
14 / EN Washing Machine / User’s Manual
4.11 Starting the programme
PressStart/Pausebuttontostarttheprogramme.
Programmefollow-uplightshowingthestartupofthe
programme will turn on.
C
Ifnoprogrammeisstartedornokeyispressedwithin
1 minute during programme selection process, the
machinewillswitchtoPausemodeandtheillumination
level of the temperature, speed and loading door
indicatorlightswilldecrease.Otherindicatorlightsand
indicatorswillturnoff.OncetheProgrammeSelection
knobisrotatedoranybuttonispressed,indicatorlights
and indicators will turn on again.
4.12 Child Lock
UseChildLockfunctiontopreventchildrenfromtampering
with the machine. Thus you can avoid any changes in a
running programme.
C
IftheProgrammeSelectionknobisturnedwhenthe
ChildLockisactive,“Con”appearsonthedisplay.
TheChildLockdoesnotallowanychangeinthe
programmes and the selected temperature, speed and
auxiliary functions.
C
Even if another programme is selected with the
ProgrammeSelectionknobwhiletheChildLockis
active, previously selected programme will continue
running.
To activate the Child Lock:
Pressandhold1st and 2ndAuxiliaryFunctionbuttonsfor
3 seconds. The lights on the 1st and 2nd Auxiliary Function
buttonswillflash,and"C03","C02","C01"willappearon
thedisplayrespectivelywhileyoukeepthebuttonspressed
for3seconds.Then,"Con"willappearonthedisplay
indicatingthattheChildLockisactivated.Ifyoupressany
buttonorturntheProgrammeSelectionknobwhentheChild
Lock is active, same phrase will appear on the display. The
lightsonthe1stand2ndauxiliaryfunctionbuttonsthatare
usedtodeactivatetheChildLockwillblink3times.
TodeactivatetheChildLock:
Pressandhold1st and 2ndauxiliaryfunctionbuttonsfor3
seconds while any programme is running. The lights on the
1st and 2ndAuxiliaryFunctionbuttonswillflash,and"C03",
"C02","C01"willappearonthedisplayrespectivelywhile
youkeepthebuttonspressedfor3seconds.Then,"COFF"
willappearonthedisplayindicatingthattheChildLockis
deactivated.
C
Inadditiontothemethodabove,todeactivatetheChild
Lock,switchtheProgrammeSelectionknobtoOn/
Offpositionwhennoprogrammeisrunning,andselect
another programme.
C
ChildLockisnotdeactivatedafterpowerfailuresor
when the machine is unplugged.
4.13 Progress of programme
Progressofarunningprogrammecanbefollowedfromthe
ProgrammeFollow-upindicator.Atthebeginningofevery
programme step, the relevant indicator light will turn on and
light of the completed step will turn off.
You can change the auxiliary functions, speed and
temperature settings without stopping the programme flow
while the programme is running. To do this, the change
youaregoingtomakemustbeinastepaftertherunning
programmestep.Ifthechangeisnotcompatible,relevant
lights will flash for 3 times.
C
Ifthemachinedoesnotpasstothespinningstep,
RinseHoldfunctionmightbeactiveortheautomatic
unbalancedloaddetectionsystemmightbeactivated
duetotheunbalanceddistributionofthelaundryinthe
machine.
4.14 Loading door lock
There is a locking system on the loading door of the
machine that prevents opening of the door in cases when
thewaterlevelisunsuitable.
Loading door light will start flashing when the machine
isswitchedtoPausemode.Machinechecksthelevelof
thewaterinside.Ifthelevelissuitable,LoadingDoorlight
illuminates steadily within 1-2 minutes and the loading door
canbeopened.
Ifthelevelisunsuitable,LoadingDoorlightturnsoffandthe
loadingdoorcannotbeopened.Ifyouareobligedtoopen
theLoadingDoorwhiletheLoadingDoorlightisoff,you
havetocancelthecurrentprogramme;see"Cancelingthe
programme".
4.15 Changing the selections after
programme has started
Switching the machine to pause mode
PresstheStart/Pausebuttontoswitchthemachineto
pause mode while a programme is running. The light of
the step which the machine is in starts flashing in the
ProgrammeFollow-upindicatortoshowthatthemachine
hasbeenswitchedtothepausemode.
Also,whentheloadingdoorisreadytobeopened,Loading
Doorlightwillalsoilluminatecontinuouslyinadditiontothe
programme step light.
Changing the speed and temperature settings for
auxiliary functions
Dependingonthesteptheprogrammehasreached,you
maycanceloractivatetheauxiliaryfunctions;see,"Auxiliary
functionselection".
You may also change the speed and temperature settings;
see,"Spinspeedselection"and"Temperatureselection".
C
Ifnochangeisallowed,therelevantlightwillflashfor
3 times.
Adding or taking out laundry
PresstheStart/Pausebuttontoswitchthemachineto
pause mode. The programme follow-up light of the relevant
step during which the machine was switched into the pause
mode will flash. WaituntiltheLoadingDoorcanbeopened.
OpentheLoadingDoorandaddortakeoutthelaundry.
ClosetheLoadingDoor. Make changes in auxiliary functions,
temperature and speed settings if necessary. PressStart/
Pausebuttontostartthemachine.