Bebe Care ZURI DRAWER CHEST User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
ZURI DRAWER CHEST MODEL # 095610

2
Read all instructions before assembly and use of the drawer chest. Keep instructions
for future use.
BEFORE USE OF THE DRAWER CHEST, READ AND UNDERSTAND THE INSTRUCTIONS.
ALWAYS USE ANTI-TIP STRAP THAT IS SUPPLIED WITH THIS PRODUCT TO PREVENT INJURY
TO YOUR CHILD.THIS FURNITURE ITEM CAN TIP WHEN THE ANTI-TIP STRAP IS NOT USED,
ESPECIALLY WHEN PLACED ON CARPET,UNEVEN OR SLOPING FLOORING, OR WHEN
SUBJECT TO EXTREME USE.
REMEMBER TO INSPECT YOUR CHEST OF DRAWERS REGULARLY FOR WEAR OR ACCIDENTAL
DAMAGE,AND FOR THE SECURITY OF COMPONENTS.
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
SAFETY PRECAUTIONS
WARNING

3
Due to variations in the style and design of our products, the photographs and illustrations shown in this instruction
manual are generic, therefore product fabrics, colour and design may vary from images shown. CNP Brands reserves
the right to alter product specifications without notice as a result of our ongoing policy of product improvement.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Zuri Drawer Chest
Congratulations on your purchase of the Zuri Drawer Chest.
This product has been designed and developed with safety, comfort
and functionality in mind. Please take the time to read this manual
carefully before using this product and keep it in a safe place for
future reference.
CONGRATULATIONS

4
ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the box against the list
below. If anything is missing, please contact Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New
Zealand contact Wainhouse Distribution on 0800 567 5000.
Important Configuration Note:
Before using the Zuri Drawer Chest with the Zuri Change Top, make sure to always attach it to
the coordinating product using the attachments provided in the box. Always align the back of
both items, with the screws facing the wall and attach anti-tip furniture strap for added safety.
Supplied loose in box (Unit Components):
Recommended Zuri Configurations:
Zuri Drawer Chest x 1
x 1
x 2
x 6
Foot Board
27mm Screws
Anti-Tip Wall Strap Kit
• Wall Strap x 2
• 58mm Screw x 2
• 38 mm Screw x 4
• 16 mm Screw x 6
• Washer x 2
Zuri Drawer Chest
# 095610
Zuri Change Top
# 095611
Universal Change Pad
# 115153-003
+ + =

5
ASSEMBLY CONTENTS / ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Drawer Chest Foot Boards...
1
2
Carefully lay the Drawer Chest down on its
back.
Insert 1 x Foot Board into the designated space
on the underside of the Drawer Chest.
Attach one Foot Board via 3 x 27mm Screws.
Tighten until firm.
Repeat for remaining Foot Board.
Carefully lift and stand the Drawer Chest
upright.
1a.
1b.
1c.
1d.
2a.
PLEASE NOTE: Two people are required to lift the Drawer Chest
during assembly.
As small parts are involved in assembly, children should be kept clear of the
assembly area.
Dispose of all packaging material immediately after the change centre is
assembled.
Identify all parts and components.
Clear an area on the floor for assembly and place a sheet on the floor to ensure
the change centre is not scratched during assembly.
a.
b.
c.
d.

6
ANTI-TIP FURNITURE STRAP INSTALLATION
1
2
Locate and mark timber wall studs behind furniture
and corresponding position on the furniture surface.
Position wall strap plates (screw holes facing down)
on the wall stud about 150 mm below furniture top,
then mark and drill pilot holes into wall surface,
ensuring adequate contact with the timber wall studs.
Attach wall strap plates to wall studs using 2 x
38mm screws and 1 x 58mm screw with washer.
3 pilot holes on each end of the product are already
pre-drilled.
Screw wall strap plates into solid timber area of
furniture using three 16 mm screws.
Slide furniture back into position and pull the wall
bracket straps until tight.
A minimum of two straps are used for each furniture piece using three screws per
bracket. Brackets must be fixed to wall studs.
1a.
1b.
1c.
2a.
2b.
2c.
The drawer chest is now ready for use.

7
HOW TO CARE FOR YOUR BEBE CARE COT
Cleaning
Maintenance
This product has been designed and developed with safety, comfort and
functionality in mind. Please take the time to read this manual carefully before
using this product and keep it in a safe place for future reference.
To ensure the long-lasting use of your drawer chest, wipe down with a damp
cloth and use a mild soap solution if necessary. Do not use abrasive cleaners.
Always store product in a clean dry place.
Always check parts regularly for tightness of screws, nuts and other fasteners
– tighten or replace if required. To maintain the safety of your cot, seek
prompt repairs for bent, torn, worn or broken parts. Use only those parts and
accessories approved by CNP Brands.
If you have any difficulties in assembling the cot, please contact our Service
Department.
In Australia, contact CNP Brands on 1300 667 137, in New Zealand contact
Wainhouse Distribution on 0800 567 5000.

Distributed in Australia by CNP Brands
82 Maribyrnong Street, Footscray,VIC, 3011
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse
Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [e-mail]