Mocka Kenny Desk User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip over
in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend that all furniture is anchored
to a wall. We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B1 B2 C D
EFH IG
Hardware Supplied
25mm
screw x10
12mm
screw x3
bolt &
nut x13
25mm
screw x6
wall
anchor x2
wall
strap x2
14mm
screw x2
25mm
screw x2
40mm
screw x20
foot
x4
Phillips & Flathead screwdrivers required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Kenny Desk
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach 4x feet (E) to the ends of the legs. Attach the leg panels together as shown using 6x 25mm screws (B1).
Tighten with a screwdriver.
EB1
B1
E
B1
E
B1
E
B1
B1
Kenny Desk
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach 4x feet (E) to the ends of the legs. Attach the leg panels together as shown using 6x 25mm screws (B1).
Tighten with a screwdriver.
EB1
B1
E
B1
E
B1
E
B1
B1
34
Attach the central panels to the outer leg panels as shown using 3x
12mm screws (B2). Tighten with a screwdriver.
Attach panel [1] to the leg panels as shown using 4x 25mm screws (B1)
and 6x 25mm screws (C). Tighten with a screwdriver. Insert 3x bolts (A)
into panel [1].
B2
B1
C
C
B1
C
B2
B1
C
B2
B1
C
C
1
A
A
A
Kenny Desk
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach panels [6] and [7] to panel [4] using 3x bolt and nut sets (A). Attach
panels [5], [6] and [7] to panel [2] using 5x bolt and nut sets (A). Secure panels
[4] and [8] through the back of panel [5] with 6x 40mm screws (D). Attach
panel [3] to panel [5] using 2x bolt and nut sets (A). Tighten with a screwdriver.
Attach the assembled panels to panel [1] as shown using 3x locking nuts
(A) and 14x 40mm screws (D). Tighten with a screwdriver.
A
A
2
1
8
7
6
5
4
3
8
7
6
5
4
3
8
7
4
2
6
8
A
A
A
A
A
D
D
D
D
D
D D
A
A
A
DD
D
D
D
D
D
D
D
D
D
D
A
A
A
A
A
A
Kenny Desk
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach panels [6] and [7] to panel [4] using 3x bolt and nut sets (A). Attach
panels [5], [6] and [7] to panel [2] using 5x bolt and nut sets (A). Secure panels
[4] and [8] through the back of panel [5] with 6x 40mm screws (D). Attach
panel [3] to panel [5] using 2x bolt and nut sets (A). Tighten with a screwdriver.
Attach the assembled panels to panel [1] as shown using 3x locking nuts
(A) and 14x 40mm screws (D). Tighten with a screwdriver.
A
A
2
1
8
7
6
5
4
3
8
7
6
5
4
3
8
7
4
2
6
8
A
A
A
A
A
D
D
D
D
D
D D
A
A
A
DD
D
D
D
D
D
D
D
D
D
D
A
A
A
A
A
A
78
H
I
Once assembled, lift furniture into the desired position against a wall, do
not drag. Attach 2x wall straps (I) to the back sides of panel [1] and
secure with 2x 14mm screws (G). Fasten to wall using 2x wall anchors
(H) and 2x wall screws (F). Tighten with a screwdriver.
Safety Straps
F
Ensure unit is balanced and steady before use. You’re done, enjoy!
G
I
Kenny Desk
Assembly Instructions
5
mocka.co.nz | mocka.com.au