Baumatic BEC460SS User manual

1
BEC460SS
Fully automatic built in
coffee machine

User Manual for your Baumatic
BEC460SS
Fully automatic built-in coffee machine
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
GS 04/03/11
2

3
Contents
Environmental note 4
IMPORTANT SAFETY INFORMATION 5 – 7
Specifications 7 – 11
Product and aperture dimensions 7
Product specifications 8
Standardaccessories 8
Technical specifications 8
Description of the coffee machine 9
Controlpanel 10-11
Beforefirstuse 12 - 14
Cleaning 12
Filling the water tank 12 – 13
Filling with coffee beans 13 - 14
Using your coffee machine 14 – 19
Turning the coffee machine on 14 – 15
Coffeegrindregulation 15
Makingcoffee 16
Dispensing hot water 17
Dispensing steam 18 - 19
Settings 19 – 20
Programming the quantity of ground coffee 19
Programming the grinding time 19
Programming the coffee cup quantity 19 – 20
Restoring the factory settings 20
Using the coffee machine light 20
Warnings 20 – 22
Fill water tank warning 20 – 21
Replace the filter warning 21
Empty coffee grounds warning 21
Coffee probe malfunction warning 21
Malfunction warning 21 – 22
Recipes 22 - 23
Cleaning and maintenance 24 – 26
Stainless steel sections 24
Steamnozzle 24
Driptray 25
Watertank 25
Emptying the used coffee grounds 25 – 26
Self-cleaning cycle 26
Installation 27 – 31
Installationcomponents 27
Electricalconnection 28
Installing the coffee machine into a kitchen cabinet 29
Positioning 29
Installation of the coffee machine 30 - 31
Troubleshooting 32
Coffee glossary 33
Contact details 35

Environmental note
4
oThe packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
all packaging material with due regard for the
environment.
oPlease discard

IMPORTANT SAFETY INFORMATION
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained i
5
n this
ooklet, please contact the Baumatic Advice Line.
eneral Information
using
t of Baumatic Ltd.
Guarantee. The foregoing does not
affect your statutory rights.
atic service
engineers or their authorised service agent.
arning and safety instructions
ot during use and retain heat after
wed to cool before
they are removed from the appliance.
b
G
oThis appliance is designed for domestic household use only. It
can ONLY be built into a standard kitchen cabinet or ho
unit and should NOT be used as a freestanding appliance.
oThe use of this appliance for any other purpose or in any other
environment without the express agreemen
will invalidate any warranty or liability claim.
oYour new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in Baumatic’s Conditions Of
oRepairs may only be carried out by Baum
W
oThis appliance complies with all current European
safety legislation. Baumatic do wish to emphasise
that this compliance does not remove the fact
that the appliance surfaces will become
extremely h
operation.
oExtreme care MUST be taken when removing any of the
filters or nozzles. They should be allo

6
Child Safety
babies and young children
are prevented from being near to the appliance and not allowed
ssary for younger family members to be in the
kitchen, please ensure that they are kept under close supervision
at all times.
oDo not leave the coffee machine unattended when
oDo not allow electrical fittings or cables to come into contact
oDo not curtains or soft furnishings.
oCleaning of the coffee machine should be carried
oGreat care should be taken whilst using this appliance and when
oIMPORTANT: The appliance must be disconnected from the
mains before following the cleaning procedure.
ce must be installed by a suitably
qualified person, strictly in accordance with the
r injury or
oBaumatic strongly recommend that
to touch the appliance at any time.
oIf it is nece
General Safety
in use.
with areas on the appliance that get hot.
install the appliance next to
Cleaning
out on a regular basis.
following the cleaning procedure.
Installation
This applian
manufacturer’s instructions.
oBaumatic Ltd. declines any responsibility fo
damage, to any person or property, as a result of
improper use or installation of this appliance.

7
with the standards currently in
force. This appliance must be used by a trained person for
rposes only.
pec
oThe manufacturer declares that the coffee machine is built
using certified materials and requires the appliance to be
installed in accordance
domestic pu
S ifications
idth: 594 mm
e D en
idth: 560 mm
epth: 510 mm
Product Dimensions
Height: 445 mm
W
Depth: 533 mm
Apertur im sions
Height: 458 mm
W
D

8
n
of 1 or 2 cups , hot chocolate, tea and instant
acity 400g)
ds container indicator
oPull-out drawer for coffee waste
appliance extraction
ed fused
outlet with 3 mm contact gap)
oMains supply lead 3 x 1.5mm²
sales invoice. The rating plate for your coffee machine
n be located by opening the pull out drawer at the bottom of the
ate of Purchase ………………………………
Product specifications
oTouch control operatio
oMark resistant coating
oChoice
oSteam spout for cappuccino
coffee
oCoffee quantity regulation
oDrawer for coffee beans (cap
oRegulation knob for grinding coffee beans
oEmpty water tank indicator
oEmpty coffee groun
oSelf-cleaning cycle
Standard accessories
oTelescopic runners for
Technical specifications
oCoffee / steam pump pressure: 12 bar
oCoffee boiler output 500 W
oSteam boiler output 1200 W
oWater tank capacity: 2.5 litres
oMAX connected load: 2.00 kW
oPower supply 230 Vac 50 – 60 Hz
oSupply connection 13 A (double pole switch
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your
ca
coffee maker.
Model Number ……………………………….
Serial Number ……………………………….
D

Description of the coffee machine
pensing nozzle
er
8) Control panel
9) Door / tray for emptying the coffee grounds
1) Water tank
2) Decalcifying filter
3) Dispenser
4) Water / steam dis
5) Drip tray
6) Coffee contain
7) Grind regulation knob
9

Control panel
10
N/OFFbutton
TART / STOP button
SPRESSO COFFEE button
EGULAR COFFEE button
ATER button
ill water tank indicator
mpty coffee grounds indicator
alfunction warning indicator
IGHT button
TWO ESPRESSO COFFEES button
O
S
E
R
W
F
E
M
SELF-CLEANING cycle button
L

11
TWO REGULAR COFFEES button
Replace filter indicator
offee probe malfunction indicator
ON button
indicator
Strong coffee indicator
STEAM button
C
COFFEE QUANTITY REGULATI
Light coffee indicator
Medium coffee

12
Before first use
1) Cleaning
oIt is strongly recommended to clean the appliance
t the decalcifying filter is
east 20 minutes. You should always
drip tray from the
machine as shown in the diagram
on the left.
hown in
the diagram on the left, and pull
the machine towards you.
oCarefully pull the coffee machine
out of the furniture housing by
sliding it on its telescopic runners.
prior to its first use. Particular attention should be
paid to the water tank.
oFor further information on cleaning the appliance, please refer to
the cleaning instructions on pages 24 - 26.
oInstall the appliance as per the installation instructions contained
within this booklet.
2) Filling the water tank
oBefore filling the water tank, ensure tha
soaked in cold water for at l
follow the manufacturer’s instructions.
oRemove the
oPress the unlocking lever under the
drip tray, in the directions s

oRemove the water tank lid and
insert the decalcifying filter as
shown in the diagram on the left.
Press the filter into place until
you hear a click.
oThe water in the tank should be
changed regularly, especially if
the machine has not been used
in a long time.
oReplacement filters can be
purchased from many appliance
stores or supermarkets.
oRemove the water tank by pulling
it upwards out of the coffee
machine as shown in the diagram
on the left.
oFill the water tank with drinking
water. The tank can hold a
maximum of 2.5 litres of water.
oPlace the water tank back into
the coffee machine by sliding it
down carefully.
oYou should ensure that the two
connection points at the bottom
match up.
3) Filling with coffee beans
oIMPORTANT: Before pouring coffee beans into the
container, you should check that there are no foreign
bodies inside.
13

oOpen the coffee container lid
and pour approximately 200g of
coffee beans into the container
as shown in the diagram on the
left.
oCarefully push the machine
back into the furniture housing
until you hear a click. This
indicates that the machine is
locked into place.
Using your coffee machine
Turning the coffee machine on
oPull the machine out of the
furniture housing as
described in the previous
section.
oTurn the main switch,
located at the back of the
machine, to position ‘1’ as
shown in the diagram on
the left.
oPush the machine back into
the furniture housing. The
appliance will now be in
stand-by mode.
14

oPress the ON / OFF button. The LED lights will flash
before turning on which indicates that the machine is
ready to use.
oIMPORTANT: If the coffee machine is not used
for 45 minutes, it will return to stand-by mode.
Coffee grind regulation
IMPORTANT: The fineness of the coffee grind is
initially set at the default factory setting. The
fineness can be adjusted to suit personal taste.
oA grind that is too coarse produces coffee that flows too quickly
without creaminess and body. On the other hand, a grind that is
too fine produces coffee that flows very slowly with an intense
taste and a burnt smell.
oThe average pouring time for a regular espresso coffee is
between 20 – 30 seconds.
oTo regulate the coffee grind you should pull the machine out of
the furniture housing as described in the “Before First Use”
section on page 12.
oLocate the grind
regulation knob on the
right hand side of the
machine and rotate the
knob accordingly.
oTurning the knob
clockwise produces a
finer grind and
stronger coffee.
Turning the knob
anticlockwise produces
a coarser grind and
lighter coffee.
oThe grinding fineness can be viewed on the lid of the coffee bean
container.
oPush the machine back into the furniture housing until it clicks
into place.
15

Making coffee
oThe dispensing time for an excellent espresso coffee is about 15
– 25 seconds. Factors that can influence the dispensing time are
the fineness of the coffee grind and the quantity of ground
coffee. You can adjust either of these settings by following the
relevant instructions in this manual.
oPlace one or two cups under the dispenser and adjust the height
of the dispenser nozzle. Turning the dial raises or lowers the
nozzle accordingly. oPress the relevant button
for the number of coffees
and type that you need.
16
oPress the START / STOP button within 10 seconds of
making your selection and the coffee making process
will begin.
oThe dispensing of the coffee will end automatically
when the quantity of coffee selected has been poured.
You can stop the dispensing of coffee at any time by
pressing the START / STOP button.
oIMPORTANT: If the START / STOP button is not pressed
within 10 seconds of making your coffee selection, the
machine will cancel the selection.

Dispensing hot water
IMPORTANT: Please note that the main boiler and
the steam boiler CANNOT be operated at the same
time.
oIMPORTANT: You should not dispense hot water
immediately after dispensing steam.
oBefore dispensing hot water, place the water / steam nozzle in a
suitable position and place a container beneath it.
oPress the WATER button.
oPress and hold the START / STOP button within 10
seconds of selecting the hot water function.
oThe water will be dispensed all the time the button is held down.
To stop the dispensing of hot water, release the button.
oIMPORTANT: If the START / STOP button is not pressed
within 10 seconds of making your selection, the machine
will cancel the selection.
17

Dispensing steam
IMPORTANT: Please note that the main boiler and
the steam boiler CANNOT be operated at the same
time.
oPress the STEAM button. The indicator light will flash
for about 15 seconds. When the indicator light stops
flashing and remains on this shows that the machine
is ready to produce steam.
oPlace the water / steam nozzle in a suitable position and place
the container of liquid to be heated below the nozzle.
oYou should ensure that the nozzle is fully immersed in the liquid.
oPress and hold the START / STOP button and the
steam will be dispensed. The steam will continue to
flow until you release the button.
oIf you are preparing milk for a cappuccino it is recommended
that you agitate the milk for best results.
oIMPORTANT: If the START / STOP button is not pressed
within 10 seconds of the steam being ready, the machine
will cancel the selection.
oWARNING: During this operation, extreme
caution should be exercised, as the
dispensing pipe will get hot.
oWhen releasing steam, avoid directing the
steam towards your person. There is a
danger of scalding.
18

oAlways use a container or a mug underneath the
dispensing pipe whilst dispensing steam.
Settings
Programming the quantity of ground coffee
oYou are able to choose from 3 strengths of coffee
which are light, medium and strong.
oTo change the strength of coffee, press the COFFEE
QUANTITY REGULATION button repeatedly. The LED
for the selected coffee strength will light.
oOne bean indicates a light strength,
two beans indicate a medium strength
and 3 beans indicate a strong coffee.
Programming the grinding time
oYou can program the grinding time for the strong coffee setting
and the medium and light coffee settings will adjust accordingly.
oTo enter the programming mode, press and hold the
START / STOP button for about 5 seconds when the
machine is in stand-by mode.
oThe LEDs on the upper left line light up to indicate the
grinding time. Press the COFFEE QUANTITY
REGULATION button to increase the time.
oPress the START / STOP button to decrease the time.
When you have set the correct grind time press the
ON / OFF button to confirm the changes and exit the
programming mode.
Programming the coffee cup quantity
oAll of the coffee making options have a preset quantity, except
for hot water and steam. The machine is initially set to the
default factory setting to dispense the ideal quantity of coffee for
an espresso or regular cup.
oWhen coffee is being dispensed you can stop the flow
before the preset time by pressing the START / STOP
button.
19

oYou can also lengthen the pouring time for a larger quantity of
coffee by holding down the START / STOP button within 3
seconds from the end of the preset time. The coffee will keep
pouring until the button is released for up to a maximum of 20
seconds.
Restoring the factory settings
oThe coffee machine is programmed at the factory for Italian-
style espresso coffee and German-style regular coffee.
oIf changes have been made to the settings and you
wish to revert to the default factory programming, you
must press and hold the COFFEE QUANTITY
REGULATION button for about 6 seconds when the
machine is in stand-by mode.
oAll of the LEDs, except the ON / OFF button will flash
for 5 seconds and after this the factory settings will be
restored.
oPress the ON / OFF button to begin making coffee using the
default programming.
Using the coffee machine light
oThe coffee machine has LEDs for illuminating the dispensing
compartment for easier usage and observation.
oTo turn the light on, press the LIGHT button once.
Press this button once again to turn the light back
off.
oThe light function is only available when the machine is turned
on and not when it is in stand-by mode.
Warnings
oThe coffee machine may display a warning which prompts you to
carry out an action or alerts you to a problem with the machine.
Fill water tank warning
oThe machine is equipped with a sensor which detects water in
the water tank.
20
oIf there is no water in the tank, the fill water tank
indicator will light. The coffee machine will not function
until the water tank is filled.