Beagle 0300 User manual
HIGH ARM SLING
FITTING INSTRUCTIONS
Prospect Building, Duttons Way, Shadsworth Business Park, Blackburn, BB1 2QR
Beagle Orthopaedic
IFU/UL/005
Any product supplied by Beagle Orthopaedic is intended
for single patient use only. Re-use of any product will
invalidate the CE mark and any warranty.
Product Codes
Sizing Information
Size Codes
Universal 0300
Large 0305
To use as a shoulder immobiliser, follow
steps 1 to 5 above then attach the
immobilisation strap to the front of the High
Arm Sling, 3-5cms away from the securing
strap.
Run the immobilisation strap around the
waist.
Place the injured arm into the sling, ensuring
the elbow and forearm are supported securely
to avoid discomfort
Hold the top of the sling closed and attach
the securing strap to the front of the sling
near the elbow fold over and secure
Run the shoulder strap up from the injured
elbow, round the neck and over the uninjured
shoulder. Feed it through the D-ring on the
outside of the sling and back on itself.
Adjust the height as required and secure the
strap firmly with the hook & loop fastening
1
2
4
5
6Feed the immobilisation strap through the
side facing D-ring (as shown) and secure
with hook & loop fastening.
Close the sling 5-7cm up from the wrist using
the D-ring strap, ensuring that the side facing
D-ring is positioned on the inside of the sling
3
»Post trauma
»Post operative
»Oedema control
»Paralysis
»CVA
INDICATIONS FOR USE
This manual suits for next models
1
Other Beagle Personal Care Product manuals
