby
devices. On the device list, select “AFTWS0821” to connect to the
watch. You need to tap on “Pair” on a pop up window.
Go to your App info>set “allow background activity” to On. Go
to your App info>Battery usage>Battery optimisation. Select
“not optimised”. For details, please see “Background Operation
Protection Guide” on Da Fit app my menu for different mobile
models.
Disconnect from the App
For both iOS and Android devices, open the Da Fit app on
your smart phone. Tap on the icon then select “REMOVE” to
disconnect the watch from the app. You will also need to open the
Settings menu on your smart phone.
Go to Bluetooth settings, tap on the “i” (for iOS) icon on the right
side of “Audio_AFTWS0821/AFTWS0821” and then tap “Forget
This Device” to nish disconnecting.
Turn On the Screen
To turn on the screen, raise your arm if you’re wearing the watch,
or press the side button. Press the button again to turn off the
screen. Press the side button on any screen or swipe right to exit
or return to the main screen. Raising your arm too quickly or slowly
may not turn the screen on.
NOTE: ON Da Fit app, go to “others” menu and set “Quick View”
on to enable Raise your arm screen on.
1. Touch screen
2. Side button
Parts of the watch
First Time Use
Charge your watch before using for the rst time, you will need to
charge it for about 3 hours.
Charging steps:
1. Place the watch on top of the base with the charging pins on
the back of the watch aligned with the charging pins on the
charging dock. It will snap into position once correctly aligned.
2. Connect the charging dock to a USB charging adaptor (not
included) or a USB port on your computer.
3. Once fully charged, unplug the charging dock from the charger.
To keep the charging pins clean, please use a damp cloth and
gently clean the charging pins weekly.
Google Play and the Google Play logo are trademarks of Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries and regions. App Store is a service mark of Apple Inc.
Functions On the Home Screen
• Swipe right to get to the main menu. From here, swipe the
screen to display the different menus and settings. Tap the
respective icon to enter these.
• Swipe left for quick app access to Pedometer, Sleep Monitor,
Heart Rate, Bluetooth Calls, Weather, Blood Pressure and
Oxygen monitoring.
• Swipe up for the notications screen then swipe down to
return to the main screen.
• Swipe down to enter the shortcut menu. Tap the brightness
bar to adjust screen brightness.
Functions in any Screen
• Swipe right or press the side button to return to the main
screen.
• Tap on any icon to get into the sub screen.
Applications
Please allow permission and enable the notication settings on the
respective smart phone application.
Set up Bluetooth Calling
To enable the watch for your smart phone’s Bluetooth calls, music
playback and remote capture, please refer to the below:
Tap the icon at settings menu or tap the icon at the
shortcut menu to turn Bluetooth call function on.
Tap the icon on the main menu or swipe left to enter the
Bluetooth call menu where you can view call record contact list and
dial pad.
Tap the icon to reset the Bluetooth call.
3. Charging pins
4. Heart rate sensor
11
22
33
44
NOTE: The images in this guide are for reference only. Your watch
may be a different colour.
For Android devices: Go to your mobile settings>Bluetooth.
Select “+ Pair new device” and select “Audio_AFTWS0821” from
the list, or tap on “Pair” on a pop-up window if it appears.
Once successfully connected, will light up on the shortcut
menu.
For iOS devices: Go to your mobile settings>Bluetooth. Select
“Add new device” and select “AFTWS0821” from the list.
Once successfully connected, will light up on the shortcut
menu. Then select “Audio_AFTWS0821” from the Bluetooth
setting menu.
NOTE: For iOS devices, music playback and remote capture
functions will not work if you do not pair “Audio_AFTWS0821” on
the Bluetooth settings menu. The watch will notify you to connect to
your smart phone if not connected. Your smart phones Bluetooth
must be paired to
“Audio_AFTWS0821/AFTWS0821” to use the function.
Call Operation
After your smart phone is connected to the watch, you can directly
answer/reject incoming calls through the watch. To answer an
incoming call, tap the icon. To reject the call, tap the icon.
Bluetooth Music Playback
• Tap the icon to enter the Bluetooth music playback menu.
• Open your smart phones music app.
• Tap icon to play/pause music.
• Tap / icon to play the previous/next song.
NOTE: Your smart phones Bluetooth must be connected to
“Audio_AFTWS0821/AFTWS0821” to use the function. This
function will only work once connected to the Da Fit app.
For Android For iOS
Outdoor Running
On the Da Fit app, select “Outdoor running”. The app will record
your smart phones GPS data and display on the map.
You must have internet/mobile connection for the function to
work. Your location/GPS must also be turned on.
Exercise
On the main menu, tap the icon to enter the exercise/sports
interface.
There are 8 activities: walking, running, cycling, skipping,
badminton, basketball, football and swimming.
Swipe right to display the stop/pause icon. Tap the icon to pause/
stop. Swipe left to resume activity.
Tap the icon to exit and save the activity.
The smart watch will only save activity data if the distance is more
than 200 steps and 5 minutes in duration.
Heart Rate
On the main menu, tap the icon then tap the screen to start
measuring your heart rate. Data for the last 7 measurements will
be synced to the Da Fit app once connected.
Continuous Heart Rate Detection
On the Da Fit app, go to the “others” menu and set “Continuous
Heart Rate Detection”on. The app will continuously record your
heart rate.
Blood Pressure
On the main menu, tap the icon then tap the screen to start
measuring your blood pressure levels. The watch will vibrate once
measurement has nished and the data will be displayed. Data
for the last 7 measurements will be synced to the Da Fit app once
connected.
Blood Oxygen
On the main menu, tap the icon then tap the screen
to start measuring your blood oxygen levels. Data for the
last 7 measurements will be synced to the Da Fit app once
connected.
When using the heart rate, blood pressure and blood oxygen
functions, ensure the following:
• The smart watch has good contact with your wrist.
• Check that the sensor is clean and there is no dirt or
debris covering it.
• It may take over 30 seconds before the rst result is shown
on the screen.
Sleep Monitor
On the main menu, tap on the icon to enter the Sleep
interface. You can track your sleep pattern and view more
detailed records on your smart phone once connected to the
Da Fit app.
NOTE: You must be wearing the watch during the sleep
duration for the function to work.
Activity
On the main menu, tap on the icon to enter the Activity
interface. The watch will track the number of steps taken,
calories burnt and distance travelled.
Set Alarm
You can set alarms on the Da Fit app and sychronise to the
watch. On the app, turn “alarm” on and set desired time. You
can set up to 3 alarms. The watch will vibrate during the set
alarm.
2 3 4 5 6 7 8
Change The Straps
The watch comes with an additional strap for
when you want to switch up the styling.
To change the straps, turn the watch over and
push the needle knobs to the direction as shown
in the illustration.
Take off the straps and t the new strap.
Da Fit App
Search for the Da Fit app in the app store to
download, or scan the QR code below for installation.
Turn on the Watch
Once the watch is fully charged, press and hold the side button for
3 seconds to turn on the watch.
To turn off the watch, press and hold the side button for 3
seconds.
Connect to the App
Open the Da Fit app on your smart phone. Tap the icon then
“Add A Device” and it will automatically start to search for nearby
devices. On the device list, select “AFTWS0821” to connect to the
watch. You need to tap on “Pair” on a pop up window.
Go to your App info>set “allow background activity” to On. Go
to your App info>Battery usage>Battery optimisation. Select
“not optimised”. For details, please see “Background Operation
Protection Guide” on Da Fit app my menu for different mobile
models.
Disconnect from the App
For both iOS and Android devices, open the Da Fit app on
your smart phone. Tap on the icon then select “REMOVE” to
disconnect the watch from the app. You will also need to open the
Settings menu on your smart phone.
Go to Bluetooth settings, tap on the “i” (for iOS) icon on the right
side of “Audio_AFTWS0821/AFTWS0821” and then tap “Forget
This Device” to nish disconnecting.
Turn On the Screen
To turn on the screen, raise your arm if you’re wearing the watch,
or press the side button. Press the button again to turn off the
screen. Press the side button on any screen or swipe right to exit
or return to the main screen. Raising your arm too quickly or slowly
may not turn the screen on.
NOTE: ON Da Fit app, go to “others” menu and set “Quick View”
on to enable Raise your arm screen on.
1. Touch screen
2. Side button
Parts of the watch
First Time Use
Charge your watch before using for the rst time, you will need to
charge it for about 3 hours.
Charging steps:
1. Place the watch on top of the base with the charging pins on
the back of the watch aligned with the charging pins on the
charging dock. It will snap into position once correctly aligned.
2. Connect the charging dock to a USB charging adaptor (not
included) or a USB port on your computer.
3. Once fully charged, unplug the charging dock from the charger.
To keep the charging pins clean, please use a damp cloth and
gently clean the charging pins weekly.
Google Play and the Google Play logo are trademarks of Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries and regions. App Store is a service mark of Apple Inc.
Functions On the Home Screen
• Swipe right to get to the main menu. From here, swipe the
screen to display the different menus and settings. Tap the
respective icon to enter these.
• Swipe left for quick app access to Pedometer, Sleep Monitor,
Heart Rate, Bluetooth Calls, Weather, Blood Pressure and
Oxygen monitoring.
• Swipe up for the notications screen then swipe down to
return to the main screen.
• Swipe down to enter the shortcut menu. Tap the brightness
bar to adjust screen brightness.
Functions in any Screen
• Swipe right or press the side button to return to the main
screen.
• Tap on any icon to get into the sub screen.
Applications
Please allow permission and enable the notication settings on the
respective smart phone application.
Set up Bluetooth Calling
To enable the watch for your smart phone’s Bluetooth calls, music
playback and remote capture, please refer to the below:
Tap the icon at settings menu or tap the icon at the
shortcut menu to turn Bluetooth call function on.
Tap the icon on the main menu or swipe left to enter the
Bluetooth call menu where you can view call record contact list and
dial pad.
Tap the icon to reset the Bluetooth call.
3. Charging pins
4. Heart rate sensor
11
22
33
44
NOTE: The images in this guide are for reference only. Your watch
may be a different colour.
For Android devices: Go to your mobile settings>Bluetooth.
Select “+ Pair new device” and select “Audio_AFTWS0821” from
the list, or tap on “Pair” on a pop-up window if it appears.
Once successfully connected, will light up on the shortcut
menu.
For iOS devices: Go to your mobile settings>Bluetooth. Select
“Add new device” and select “AFTWS0821” from the list.
Once successfully connected, will light up on the shortcut
menu. Then select “Audio_AFTWS0821” from the Bluetooth
setting menu.
NOTE: For iOS devices, music playback and remote capture
functions will not work if you do not pair “Audio_AFTWS0821” on
the Bluetooth settings menu. The watch will notify you to connect to
your smart phone if not connected. Your smart phones Bluetooth
must be paired to
“Audio_AFTWS0821/AFTWS0821” to use the function.
Call Operation
After your smart phone is connected to the watch, you can directly
answer/reject incoming calls through the watch. To answer an
incoming call, tap the icon. To reject the call, tap the icon.
Bluetooth Music Playback
• Tap the icon to enter the Bluetooth music playback menu.
• Open your smart phones music app.
• Tap icon to play/pause music.
• Tap / icon to play the previous/next song.
NOTE: Your smart phones Bluetooth must be connected to
“Audio_AFTWS0821/AFTWS0821” to use the function. This
function will only work once connected to the Da Fit app.
For Android For iOS
Outdoor Running
On the Da Fit app, select “Outdoor running”. The app will record
your smart phones GPS data and display on the map.
You must have internet/mobile connection for the function to
work. Your location/GPS must also be turned on.
Exercise
On the main menu, tap the icon to enter the exercise/sports
interface.
There are 8 activities: walking, running, cycling, skipping,
badminton, basketball, football and swimming.
Swipe right to display the stop/pause icon. Tap the icon to pause/
stop. Swipe left to resume activity.
Tap the icon to exit and save the activity.
The smart watch will only save activity data if the distance is more
than 200 steps and 5 minutes in duration.
Heart Rate
On the main menu, tap the icon then tap the screen to start
measuring your heart rate. Data for the last 7 measurements will
be synced to the Da Fit app once connected.
Continuous Heart Rate Detection
On the Da Fit app, go to the “others” menu and set “Continuous
Heart Rate Detection”on. The app will continuously record your
heart rate.
Blood Pressure
On the main menu, tap the icon then tap the screen to start
measuring your blood pressure levels. The watch will vibrate once
measurement has nished and the data will be displayed. Data
for the last 7 measurements will be synced to the Da Fit app once
connected.
Blood Oxygen
On the main menu, tap the icon then tap the screen
to start measuring your blood oxygen levels. Data for the
last 7 measurements will be synced to the Da Fit app once
connected.
When using the heart rate, blood pressure and blood oxygen
functions, ensure the following:
• The smart watch has good contact with your wrist.
• Check that the sensor is clean and there is no dirt or
debris covering it.
• It may take over 30 seconds before the rst result is shown
on the screen.
Sleep Monitor
On the main menu, tap on the icon to enter the Sleep
interface. You can track your sleep pattern and view more
detailed records on your smart phone once connected to the
Da Fit app.
NOTE: You must be wearing the watch during the sleep
duration for the function to work.
Activity
On the main menu, tap on the icon to enter the Activity
interface. The watch will track the number of steps taken,
calories burnt and distance travelled.
Set Alarm
You can set alarms on the Da Fit app and sychronise to the
watch. On the app, turn “alarm” on and set desired time. You
can set up to 3 alarms. The watch will vibrate during the set
alarm.
2 3 4 5 6 7 8
Change The Straps
The watch comes with an additional strap for
when you want to switch up the styling.
To change the straps, turn the watch over and
push the needle knobs to the direction as shown
in the illustration.
Take off the straps and t the new strap.
Da Fit App
Search for the Da Fit app in the app store to
download, or scan the QR code below for installation.
Turn on the Watch
Once the watch is fully charged, press and hold the side button for
3 seconds to turn on the watch.
To turn off the watch, press and hold the side button for 3
seconds.
Connect to the App
Open the Da Fit app on your smart phone. Tap the icon then
“Add A Device” and it will automatically start to search for nearby
devices. On the device list, select “AFTWS0821” to connect to the
watch. You need to tap on “Pair” on a pop up window.
Go to your App info>set “allow background activity” to On. Go
to your App info>Battery usage>Battery optimisation. Select
“not optimised”. For details, please see “Background Operation
Protection Guide” on Da Fit app my menu for different mobile
models.
Disconnect from the App
For both iOS and Android devices, open the Da Fit app on
your smart phone. Tap on the icon then select “REMOVE” to
disconnect the watch from the app. You will also need to open the
Settings menu on your smart phone.
Go to Bluetooth settings, tap on the “i” (for iOS) icon on the right
side of “Audio_AFTWS0821/AFTWS0821” and then tap “Forget
This Device” to nish disconnecting.
Turn On the Screen
To turn on the screen, raise your arm if you’re wearing the watch,
or press the side button. Press the button again to turn off the
screen. Press the side button on any screen or swipe right to exit
or return to the main screen. Raising your arm too quickly or slowly
may not turn the screen on.
NOTE: ON Da Fit app, go to “others” menu and set “Quick View”
on to enable Raise your arm screen on.
1. Touch screen
2. Side button
Parts of the watch
First Time Use
Charge your watch before using for the rst time, you will need to
charge it for about 3 hours.
Charging steps:
1. Place the watch on top of the base with the charging pins on
the back of the watch aligned with the charging pins on the
charging dock. It will snap into position once correctly aligned.
2. Connect the charging dock to a USB charging adaptor (not
included) or a USB port on your computer.
3. Once fully charged, unplug the charging dock from the charger.
To keep the charging pins clean, please use a damp cloth and
gently clean the charging pins weekly.
Google Play and the Google Play logo are trademarks of Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries and regions. App Store is a service mark of Apple Inc.
Functions On the Home Screen
• Swipe right to get to the main menu. From here, swipe the
screen to display the different menus and settings. Tap the
respective icon to enter these.
• Swipe left for quick app access to Pedometer, Sleep Monitor,
Heart Rate, Bluetooth Calls, Weather, Blood Pressure and
Oxygen monitoring.
• Swipe up for the notications screen then swipe down to
return to the main screen.
• Swipe down to enter the shortcut menu. Tap the brightness
bar to adjust screen brightness.
Functions in any Screen
• Swipe right or press the side button to return to the main
screen.
• Tap on any icon to get into the sub screen.
Applications
Please allow permission and enable the notication settings on the
respective smart phone application.
Set up Bluetooth Calling
To enable the watch for your smart phone’s Bluetooth calls, music
playback and remote capture, please refer to the below:
Tap the icon at settings menu or tap the icon at the
shortcut menu to turn Bluetooth call function on.
Tap the icon on the main menu or swipe left to enter the
Bluetooth call menu where you can view call record contact list and
dial pad.
Tap the icon to reset the Bluetooth call.
3. Charging pins
4. Heart rate sensor
11
22
33
44
NOTE: The images in this guide are for reference only. Your watch
may be a different colour.
For Android devices: Go to your mobile settings>Bluetooth.
Select “+ Pair new device” and select “Audio_AFTWS0821” from
the list, or tap on “Pair” on a pop-up window if it appears.
Once successfully connected, will light up on the shortcut
menu.
For iOS devices: Go to your mobile settings>Bluetooth. Select
“Add new device” and select “AFTWS0821” from the list.
Once successfully connected, will light up on the shortcut
menu. Then select “Audio_AFTWS0821” from the Bluetooth
setting menu.
NOTE: For iOS devices, music playback and remote capture
functions will not work if you do not pair “Audio_AFTWS0821” on
the Bluetooth settings menu. The watch will notify you to connect to
your smart phone if not connected. Your smart phones Bluetooth
must be paired to
“Audio_AFTWS0821/AFTWS0821” to use the function.
Call Operation
After your smart phone is connected to the watch, you can directly
answer/reject incoming calls through the watch. To answer an
incoming call, tap the icon. To reject the call, tap the icon.
Bluetooth Music Playback
• Tap the icon to enter the Bluetooth music playback menu.
• Open your smart phones music app.
• Tap icon to play/pause music.
• Tap / icon to play the previous/next song.
NOTE: Your smart phones Bluetooth must be connected to
“Audio_AFTWS0821/AFTWS0821” to use the function. This
function will only work once connected to the Da Fit app.
For Android For iOS
Outdoor Running
On the Da Fit app, select “Outdoor running”. The app will record
your smart phones GPS data and display on the map.
You must have internet/mobile connection for the function to
work. Your location/GPS must also be turned on.
Exercise
On the main menu, tap the icon to enter the exercise/sports
interface.
There are 8 activities: walking, running, cycling, skipping,
badminton, basketball, football and swimming.
Swipe right to display the stop/pause icon. Tap the icon to pause/
stop. Swipe left to resume activity.
Tap the icon to exit and save the activity.
The smart watch will only save activity data if the distance is more
than 200 steps and 5 minutes in duration.
Heart Rate
On the main menu, tap the icon then tap the screen to start
measuring your heart rate. Data for the last 7 measurements will
be synced to the Da Fit app once connected.
Continuous Heart Rate Detection
On the Da Fit app, go to the “others” menu and set “Continuous
Heart Rate Detection”on. The app will continuously record your
heart rate.
Blood Pressure
On the main menu, tap the icon then tap the screen to start
measuring your blood pressure levels. The watch will vibrate once
measurement has nished and the data will be displayed. Data
for the last 7 measurements will be synced to the Da Fit app once
connected.
Blood Oxygen
On the main menu, tap the icon then tap the screen
to start measuring your blood oxygen levels. Data for the
last 7 measurements will be synced to the Da Fit app once
connected.
When using the heart rate, blood pressure and blood oxygen
functions, ensure the following:
• The smart watch has good contact with your wrist.
• Check that the sensor is clean and there is no dirt or
debris covering it.
• It may take over 30 seconds before the rst result is shown
on the screen.
Sleep Monitor
On the main menu, tap on the icon to enter the Sleep
interface. You can track your sleep pattern and view more
detailed records on your smart phone once connected to the
Da Fit app.
NOTE: You must be wearing the watch during the sleep
duration for the function to work.
Activity
On the main menu, tap on the icon to enter the Activity
interface. The watch will track the number of steps taken,
calories burnt and distance travelled.
Set Alarm
You can set alarms on the Da Fit app and sychronise to the
watch. On the app, turn “alarm” on and set desired time. You
can set up to 3 alarms. The watch will vibrate during the set
alarm.
2 3 4 5 6 7 8
Change The Straps
The watch comes with an additional strap for
when you want to switch up the styling.
To change the straps, turn the watch over and
push the needle knobs to the direction as shown
in the illustration.
Take off the straps and t the new strap.
Da Fit App
Search for the Da Fit app in the app store to
download, or scan the QR code below for installation.
Turn on the Watch
Once the watch is fully charged, press and hold the side button for
3 seconds to turn on the watch.
To turn off the watch, press and hold the side button for 3
seconds.
Connect to the App
Open the Da Fit app on your smart phone. Tap the icon then
“Add A Device” and it will automatically start to search for nearby
devices. On the device list, select “AFTWS0821” to connect to the
watch. You need to tap on “Pair” on a pop up window.
Go to your App info>set “allow background activity” to On. Go
to your App info>Battery usage>Battery optimisation. Select
“not optimised”. For details, please see “Background Operation
Protection Guide” on Da Fit app my menu for different mobile
models.
Disconnect from the App
For both iOS and Android devices, open the Da Fit app on
your smart phone. Tap on the icon then select “REMOVE” to
disconnect the watch from the app. You will also need to open the
Settings menu on your smart phone.
Go to Bluetooth settings, tap on the “i” (for iOS) icon on the right
side of “Audio_AFTWS0821/AFTWS0821” and then tap “Forget
This Device” to nish disconnecting.
Turn On the Screen
To turn on the screen, raise your arm if you’re wearing the watch,
or press the side button. Press the button again to turn off the
screen. Press the side button on any screen or swipe right to exit
or return to the main screen. Raising your arm too quickly or slowly
may not turn the screen on.
NOTE: ON Da Fit app, go to “others” menu and set “Quick View”
on to enable Raise your arm screen on.
1. Touch screen
2. Side button
Parts of the watch
First Time Use
Charge your watch before using for the rst time, you will need to
charge it for about 3 hours.
Charging steps:
1. Place the watch on top of the base with the charging pins on
the back of the watch aligned with the charging pins on the
charging dock. It will snap into position once correctly aligned.
2. Connect the charging dock to a USB charging adaptor (not
included) or a USB port on your computer.
3. Once fully charged, unplug the charging dock from the charger.
To keep the charging pins clean, please use a damp cloth and
gently clean the charging pins weekly.
Google Play and the Google Play logo are trademarks of Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of Apple Inc., registered in the U.S. and
other countries and regions. App Store is a service mark of Apple Inc.
Functions On the Home Screen
• Swipe right to get to the main menu. From here, swipe the
screen to display the different menus and settings. Tap the
respective icon to enter these.
• Swipe left for quick app access to Pedometer, Sleep Monitor,
Heart Rate, Bluetooth Calls, Weather, Blood Pressure and
Oxygen monitoring.
• Swipe up for the notications screen then swipe down to
return to the main screen.
• Swipe down to enter the shortcut menu. Tap the brightness
bar to adjust screen brightness.
Functions in any Screen
• Swipe right or press the side button to return to the main
screen.
• Tap on any icon to get into the sub screen.
Applications
Please allow permission and enable the notication settings on the
respective smart phone application.
Set up Bluetooth Calling
To enable the watch for your smart phone’s Bluetooth calls, music
playback and remote capture, please refer to the below:
Tap the icon at settings menu or tap the icon at the
shortcut menu to turn Bluetooth call function on.
Tap the icon on the main menu or swipe left to enter the
Bluetooth call menu where you can view call record contact list and
dial pad.
Tap the icon to reset the Bluetooth call.
3. Charging pins
4. Heart rate sensor
11
22
33
44
NOTE: The images in this guide are for reference only. Your watch
may be a different colour.
For Android devices: Go to your mobile settings>Bluetooth.
Select “+ Pair new device” and select “Audio_AFTWS0821” from
the list, or tap on “Pair” on a pop-up window if it appears.
Once successfully connected, will light up on the shortcut
menu.
For iOS devices: Go to your mobile settings>Bluetooth. Select
“Add new device” and select “AFTWS0821” from the list.
Once successfully connected, will light up on the shortcut
menu. Then select “Audio_AFTWS0821” from the Bluetooth
setting menu.
NOTE: For iOS devices, music playback and remote capture
functions will not work if you do not pair “Audio_AFTWS0821” on
the Bluetooth settings menu. The watch will notify you to connect to
your smart phone if not connected. Your smart phones Bluetooth
must be paired to
“Audio_AFTWS0821/AFTWS0821” to use the function.
Call Operation
After your smart phone is connected to the watch, you can directly
answer/reject incoming calls through the watch. To answer an
incoming call, tap the icon. To reject the call, tap the icon.
Bluetooth Music Playback
• Tap the icon to enter the Bluetooth music playback menu.
• Open your smart phones music app.
• Tap icon to play/pause music.
• Tap / icon to play the previous/next song.
NOTE: Your smart phones Bluetooth must be connected to
“Audio_AFTWS0821/AFTWS0821” to use the function. This
function will only work once connected to the Da Fit app.
For Android For iOS
Outdoor Running
On the Da Fit app, select “Outdoor running”. The app will record
your smart phones GPS data and display on the map.
You must have internet/mobile connection for the function to
work. Your location/GPS must also be turned on.
Exercise
On the main menu, tap the icon to enter the exercise/sports
interface.
There are 8 activities: walking, running, cycling, skipping,
badminton, basketball, football and swimming.
Swipe right to display the stop/pause icon. Tap the icon to pause/
stop. Swipe left to resume activity.
Tap the icon to exit and save the activity.
The smart watch will only save activity data if the distance is more
than 200 steps and 5 minutes in duration.
Heart Rate
On the main menu, tap the icon then tap the screen to start
measuring your heart rate. Data for the last 7 measurements will
be synced to the Da Fit app once connected.
Continuous Heart Rate Detection
On the Da Fit app, go to the “others” menu and set “Continuous
Heart Rate Detection”on. The app will continuously record your
heart rate.
Blood Pressure
On the main menu, tap the icon then tap the screen to start
measuring your blood pressure levels. The watch will vibrate once
measurement has nished and the data will be displayed. Data
for the last 7 measurements will be synced to the Da Fit app once
connected.
Blood Oxygen
On the main menu, tap the icon then tap the screen
to start measuring your blood oxygen levels. Data for the
last 7 measurements will be synced to the Da Fit app once
connected.
When using the heart rate, blood pressure and blood oxygen
functions, ensure the following:
• The smart watch has good contact with your wrist.
• Check that the sensor is clean and there is no dirt or
debris covering it.
• It may take over 30 seconds before the rst result is shown
on the screen.
Sleep Monitor
On the main menu, tap on the icon to enter the Sleep
interface. You can track your sleep pattern and view more
detailed records on your smart phone once connected to the
Da Fit app.
NOTE: You must be wearing the watch during the sleep
duration for the function to work.
Activity
On the main menu, tap on the icon to enter the Activity
interface. The watch will track the number of steps taken,
calories burnt and distance travelled.
Set Alarm
You can set alarms on the Da Fit app and sychronise to the
watch. On the app, turn “alarm” on and set desired time. You
can set up to 3 alarms. The watch will vibrate during the set
alarm.
2 3 4 5 6 7 8
Display 1.69”, 240 x 280 pixels
Ingress protection IP67
Charging time 3 hrs (approx.)
Charging base
input 5V 180mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.8V 240mA
Weight 50g (approx.)
Dimensions (mm) 38.5 (W) x 43 (H) x 12.2 (D)
Specications
Smart Watch
with Interchangeable Straps
User Guide
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
info@tempo.org
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in workmanship
and parts for a period of 12 months from the date of purchase.
Defects that occur within this warranty period, under normal use
and care, will be repaired, replaced or refunded at our discretion,
solely at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and to compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners.
Unfortunately, sometimes faulty products are manufactured, which
need to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-
generated data (such as files stored on a computer hard drive,
telephone numbers stored on a mobile telephone, songs stored on
a portable media player, games saved on a games console or files
stored on a USB memory stick) during the process of repair, some
or all of your stored data may be lost. We recommend you save this
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we
may replace them with refurbished goods of the same type or use
refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only
used where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily,
you may escalate your complaint. Please telephone us on 1300 002
534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 8977 3765
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
NOTE: The results and measurements of heart rate, blood
pressure and blood oxygen data cannot be used for medical
reference and should be used as a guide only.
Warranty returns
Should you for any reason need to return this product for a
warranty claim, make sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our After
Sales Support Centre on 1300 002 534.
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
Shortcuts menu
Watch Face Screen
Tap “Dial switch” in the settings menu. Swipe left/right for different
watch face options, then tap the screen again to conrm selection.
You can change the style of the watch face on the Da Fit app. Go to
the watch faces menu on the app, then tap on the desired design
and the watch will display the selected face.
Swipe down to access the shortcut menu
where you can adjust:
• Brightness
• Settings
• Weather
• Menu style
• Info
• Bluetooth call
Language
On the Da Fit app, go to the “Others” menu and change to the
desired language.
Notication
Swipe up to display notication and messages. On the Da Fit app,
tap “notications” to enable messages and notication alerts.
Sedentary Reminder
On the Da Fit app, go to the “others” menu and set “Remind to
move”on. The watch will alert you from 10am to 10pm.
Drink Water Reminder
On the Da Fit app, go to the “others” menu and turn “Drink water
reminder” on. Set the start timer and drinking interval as desired.
The watch will remind you each interval.
Camera (Remote Capture)
On the Da Fit app, tap on “shutter” to use the watch as a camera
remote for your smart phone (ensure the app is connected to your
watch). Tap the watch screen to remotely take a photo.
Weather
On the main menu, tap on the icon to display the weather. You
must be connected to the Da Fit app for the function to work. On
the app, go to the “Others “ menu and turn weather on and type in
your city. You must have internet/mobile connection and your smart
phones location/GPS must be turned on.
NOTE: For Android devices, when using Bluetooth music
playback, camera and weather:
Go to the app info>set “allow background activity” to on.
Go to the app info>battery usage>battery optimisation. Select
“not optimised.”
Please see the “Background Operation Protection Guide” on the
Da Fit app for more detail.
10 11 12 139
Display 1.69”, 240 x 280 pixels
Ingress protection IP67
Charging time 3 hrs (approx.)
Charging base
input 5V 180mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.8V 240mA
Weight 50g (approx.)
Dimensions (mm) 38.5 (W) x 43 (H) x 12.2 (D)
Specications
Smart Watch
with Interchangeable Straps
User Guide
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
info@tempo.org
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in workmanship
and parts for a period of 12 months from the date of purchase.
Defects that occur within this warranty period, under normal use
and care, will be repaired, replaced or refunded at our discretion,
solely at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and to compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners.
Unfortunately, sometimes faulty products are manufactured, which
need to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-
generated data (such as files stored on a computer hard drive,
telephone numbers stored on a mobile telephone, songs stored on
a portable media player, games saved on a games console or files
stored on a USB memory stick) during the process of repair, some
or all of your stored data may be lost. We recommend you save this
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we
may replace them with refurbished goods of the same type or use
refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only
used where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily,
you may escalate your complaint. Please telephone us on 1300 002
534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 8977 3765
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
NOTE: The results and measurements of heart rate, blood
pressure and blood oxygen data cannot be used for medical
reference and should be used as a guide only.
Warranty returns
Should you for any reason need to return this product for a
warranty claim, make sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our After
Sales Support Centre on 1300 002 534.
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
Shortcuts menu
Watch Face Screen
Tap “Dial switch” in the settings menu. Swipe left/right for different
watch face options, then tap the screen again to conrm selection.
You can change the style of the watch face on the Da Fit app. Go to
the watch faces menu on the app, then tap on the desired design
and the watch will display the selected face.
Swipe down to access the shortcut menu
where you can adjust:
• Brightness
• Settings
• Weather
• Menu style
• Info
• Bluetooth call
Language
On the Da Fit app, go to the “Others” menu and change to the
desired language.
Notication
Swipe up to display notication and messages. On the Da Fit app,
tap “notications” to enable messages and notication alerts.
Sedentary Reminder
On the Da Fit app, go to the “others” menu and set “Remind to
move”on. The watch will alert you from 10am to 10pm.
Drink Water Reminder
On the Da Fit app, go to the “others” menu and turn “Drink water
reminder” on. Set the start timer and drinking interval as desired.
The watch will remind you each interval.
Camera (Remote Capture)
On the Da Fit app, tap on “shutter” to use the watch as a camera
remote for your smart phone (ensure the app is connected to your
watch). Tap the watch screen to remotely take a photo.
Weather
On the main menu, tap on the icon to display the weather. You
must be connected to the Da Fit app for the function to work. On
the app, go to the “Others “ menu and turn weather on and type in
your city. You must have internet/mobile connection and your smart
phones location/GPS must be turned on.
NOTE: For Android devices, when using Bluetooth music
playback, camera and weather:
Go to the app info>set “allow background activity” to on.
Go to the app info>battery usage>battery optimisation. Select
“not optimised.”
Please see the “Background Operation Protection Guide” on the
Da Fit app for more detail.
10 11 12 139
Display 1.69”, 240 x 280 pixels
Ingress protection IP67
Charging time 3 hrs (approx.)
Charging base
input 5V 180mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.8V 240mA
Weight 50g (approx.)
Dimensions (mm) 38.5 (W) x 43 (H) x 12.2 (D)
Specications
Smart Watch
with Interchangeable Straps
User Guide
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
info@tempo.org
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in workmanship
and parts for a period of 12 months from the date of purchase.
Defects that occur within this warranty period, under normal use
and care, will be repaired, replaced or refunded at our discretion,
solely at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and to compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners.
Unfortunately, sometimes faulty products are manufactured, which
need to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-
generated data (such as files stored on a computer hard drive,
telephone numbers stored on a mobile telephone, songs stored on
a portable media player, games saved on a games console or files
stored on a USB memory stick) during the process of repair, some
or all of your stored data may be lost. We recommend you save this
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we
may replace them with refurbished goods of the same type or use
refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only
used where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily,
you may escalate your complaint. Please telephone us on 1300 002
534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 8977 3765
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
NOTE: The results and measurements of heart rate, blood
pressure and blood oxygen data cannot be used for medical
reference and should be used as a guide only.
Warranty returns
Should you for any reason need to return this product for a
warranty claim, make sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our After
Sales Support Centre on 1300 002 534.
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
Shortcuts menu
Watch Face Screen
Tap “Dial switch” in the settings menu. Swipe left/right for different
watch face options, then tap the screen again to conrm selection.
You can change the style of the watch face on the Da Fit app. Go to
the watch faces menu on the app, then tap on the desired design
and the watch will display the selected face.
Swipe down to access the shortcut menu
where you can adjust:
• Brightness
• Settings
• Weather
• Menu style
• Info
• Bluetooth call
Language
On the Da Fit app, go to the “Others” menu and change to the
desired language.
Notication
Swipe up to display notication and messages. On the Da Fit app,
tap “notications” to enable messages and notication alerts.
Sedentary Reminder
On the Da Fit app, go to the “others” menu and set “Remind to
move”on. The watch will alert you from 10am to 10pm.
Drink Water Reminder
On the Da Fit app, go to the “others” menu and turn “Drink water
reminder” on. Set the start timer and drinking interval as desired.
The watch will remind you each interval.
Camera (Remote Capture)
On the Da Fit app, tap on “shutter” to use the watch as a camera
remote for your smart phone (ensure the app is connected to your
watch). Tap the watch screen to remotely take a photo.
Weather
On the main menu, tap on the icon to display the weather. You
must be connected to the Da Fit app for the function to work. On
the app, go to the “Others “ menu and turn weather on and type in
your city. You must have internet/mobile connection and your smart
phones location/GPS must be turned on.
NOTE: For Android devices, when using Bluetooth music
playback, camera and weather:
Go to the app info>set “allow background activity” to on.
Go to the app info>battery usage>battery optimisation. Select
“not optimised.”
Please see the “Background Operation Protection Guide” on the
Da Fit app for more detail.
10 11 12 139
Display 1.69”, 240 x 280 pixels
Ingress protection IP67
Charging time 3 hrs (approx.)
Charging base
input 5V 180mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.8V 240mA
Weight 50g (approx.)
Dimensions (mm) 38.5 (W) x 43 (H) x 12.2 (D)
Specications
Smart Watch
with Interchangeable Straps
User Guide
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
info@tempo.org
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in workmanship
and parts for a period of 12 months from the date of purchase.
Defects that occur within this warranty period, under normal use
and care, will be repaired, replaced or refunded at our discretion,
solely at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and to compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners.
Unfortunately, sometimes faulty products are manufactured, which
need to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-
generated data (such as files stored on a computer hard drive,
telephone numbers stored on a mobile telephone, songs stored on
a portable media player, games saved on a games console or files
stored on a USB memory stick) during the process of repair, some
or all of your stored data may be lost. We recommend you save this
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we
may replace them with refurbished goods of the same type or use
refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only
used where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily,
you may escalate your complaint. Please telephone us on 1300 002
534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 8977 3765
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
NOTE: The results and measurements of heart rate, blood
pressure and blood oxygen data cannot be used for medical
reference and should be used as a guide only.
Warranty returns
Should you for any reason need to return this product for a
warranty claim, make sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our After
Sales Support Centre on 1300 002 534.
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
Shortcuts menu
Watch Face Screen
Tap “Dial switch” in the settings menu. Swipe left/right for different
watch face options, then tap the screen again to conrm selection.
You can change the style of the watch face on the Da Fit app. Go to
the watch faces menu on the app, then tap on the desired design
and the watch will display the selected face.
Swipe down to access the shortcut menu
where you can adjust:
• Brightness
• Settings
• Weather
• Menu style
• Info
• Bluetooth call
Language
On the Da Fit app, go to the “Others” menu and change to the
desired language.
Notication
Swipe up to display notication and messages. On the Da Fit app,
tap “notications” to enable messages and notication alerts.
Sedentary Reminder
On the Da Fit app, go to the “others” menu and set “Remind to
move”on. The watch will alert you from 10am to 10pm.
Drink Water Reminder
On the Da Fit app, go to the “others” menu and turn “Drink water
reminder” on. Set the start timer and drinking interval as desired.
The watch will remind you each interval.
Camera (Remote Capture)
On the Da Fit app, tap on “shutter” to use the watch as a camera
remote for your smart phone (ensure the app is connected to your
watch). Tap the watch screen to remotely take a photo.
Weather
On the main menu, tap on the icon to display the weather. You
must be connected to the Da Fit app for the function to work. On
the app, go to the “Others “ menu and turn weather on and type in
your city. You must have internet/mobile connection and your smart
phones location/GPS must be turned on.
NOTE: For Android devices, when using Bluetooth music
playback, camera and weather:
Go to the app info>set “allow background activity” to on.
Go to the app info>battery usage>battery optimisation. Select
“not optimised.”
Please see the “Background Operation Protection Guide” on the
Da Fit app for more detail.
10 11 12 139
Display 1.69”, 240 x 280 pixels
Ingress protection IP67
Charging time 3 hrs (approx.)
Charging base
input 5V 180mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.8V 240mA
Weight 50g (approx.)
Dimensions (mm) 38.5 (W) x 43 (H) x 12.2 (D)
Specications
Smart Watch
with Interchangeable Straps
User Guide
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
info@tempo.org
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in workmanship
and parts for a period of 12 months from the date of purchase.
Defects that occur within this warranty period, under normal use
and care, will be repaired, replaced or refunded at our discretion,
solely at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and to compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners.
Unfortunately, sometimes faulty products are manufactured, which
need to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-
generated data (such as files stored on a computer hard drive,
telephone numbers stored on a mobile telephone, songs stored on
a portable media player, games saved on a games console or files
stored on a USB memory stick) during the process of repair, some
or all of your stored data may be lost. We recommend you save this
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we
may replace them with refurbished goods of the same type or use
refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only
used where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily,
you may escalate your complaint. Please telephone us on 1300 002
534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 8977 3765
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: [email protected]
NOTE: The results and measurements of heart rate, blood
pressure and blood oxygen data cannot be used for medical
reference and should be used as a guide only.
Warranty returns
Should you for any reason need to return this product for a
warranty claim, make sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our After
Sales Support Centre on 1300 002 534.
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
Shortcuts menu
Watch Face Screen
Tap “Dial switch” in the settings menu. Swipe left/right for different
watch face options, then tap the screen again to conrm selection.
You can change the style of the watch face on the Da Fit app. Go to
the watch faces menu on the app, then tap on the desired design
and the watch will display the selected face.
Swipe down to access the shortcut menu
where you can adjust:
• Brightness
• Settings
• Weather
• Menu style
• Info
• Bluetooth call
Language
On the Da Fit app, go to the “Others” menu and change to the
desired language.
Notication
Swipe up to display notication and messages. On the Da Fit app,
tap “notications” to enable messages and notication alerts.
Sedentary Reminder
On the Da Fit app, go to the “others” menu and set “Remind to
move”on. The watch will alert you from 10am to 10pm.
Drink Water Reminder
On the Da Fit app, go to the “others” menu and turn “Drink water
reminder” on. Set the start timer and drinking interval as desired.
The watch will remind you each interval.
Camera (Remote Capture)
On the Da Fit app, tap on “shutter” to use the watch as a camera
remote for your smart phone (ensure the app is connected to your
watch). Tap the watch screen to remotely take a photo.
Weather
On the main menu, tap on the icon to display the weather. You
must be connected to the Da Fit app for the function to work. On
the app, go to the “Others “ menu and turn weather on and type in
your city. You must have internet/mobile connection and your smart
phones location/GPS must be turned on.
NOTE: For Android devices, when using Bluetooth music
playback, camera and weather:
Go to the app info>set “allow background activity” to on.
Go to the app info>battery usage>battery optimisation. Select
“not optimised.”
Please see the “Background Operation Protection Guide” on the
Da Fit app for more detail.
10 11 12 139
Display 1.69”, 240 x 280 pixels
Ingress protection IP67
Charging time 3 hrs (approx.)
Charging base
input 5V 180mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.8V 240mA
Weight 50g (approx.)
Dimensions (mm) 38.5 (W) x 43 (H) x 12.2 (D)
Specications
Smart Watch
with Interchangeable Straps
User Guide
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
info@tempo.org
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in workmanship
and parts for a period of 12 months from the date of purchase.
Defects that occur within this warranty period, under normal use
and care, will be repaired, replaced or refunded at our discretion,
solely at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the
Competition and Consumer Act 2010 and similar state and territory
laws.
Our goods come with guarantees that cannot be excluded under
the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and to compensation for any other
reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major
failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners.
Unfortunately, sometimes faulty products are manufactured, which
need to be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-
generated data (such as files stored on a computer hard drive,
telephone numbers stored on a mobile telephone, songs stored on
a portable media player, games saved on a games console or files
stored on a USB memory stick) during the process of repair, some
or all of your stored data may be lost. We recommend you save this
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we
may replace them with refurbished goods of the same type or use
refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only
used where they meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily,
you may escalate your complaint. Please telephone us on 1300 002
534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 8977 3765
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
NOTE: The results and measurements of heart rate, blood
pressure and blood oxygen data cannot be used for medical
reference and should be used as a guide only.
Warranty returns
Should you for any reason need to return this product for a
warranty claim, make sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this product, or if it fails to
perform to your expectations, make sure to contact our After
Sales Support Centre on 1300 002 534.
1300 002 534
Model: AFTWS-0821
Product Code: 705928 08/2021
Shortcuts menu
Watch Face Screen
Tap “Dial switch” in the settings menu. Swipe left/right for different
watch face options, then tap the screen again to conrm selection.
You can change the style of the watch face on the Da Fit app. Go to
the watch faces menu on the app, then tap on the desired design
and the watch will display the selected face.
Swipe down to access the shortcut menu
where you can adjust:
• Brightness
• Settings
• Weather
• Menu style
• Info
• Bluetooth call
Language
On the Da Fit app, go to the “Others” menu and change to the
desired language.
Notication
Swipe up to display notication and messages. On the Da Fit app,
tap “notications” to enable messages and notication alerts.
Sedentary Reminder
On the Da Fit app, go to the “others” menu and set “Remind to
move”on. The watch will alert you from 10am to 10pm.
Drink Water Reminder
On the Da Fit app, go to the “others” menu and turn “Drink water
reminder” on. Set the start timer and drinking interval as desired.
The watch will remind you each interval.
Camera (Remote Capture)
On the Da Fit app, tap on “shutter” to use the watch as a camera
remote for your smart phone (ensure the app is connected to your
watch). Tap the watch screen to remotely take a photo.
Weather
On the main menu, tap on the icon to display the weather. You
must be connected to the Da Fit app for the function to work. On
the app, go to the “Others “ menu and turn weather on and type in
your city. You must have internet/mobile connection and your smart
phones location/GPS must be turned on.
NOTE: For Android devices, when using Bluetooth music
playback, camera and weather:
Go to the app info>set “allow background activity” to on.
Go to the app info>battery usage>battery optimisation. Select
“not optimised.”
Please see the “Background Operation Protection Guide” on the
Da Fit app for more detail.
10 11 12 139
Table of contents
Other Bauhn Watch manuals
Bauhn
Bauhn ASW-0822 User manual
Bauhn
Bauhn AFWGPS-0721 User manual
Bauhn
Bauhn AFTW-1222 User manual
Bauhn
Bauhn ASM3-0816 User manual
Bauhn
Bauhn AFTW-0820 User manual
Bauhn
Bauhn AFWGPS-0722 User manual
Bauhn
Bauhn AGPSW-0723 User manual
Bauhn
Bauhn ASM-815 User manual
Bauhn
Bauhn AFTW-0520 User manual
Bauhn
Bauhn AFTWS-0521 User manual
Popular Watch manuals by other brands
E-Pill
E-Pill Medos instruction manual
CanMore
CanMore TW-203 user manual
Chronos Manufactures
Chronos Manufactures Mathieu Legrand Fleurs Volantes instruction manual
ISASWISS
ISASWISS 8172A instruction manual
WATCHMARK
WATCHMARK WM18 operating instructions
mcmurdo
mcmurdo Guardian MOB Beacon Watch user manual
Citizen
Citizen GL30 user manual
ZINVO
ZINVO CHRONO owner's manual
Chronos Manufactures
Chronos Manufactures Mathis Montabon MM-04 Instruction manual / International Guarantee
VACHERON CONSTANTIN
VACHERON CONSTANTIN Jumbo 222 manual
Chronos Manufactures
Chronos Manufactures LE COMMANDANT manual
LORUS
LORUS V33J instruction manual