Becen BC-P186S User manual

1
www.szbecen.com
USER’S MANUAL
Model: BC-P186S
18x6in1 Super Wash Led Par Light
Package Includes:
1 x super wash led par light
1 x handle,knob
1 x power cable
1 x DMX cable
Please read this manual before use

2
www.szbecen.com
Features
Voltage:AC 110-260V，50/60Hz
Lamp:18pcs*6in1 LED
Control mode: DMX512, RDM
Safety precautions
To ensure that the local voltage and the required voltage for product is consistent.
If a product's power cord is damaged, please do not try to use the product. Do not try to
unplug the power cord from the ground plug. Plug is used to reduce short-circuit
electric shocks and fire prevention.
Before making any connections disconnect the main power supply.
In any case, please do not remove the lid, which is not part of the user can use.
If the product of the shell is missing, please do not run product.
Do not stuff the products to the dimmer package.Guarantee that the product in the
ventilate place ,and maintained between the product and the wall 6 feet (15 cm)
distance.
If damaged, please do not run product.
If the long-term non-use products, please disconnect the power.
Make sure the product located in a safe and stable place.
Special attention to the power cord from being pinched or out of product.
Cleaning:In accordance with the manufacturer's recommendation to clean products’
fixed position. Please read the "cleaning" in detail.
Heat output
Devices should be away from heat sources such as radiator, heater, warm furnace or other
devices generate heat.

3
www.szbecen.com
In the following circumstances, the fixed installations are required to qualified service
personnel overhaul:
A. When the power cord or plug is damaged.
B. The product fall or when the liquid outflow the device.
C. When the device does not work correctly, or have some change in the exhibition.
Installation of power
At the time of switching in power, make sure that the voltage in your area is consistent
with the the led spot light’s voltage. This for AC110-240V. Since different parts of the
voltage is different, so products in operation, make sure your wall outlet voltage consistent
with the product.
DMX combination
In order to ensure a fixed DMX data transmission, when using several DMX device to the
fullest extent possible use the shortest cables. Fixtures connected to the DMX channel
order does not affect the choice of DMX. For example:when the allocation of fixed
installations DMX 1 channel, DMX will be located in any location, in the front, back or
middle of anywhere. When the fixed installations assigned to DMX 1 channel, whether it
is located in which of the DMX channels, DMX controller is aware that the data sent on
the channel one.
Usage mode
You can use the following four ways:
Automatic ---- This section will automatically operate through a variety of colors .
RGBW Mode ---- select a color or a different color in order to maintain the same state.
DMX control mode --- This function will be under the standard of DMX512 controller, let
you control each device separately.

4
www.szbecen.com
LED display
The digital display like below:
A: Menu
B: Up
C:DOWN
D:Enter
A B C D
No
LED display
function
1
A001
6/9/10CH DMX address
2
CP00
Color change
3
CC00
Color Jump change
4
DE00
Color Pulse change
5
SOUD
Sound mode
6
R255
Red
7
G255
Green
8
B255
Blue
9
W255
White
10
Y255
Amber
11
U255
Purple
Channel table
6 Channel mode
CHANNEL
VALUE
FUNCTION
CH1
0~255
Red
CH2
0~255
Green
CH3
0-255
Blue
CH4
0-255
White
CH5
0-255
Amber
CH6
0-255
Purple

5
www.szbecen.com
9 channels mode
CHANNEL
VALUE
FUNCTION
CH1
0~255
Dimmer
CH2
0~255
Red
CH3
0~255
Green
CH4
0-255
Blue
CH5
0-255
White
CH6
0-255
Amber
CH7
0-255
Purple
CH8
0-255
Strobe slow-fast
CH9
0-255
Pulse strobe:0-5 no effect,
6-255 pulse strobe (CH1-CH7 value is
255)
10 channels mode
CHANNEL
VALUE
FUNCTION
CH1
0~255
Dimmer
CH2
0~255
Strobe slow--fast
CH3
0-255
0-50：DMX control
51-100：Color jump change
101-150: Color change gradually
151-200：color pulse change
201-255：sound activate
CH4
0-255
Speed slow-fast
CH5
0~255
Red
CH6
0~255
Green
CH7
0-255
Blue
CH8
0-255
White
CH9
0-255
Amber
CH10
0-255
Purple
RDM: Address and channel mode can be changed by RDM controller or MA support
RDM.

6
www.szbecen.com
Cleaning
As the smoke and dust corrosion, internal and external vision lens must be cleaned out to
make the light output power optimization.
1. Use the glass cleaner and soft cloth to clen the package.
2. Every 20 days, use the glass cleaner and soft cloth to clean the external lens.
3. When you insert the power is always to ensure that every part of the product dry.
When Fixtures run, require regular cleaning according to the different environments.
Troubleshooting
The following are some common problems encountered and the solutions when the
customers use it:
For there is no response to DMX
Check the DMX cable is properly connected (pin3 as follows: "hot", in other DMX
devices, pin2 are also as follows: "hot" means.
For the voice made no reply
Sound is too small or too high-profile voice can not make it up and running. If this
problem persists, please contact your vendor for help.
Description
This item is a model of the control of several kinds of audience spot light. This light
widely used in mobile DJ and clubs. This aspect can be used alone or as part of a
voice-activated to run through several kinds of mode control.
Maintenance
1. Please keep the light in dryness and avoiding use in wet place.
2. Using intermittenlly can be extended the life.
3. Attention to clean the fan and lens usually in order to get the ventilating effects
and lighting effects better.
4. Please do not wipe the crust using organic menstruum avoiding to damage the product.

7
www.szbecen.com
Statement
The product has well capability and intact packing when leave factory. All of the user
should comply with above warning item and manual,any misuse cause of the damages are
not included in our guarantee,and also can’t be responsible for any malfunction & problem
owing to ignore the manual. Please forgive that we will not be notice for technical change.
ShenZhen BECEN Stage Equipment Co., Ltd
Add: Room 501,5th floor,Yishenrong industrial park,Xihuan road,
ShaJing,BaoAn,Shenzhen,GuangDong,China
Website: www.szbecen.com
www.becenstage.com
Tel: [phone]
Email: [email protected]
[email protected]