Broyhill A601002522 User manual

ASSEMBLY INSTRUCTIONS
ITEM#: A601002522
SKU#:810550786
LINDMERE COOLER
Need help? We are here for you! 1(866)578.6569 24/ 7 • Toll Free

MAINTENANCE:
WHAT IS COVERED?
The limited warranty is extended to the original purchaser and applies to material and manufacturer’s defect provided
the item is maintained with care and used only for personal, residential purposes.
Warranty: 6 Months
WARRANTY:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
• Please read and understand this entire manual before attempting to assemble or install the product.
• Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
• Some parts may contain sharp edges. Wear protective gloves if necessary, during assembly.
• Check all nuts and bolts periodically for tightness and, when required, tighten them again.
• Pay attention to the parts orientation
• Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the
area of the construction.
•If scratched please use touch up paint, to prevent
• Do not place the product on a damp or conductive subsurface.
• Steel components for this cooler are treated with rust inhibiting paint that protects it from rusting. However, due to the
nature of steel, surface oxidation (rusting) will occur if these protective coatings are scratched. This is not a defect and
thus not covered by the warranty.
• To minimize this condition, it is recommended to use care when assembling and handling the product to prevent
scratching the paint. Should any scratching or damage occur, it is recommended to cover the scratch immediately
with rust inhibiting paint (not included).
• Do not use bleach, acid, or other abrasive cleaners on the cooler.
• Keep instruction manual for future reference.
• When not in use, store in a cool, dry area.
2/10

EXPLODED DRAWING
3/10

PARTS LIST
Label Part Number Description Qty Part Image
A P005100112 Knob 2
B P00310011001 Lid 1
C P00320001701 Body 1
KP005100102 Drain Plug
Pre-assembled 1
EP00500055601 Support Ring 1
DP00540053401 Leg 4
FP00430009001 Bottom Board 1
IP003300027 Caster 2
JP003300028 Caster With
Brake 2
4/10
HARDWARE LIST
Label Part Number Description Qty Add Part Image
H1 H010030525 Bolt M6*1220 2
H2 H010110069 Bolt M4*35 2 1
HW H090030002 Wrench M6 1 0
HW1H090010015 Wrench
M101 0

HELPFUL HINTS
• Tools needed and not included
• Separating parts before starting
How many people needed for the installation work
Provided in hardware pack Provided
5/10

STEP 1
Assembled View:
1x
16x
4x
6/10
Attached Leg (D) to Body (C) with
Bolts (H1), tighten with
Wrench (HW).

STEP 2
Assembled View:
1x
4x
7/10
Attached Support Ring (E) to Leg
(D)with Bolts (H1), tighten with
Wrench (HW).

STEP 3
Assembled View:
1x 2x 2x
Attached Caster (I), Bottom Board
(F) and Caster with brake (J) to Leg
(D),tighten with Wrench (HW1).
8/10

STEP 4
Assembled View:
2x
2x
1x
Attached Knob (A) to Lid (B) with
Bolts (H2).
9/10

STEP 5
Assembled View:
10/10
Put the assembled lid (A/B) to basin
(C).