Bebe Care LETTO 095590 User manual

IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
SAFETY PRECAUTIONS
Read all instructions before use of the 3 drawer chest. Keep instructions for future use.
WARNING
BEFORE USE OF THE 3 DRAWER CHEST, READ AND UNDERSTAND THE INSTRUCTIONS.
ALWAYS USE ANTI-TIP STRAP THAT IS SUPPLIED WITH THIS PRODUCT TO PREVENT INJURYTO YOUR CHILD.
THIS FURNITURE ITEM CANTIP WHEN THE ANTI-TIP STRAP IS NOT USED, ESPECIALLY WHEN PLACED ON CARPET,
UNEVEN OR SLOPING FLOORING, OR WHEN SUBJECT TO EXTREME USE.
REMEMBERTO INSPECT YOUR CHEST OF DRAWERS REGULARLY FOR WEAR OR ACCIDENTAL DAMAGE,AND FOR
THE SECURITY OF COMPONENTS.
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia,
contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
LETTO
3 DRAWER CHEST
MODEL # 095590
Letto 3 Drawer Chest
# 095590
(Pre-assembled)
Supplied loose in box:
Anti-Tip Wall Strap Kit
• Wall Strap x 2
• 32 mm Wall Mounting
Plugs x 8
• 25 mm Screw x 8
• 19 mm Screw x 6
RECOMMENDED LETTO CONFIGURATIONS
Letto 3 Drawer Chest
# 095590
Letto Modular Bookcase
# 095598
+
=
Letto 3 Drawer Chest
# 095590
Letto Change Top
# 095592
Universal Change Pad
#115140BC-003
+ +
=

IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
LETTO
3 DRAWER CHEST
MODEL # 095590
HOW TO CARE FOR YOUR BEBE CARE FURNITURE
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners – tighten or replace if required. To maintain
the safety of your 3 Drawer Chest, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and
accessories approved by CNP Brands.
Distributed in Australia by CNP Brands
20 Calarco Drive,
Derrimut,VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected].nz
A minimum of two straps are used for each furniture piece using two screws per bracket. Brackets must be fixed to wall studs.
ANTI-TIP FURNITURE STRAP INSTALLATION
1 2
Locate and mark wall studs behind
furniture and corresponding position
on the furniture surface.
Position wall brackets (screw holes
facing down) on the wall stud about
150 mm below furniture top then
mark and drill pilot holes into wall
surface.
Screw wall brackets into wall studs
using 32 mm wall mounting plugs
and 25 mm screws.
3 pilot holes on each end of the
product are already pre-drilled.
Screw brackets into solid timber
area of furniture using minimum of
two 19 mm screws.
Slide furniture back into position and
pull the wall bracket straps until tight.
1a.
1b.
1c.
2a.
2b.
2c.
IMPORTANT CONFIGURATION NOTE:
Before using the Letto 3 Drawer Chest with Letto Change Top, make sure to always attach it to the coordinating product using the attachments provided
in the box. Always align the back of both items, with the screws facing the wall and attach anti-tip furniture strap for added safety.
When using with the Letto Modular Bookcase, make sure to remove the leg bracket from the bookcase before placing it on top of the Letto 3 Drawer
Chest. Always align the back of both items when in configuration and always attach anti-tip furniture strap for added safety.
For more information regarding our full range of coordinating Letto Cots and Change Tables, please visit the CNP Brands website at
www.cnpbrands.com.au and click the bebe care brand link, or contact our Sales Department on 1300 667 137 to make your enquiry.
ADDITIONAL FURNITURE RANGE
Letto Modular Bookcase
# 095593
Letto Toy Chest
# 095594
Letto Change Top
# 095592
Letto Open Chest
# 095591
Letto 3 Drawer Chest
# 095590