Bauhn AFWGPS-0722 User manual
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Weather
Tap on the weather icon to view weather
forecast (up to 3 day forecast). You must be
connected to the FunDo Health app.
Note: The weather will only display when
connected to the FunDo Health app. You
must have Internet/mobile connection for this
function to work. Your phone location/GPS
must also be turned on.
Timer
Tap on the timer icon to enter the timer
function. Tap the default time or set
customised time. Tap the icon to start
the timer. Tap the icon to pause or the
X icon to stop the timer. Press the power
button to exit.
Charging steps:
1. Place the watch on top of the dock with
the charging points on the back of the
watch aligned with the charging pins
on the charging dock. It will snap into
position once correctly aligned.
FunDo Health App
Search for the FunDo Health
app in the app store to
download, or scan the QR
code below for installation.
1. Touch screen
2. Power button
3. Side button
4. Charging points
5. Sensor
Turn On the Screen
To turn on the screen, press the power button
or raise your arm if you’re wearing the watch.
NOTE: You will need to turn on the “Raise
hand” function on the FunDo Health app for
the function to work.
Functions On the Home Screen
Parts of the watch
First Time Use
Sports
Applications
33
2. Plug the USB charging dock into a USB
charging adaptor (not included) or a
USB port on your computer.
3. Once fully charged (battery icon is full),
unplug the charging dock from the
charger.
Google Play and the Google Play logo are trademarks of
Google LLC.
Apple, the Apple logo, iPhone, and iPad are trademarks of
Apple Inc., registered in the U.S. and other countries and
regions. App Store is a service mark of Apple Inc.
For Android For iOs
The FunDo Health app supports Android 5.0+ and iOS 11.0+
devices. The watch can only be paired with one device at a
time. To pair to another device, please disconnect the current
paired device.
Connect to the App
Open the FunDo Health app on your smart
phone. Once the app is open, follow:
Device > Add device and select the rst
“AFWGPS0722” from the list. The smart
watch will connect to the app.
The “BLE”icon at the shortcut menu will
light up green after successfully connected
to the FunDo Health app.
Disconnect from the App
Open the FunDo Health app. Select
“Device” and tap “UNBIND DEVICE” to
disconnect the watch. On iOS devices, you
will also need to open the settings menu
on your iPhone. Go to Bluetooth settings,
tap on the “i” icon on the right side of
“AFWGPS0722” and then tap ‘Forget This
Device’ to nish disconnecting.
Functions On Other Screens
• Press the power button to return to
the previous menu or exit the menu.
Blood Pressure
Tap on the blood pressure icon to measure
your blood pressure. You can view more
detailed data on the FunDo Health app.
44
55
Charge your watch before using for the rst
time. You will need to charge it for about
3.5 hours.
The watch has 9 sport modes: outdoor
running, outdoor walking, outdoor
cycling, climbing, badminton, table tennis,
basketball, skipping rope, yoga.
Once the desired sports mode is selected,
set the calorie target and exercise time by
tapping the “setting” icon. Tap the centre
of the screen to directly enter the sports
mode.
You can also select “Decided Sports Mode”
to enter the sports mode interface without
setting a target. Swipe right to pause/end
the sports mode.
• The watch has good contact with your
wrist.
• Check that the sensor is clean and
there is no dirt or debris covering it.
• The results and measurements of
heart rate, blood pressure and blood
oxygen data cannot be used for
medical reference and should be used
as a guide only.
11
22
33• Swipe up to enter the main menu
interface.
• Press the power again button to return to
the previous menu or exit the menu.
• Press the side button to enter the sports
menu interface.
• Swipe right to enter the message
notication interface.
• Swipe left to enter the quick access menu
interface, which displays step count, sleep
data, heart rate and GPS location. You
can change the menu by selecting the
interface option on the main menu.
• Press and hold the watch face for 5
seconds to change the interface, swipe
left/right to switch and tap to conrm.
Turn on the Watch
Once the watch is fully charged, press and
hold the power button for 5 seconds to turn
on the watch.
To turn off the watch, press and hold the
power button for 5 seconds, select “Power
Off” to conrm or select “Restart” to restart
the watch.
• Swipe down to enter the shortcut menu
(do not disturb mode, about, nd phone,
alarm clock, brightness).
GPS function: the watch has a built-in
GPS function allowing you to track your
distance and other data. When outdoor
running, outdoor walking, outdoor cycling
or climbing mode is selected, the watch will
automatically search for the GPS location
and once successful, the screen will display
“GPS Location”. Tap the centre of the screen
to start the sport mode, or tap the centre of
the screen to skip the GPS function (without
GPS location). For indoor sport modes, tap
“Click Start” on the screen to start.
NOTE: Smart phone must have location
settings turned on and connected to a
mobile network.
Swipe right to pause or end the sports mode.
Tap the “Stop” icon to save the sports mode
data.
GPS searching time is subject to your location
and GPS signal. It may take up to a few
minutes. If you are inside a building or are
underground, the function will not work.
Message
Tap on the message icon to view
notications and messages on the watch.
It will display up to 8 messages.
After pairing with the watch, on your
smart phone, select “OK/allow” when
asked about the notication function.
Heart Rate
Tap on the Heart Rate icon to measure
your heart rate. You can view more
detailed data on the FunDo Health app.
Blood Oxygen (SPO2)
Tap on the Blood Oxygen icon to measure
you blood oxygen levels. You can view more
detailed data on the FunDo Health app.
NOTE: For measurements for heart rate,
blood pressure and blood oxygen functions,
ensure the following:
Alarm
Tap on the alarm icon to view your
alarms. Tap “+” to add or modify the
alarm setting. You can set the alarms on
the FunDo Health app and sync it to your
watch. You can set up to 5 alarms.
Stopwatch
Tap on the Stopwatch icon to open the
stopwatch function. Tap the icon to
start the stopwatch. Tap the icon to
pause. Press the power button to exit
the interface.
2 3 4 5 6 7 8 9 10 11
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Display 1.3”, 240 x 240
pixels
Ingress protection IP67
Charging time 3.5 hrs
(approx.)
Charging base input 5VDC, 200mA
Bluetooth Range < 10m
Built-In Battery Li-ion 3.7V
360mAh
Weight 60g
Dimensions (mm) 48.8(W) x 57(H)
x 15.8(D)
Specications
Smart Watch with GPS
User Guide
1300 002 534
Model: AFWGPS-0722
Product Code: 709404 07/2022
tempo.org/support
AUS
Warranty returns
Should you for any reason need to return
this product for a warranty claim, make
sure to include all accessories with the
product.
Product does not work?
If you encounter problems with this
product, or if it fails to perform to your
expectations, make sure to contact
our After Sales Support Centre on 1300
002 534 before returning it to the store
for a refund.
Warranty Information
Repair and Refurbished Goods or Parts Notice
The product is guaranteed to be free from defects in
workmanship and parts for a period of 12 months from
the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be
repaired, replaced or refunded at our discretion, solely
at our option with no charge for parts and labour. The
benefits conferred by this warranty are in addition to all
rights and remedies in respect of the product that the
consumer has under the Competition and Consumer
Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be
excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major
failure and to compensation for any other reasonably
foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not
amount to a major failure.
The Bluetooth®word mark and logos are registered trademarks
owned by Bluetooth SIG,Inc. and any use of such marks by Hands
(IP) Holdings Pty Ltd is under license. Other trademarks and trade
names are those of their respective owners. Unfortunately, sometimes faulty products are
manufactured, which need to be returned to the
supplier for repair.
Please be aware that if your product is capable of
retaining user-generated data (such as files stored on
a computer hard drive, telephone numbers stored
on a mobile telephone, songs stored on a portable
media player, games saved on a games console or
files stored on a USB memory stick) during the process
of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to
sending the product for repair.
You should also be aware that rather than repairing
goods, we may replace them with refurbished goods
of the same type or use refurbished parts in the repair
process.
Please be assured though, refurbished parts or
replacements are only used where they meet ALDI’s
stringent quality specifications.
If at any time you feel your repair is being handled
unsatisfactorily, you may escalate your complaint. Please
telephone us on 1300 002 534 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO Box 6056, Frenchs Forest, NSW 2086, Australia
Telephone: 1300 002 534 (Aust) - Fax: (02) 9975 2688
Tempo Help Desk: 1300 002 534 (Aust)
(Operating Hours: Mon-Fri 8:30am-6pm; Sat 9am-6pm EST)
Email: tempo.org/support
Change The Straps
Turn the watch over (see below), push the
top needle knob to the right to take off the
original strap, then t the new strap.
Note: only one strap is included with this
product.
MusicMusic
After your smart phone is connected to
the watch and whilst your smart phone is
playing music, select the Music icon to enter
the music control interface to play/pause/
switch songs.
NOTE: This function only works for music
and not video playback.
Find Phone
After your smart phone is connected to the
FunDo Health app, tap “Find Phone” on the
watch and your smart phone will ring. Press
the power button to exit.
Remote CaptureRemote Capture
Tap on the remote capture icon to use the
watch as a camera remote for your smart
phone. After your smart phone is connected
to the watch, open the FunDo Health app
and select Device > Take a picture. Go to
camera mode and tap the icon on the
watch screen to remotely take a photo.
Please read the User Guide
1300 002 534
tempo.org/support
GPS LocationGPS Location
Swipe left on the home screen and select
GPS function to view the current latitude
and longitude of your current location. If
you are inside a building or underground,
this function will not work. Press the power
button to exit.
NOTE: GPS searching time is subject to your
location and GPS signal. It may take up to a
few minutes. If you are inside a building or
are underground, the function will not work.
Sleep MonitorSleep Monitor
Swipe left from the home screen to view the
sleep monitor data. After synchronising with
the FunDo Health app, you can view more
detailed records on your smart phone.
Menu ManagementMenu Management
Tap the icon to add or delete the menu
options of the quick access menu.
BrightnessBrightness
Swipe down from the home screen and tap
the brightness icon repeatedly to
change the brightness.
Factory ResetFactory Reset
Tap to restore all settings to factory default.
Sedentary ReminderSedentary Reminder
Select the Sedentary reminder and set to
on/off. This will notify you to be active. You
can also set the reminder on the FunDo
Health app.
Water Drinking ReminderWater Drinking Reminder
On the FunDo Health app, select “Device”
to set the water drinking reminder on/off.
You can set the intervals on the app.
QR CodeQR Code
Displays the QR code for the
FunDo Health app.
Shortcut MenuShortcut Menu
Swipe down from the home screen to
access the shortcut menu.
1. Do not disturb mode - tap to turn do
not disturb mode on/off. You can set the
duration for an hour or up to the next day’s
morning (if set after 7pm) or night (if set
after 7am). The watch will display “Tomorrow
morning”or “Open till night” respectively.
2. Find Phone - tap to nd your smart phone
after connected to the Fundo Health app.
3. About - display the product name, hardware
address and software version.
4. Brightness - tap to adjust the screen
brightness settings.
5. Alarm - tap to enter the alarm
settings menu.
11
33
44
55
22
33
1312 14 15 16 17 18 19
Table of contents
Other Bauhn Watch manuals
Bauhn
Bauhn AFTW-1220 User manual
Bauhn
Bauhn AGPSW-0723 User manual
Bauhn
Bauhn ASM-815 User manual
Bauhn
Bauhn AFTW-1222 User manual
Bauhn
Bauhn AFTW-0820 User manual
Bauhn
Bauhn AFTW-1221 User manual
Bauhn
Bauhn AFWGPS-0721 User manual
Bauhn
Bauhn ASW-0822 User manual
Bauhn
Bauhn AFTW-0520 User manual
Bauhn
Bauhn AFTWS-0821 User manual
