Bebe Care LETTO 095593 User manual

IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
SAFETY PRECAUTIONS
Read all instructions before use of the modular bookcase. Keep instructions for future use.
WARNING
BEFORE USE OF THE MODULAR BOOKCASE READ AND UNDERSTAND THE INSTRUCTIONS.
ALWAYS USE ANTI-TIP STRAPTHAT IS SUPPLIED WITHTHIS PRODUCTTO PREVENT INJURYTO YOUR CHILD.
THIS FURNITURE ITEM CANTIP WHEN THE ANTI-TIP STRAP IS NOT USED,ESPECIALLY WHEN PLACED ON CARPET,
UNEVEN OR SLOPING FLOORING, OR WHEN SUBJECT TO EXTREME USE.
REMEMBER TO INSPECT YOUR MODULAR BOOKCASE REGULARLY FOR WEAR OR ACCIDENTAL DAMAGE, AND
FOR THE SECURITY OF COMPONENTS.
KEEP INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE.
Check what you have received...
You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service. In Australia,
contact CNP Brands on 1300 667 137, in New Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
LETTO
MODULAR BOOKCASE
MODEL # 095593
Letto Modular Bookcase
# 095593
(Pre-assembled)
RECOMMENDED LETTO CONFIGURATIONS
Letto Open Chest
# 095591
Letto 3 Drawer Chest
# 095590
Letto Modular Bookcase
# 095593
Letto Modular Bookcase
# 095593
+ +
= =
Anti-Tip Wall Strap Kit
• Wall Strap x 2
• 32 mm Wall Mounting
Plugs x 8
• 25 mm Screw x 8
• 19 mm Screw x 6

IMPORTANT: RETAIN FOR FUTURE REFERENCE, READ CAREFULLY
LETTO
MODULAR BOOKCASE
MODEL # 095593
For more information regarding our full range of coordinating Letto Cots and Change Tables, please visit the CNP Brands website at
www.cnpbrands.com.au and click the bebe care brand link, or contact our Sales Department on 1300 667 137 to make your enquiry.
ADDITIONAL FURNITURE RANGE
HOW TO CARE FOR YOUR BEBE CARE FURNITURE
Maintenance
Always check parts regularly for tightness of screws, nuts and other fasteners – tighten or replace if required. To maintain
the safety of your modular bookcase, seek prompt repairs for bent, torn, worn or broken parts. Use only those parts and
accessories approved by CNP Brands.
Distributed in Australia by CNP Brands
20 Calarco Drive,
Derrimut,VIC, 3030
Customer Service 1300 667 137
W: www.cnpbrands.com.au
E: [e-mail]
F: www.facebook.com/CNPBrands
I: @cnp_baby
Distributed in New Zealand by Wainhouse Distribution
2-6 Argyle St, Morningside,
PO Box 41-014,
St Lukes,Auckland, New Zealand
Customer Service: 0800 567 5000
E: [email protected].nz
IMPORTANT CONFIGURATION NOTE:
Before using the Letto Modular Bookcase on top of the Letto Open Chest or Letto 3 Drawer Chest, make sure to remove the base of the product.
Always align the back of both items when in configuration and attach anti-tip furniture strap for added safety.
A minimum of two straps are used for each furniture piece using two screws per bracket. Brackets must be fixed to wall studs.
ANTI-TIP FURNITURE STRAP INSTALLATION
1 2
Locate and mark wall studs behind
furniture and corresponding position
on the furniture surface.
Position wall brackets (screw holes
facing down) on the wall stud about
150 mm below furniture top then
mark and drill pilot holes into wall
surface.
Screw wall brackets into wall studs
using 32 mm wall mounting plugs
and 25 mm screws.
3 pilot holes on each end of the
product are already pre-drilled.
Screw brackets into solid timber
area of furniture using minimum of
two 19 mm screws.
Slide furniture back into position and
pull the wall bracket straps until tight.
1a.
1b.
1c.
2a.
2b.
2c.
Letto Modular Bookcase
# 095593
Letto Toy Chest
# 095594
Letto Change Top
# 095592
Letto Open Chest
# 095591
Letto 3 Drawer Chest
# 095590