Baxton Studio Gilmore BBT5381.12-DC User manual

HARDWARE LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 60mm 4 PCS
2M6 SPRING 4 PCS
3M4 ALLEN KEY (BALL SHAPE) 1 PC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver (not provided).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5381.12 - DC 1 OF 1
STEP 1 STEP 2
PART LIST
ITEM DESCRIPTION QTY
ACHAIR 1 PC
BCHAIR LEG 1 PC
A
B
3
1
2
x4

PART LIST
ITEM DESCRIPTION QTY
ATABLE TOP 1 PC
BLEGS 4 PCS
ASSEMBLY INSTRUCTIONS PART LIST
ITEM DESCRIPTION QTY
1JCBC BOLT M6 x 60mm 8 PCS
2M6 FLAT WASHER 8 PCS
3M6 SPRING WASHER 8 PCS
4M4 ALLEN KEY 1 PC
STEP 1
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS :1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
STEP 2
A
B
2
3
1
4