BED BATH & Beyond GSI22X3 User manual

ASSEMBLY INSTRUCTIONS
TV Stand
ITEM# GSI22X3
P.1
If you find any damage after opening, please be sure to take pictures of the damage
and contact us. We will help you solve the problem as soon as possible.

P.2
VllI. Concealed hinges are three-way adjustable.
Horizontal
by screw adjustment
In-and-Out
by loosening the hinge-arm
mounting screw or via cam
adjustment
Vertical
Via slots in the mounting
plate or via cam adjustment
Door
Side panels Side panels Side panels
Door Door
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are : wood
dowels , screws and bolts.
V. A Phillips head screwdriver is required for the assembly of this product .
Vl. Power tools should not be used to assemble this product .
II. Follow each step carefully to ensure the proper assembly of this product.
21
VII. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
Assembly the furniture on empty carton, carpet, or rug to prevent scratches or
damage.
VllII.

Parts List
P.3
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
T
M
Q
P
R
S
Q
Q
Q
QQ
Q
Q

Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
Philips head screwdriver required for assembly
(not included)
P.4
1
2
3
4
5
6
7
8
9
10
Wooden dowel 20
Ø8x30 pcs
Cam boltØ6x32 pcs
20
Ø15x9.5 Cam lock pcs
20
Sticker pcs
20
Handle bolt
Ø4x18 pcs
8
4
Handle pcs
Ø3x12 Screw pcs
30
Shelf support pin pcs
12
Bolt
Hinge
Ø4x12
pcs
8
pcs
48
13 2pcs
2pcs
Nut
Screw
Ø4x25
Screw
Ø3x16 2pcs
2pcs
11 1
Bolt
M6x15mm pcs
32
wrench
M4 mm
12
Glue tube 1pcs
14
pcs
Strap

P.5
Step 1
11: 1 pcs
Step 2
2: 8 pcs
12: 32 pcs
11
12
12
12
12
12
B
Q
Q
Q
Q
Q
Q
Q
12
B
2
2
2
2
Screw cam bolts (2) into bottom panels (B).
Use bolt(12) with lock wasker and flat wasker secure
part(Q) to part(B) by using Hex key(11) as per diagram

P.6
Step 3
1: 8 pcs
Step 4
2: 4 pcs
1: 8 pcs
EH
FG
Insert wooden dowels (1) into panels (E,H).
Insert wooden dowels (1) into parts(F,G). Securely screw the cam bolts(2) on
1
1
1
1
1
1
1
1
1
2
1
1
1
2
2
1
1
12
1
parts(F,G) with a Philips screwdriver as per diagram.

P.7
Step 5
2
2
2
2
2
A
C
D
Step 6
3: 4 pcs
E
CF
3
3
21 3
Note ：
Please don't over-tighten the cam lock
otherwise it will be broken.
Insert wooden dowels(1) into parts(C,D). Securely screw
C
E
Using cam locks(3) attach part (C) to part(E)
3
3
and then using cam locks(3)attach the other
side of part (C) to part (F)with
a Philips screwdriver as per diagram.
2: 8 pcs
1: 4 pcs
1
1
1
1
the cam bolts(2) on parts(A,C,D) with a Philips screwdriver
as per diagram.
,

P.8
Step 7
H
D
G
3
3
3: 4 pcs 21 3
Note ：
Please don't over-tighten the cam lock, otherwise, it will be broken.
D
H
3
3
Using cam locks(3) attach part (D) to part(H)
and then using cam locks(3)attach the other
side of part (D) to part (G)with
a Philips screwdriver as per diagram.

P.9
Step 8
C
E
F
D
G
H
B
3
3
3
3
3
3: 8 pcs 21 3
Note ：
Attach panels (E,F,G,H) to bottom panel (B) using cam bolts and dowels
as guides. Insert cam locks (3) into panels (E,F,G,H) and tighten with a
screwdriver
Please don't over-tighten the cam lock, otherwise, it will be broken.

P.10
Step 9
3
3
3
3: 4 pcs
D
G
H
E
F
B
A
21 3
Note ：
C
Attach top panel (A) to the assembly using cam bolts and dowels as
guides. Tighten cam locks (3) with a screwdriver.
Please don't over-tighten the cam lock, otherwise, it will be broken.

P.11
Step 10
5
A
D
C
E
T
I
J
K
L
Attach parts(J,L
with part (K) as
per diagram.
J
K
L
5: 30 pcs
Attach back panels (I,J,K,L,T) to the assembly from the previous step
using screws (5). Note that back panels (J,K,L) will overlap back panel (I).

P.12
Step 11
4
6
6
66
6
6: 12 pcs
4: 20 pcs
A
C
D
B
E
H
Insert shelf support pins (6) into the interior of the assembly at desired shelf
heights. Place sticker (4) cover the holes.

P.13
Step 12
Finished edge
6
A
H
C
E
M
N
M
D
Carefully place shelves (M,N) on shelf support pins (6)

P.14
Step 13
4 pcs
8 pcs
8 pcs
48 pcs
7:
8:
9:
10:
8
7
8
9
10
9
10 X4
O P R S
/ / /
10
A
C
D
H
E
O
P
R
S
Using bolt (10) attach hinge (9). Handle bolt (8)
attach handle (7) into doors (O,P,R,S)
with Philips head screwdriver as per diagram.
10

P.15
Step 14
13A: 2 pcs
2 pcs
2 pcs
2 pcs
13B:
13C:
13D:
13C
13A
13C
13A
Wall
Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend
that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure
hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
WARNING
13A
Using screw (13C) attach strap
(13A) to part (C,D) with Philips
head screwdriveras per diagram.
Using screw (13D) attach plastic
strap (13A) into nut (13B) to wall
with Philips head screwdriver as per
diagram.
13C
A
C
D
EI
I
J
L
13A
13D
13B

P.16
Final Assembly
Step 15