BCP SKY2773 User manual

SKY2773
Ver. 2
INSTRUCTION
MANUAL
Hanging Jewelry Armoire
with 4 Picture Frames

Thank you for choosing us! Since 2002, Best
Choice Products has been bringing customers
high-quality products at the absolute lowest
price. With everything ranging from instruments
and toys to furniture and outdoor, we’ve got
your everyday living essentials covered. We’re
centered around a customer-first philosophy –
with free shipping, exceptional customer
service, and a catalog sourced with you in mind.

• Please do not exceed the weight limitations of this item
•Firmly secure all bolts, screws and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or
factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
•This product contains small parts for mounting. Keep pets and children away when mounting or hanging.
NOTICE Please retain these instructions for future reference.
|3
PARTS
1
2 PCS
HARDWARE
APPROXIMATELY
15 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
REQUIRED
23
1 PC
ARMOIRE
A
20 LBS
CAPACITY
LBS
M5 x 45mm
SCREW
2 PCS
8mm x 30mm
WALL ANCHOR
1 PC
ADHESIVE STRIP
PHILLIPS
SCREWDRIVER
6mm DRILL BIT
WITH DRILL
PENCIL
& RULER
LEVELER
(OPTIONAL)

A
1Measure the distance between the hang holes located on the back of the armoire for the
Xmeasurement.
Halfway between the hang holes, measure to the top of the frame for the Ymeasurement.
Use a pencil and ruler to replicate your measurements on a wall for the placement of the armoire.
Measure twice to produce the
most accurate measurement.
Use a level to ensure that holes
are drilled at an even height.
X
Y
BACK VIEW
4 |
PRODUCT ASSEMBLY

2
34
Use an electric drill to drill two screw holes.
Insert two part 2 wall anchors into the holes.
1
2
x2
x2
Screw two part 1 screws into the
wall anchors.
Do not insert the screws completely
into the wall; leave some of the screw
exposed to hang the armoire.
Place a part 3 adhesive strip on the back
of the armoire.
|5
3
PRODUCT ASSEMBLY