
Vacuum Cleaner / User Manual 9 / EN
4Cleanng and care
Swtch off and unplug the applance before
cleanng t.
AWARNING:
Never use gasolne,
solvent, abrasve cleanng agents,
metal objects or hard brushes to
clean the applance.
4.1 Replacng the dust bag
When the dust bag s full, the dust bag fullness
ndcator (16) wll turn red.
1. Open the top ld by pressng the button for
openng the dust contaner (12).
2. Remove the dust bag from the dust contaner
by pullng t upwards.
3. Remove the dust bag from ts gude by pullng
t from ts tray.
4. Dspose the full dust bag.
5. Holdng ts tray, push the new dust bag nto the
bag holder. Ensure that t s fully seated.
6. Place back the dust bag holder nto ts place n
the dust contaner.
7. Close the upper cap of the applance.
AWARNING:
Do not force the top
ld to close t, otherwse the plastc
parts can be damaged.
A
WARNING:
Dust bags provded
from locatons other than the
authorzed dealers and servces are
not orgnal. Such dust bags have a
lesser qualty and they become torn
n a shorter perod and render your
applance non-operatonal. Faults
caused by usng unauthentc dust
bags are not covered by the scope of
the warranty.
AWARNING:
Do not wash the dust
bag.
4.2 Cleanng the flters
After each 5 dust bag replacement (may vary
dependng on the frequency and area of usage),
clean the flters.
AWARNING:
Donotuseapplances
producng hot ar such as har dryer
or heater to dry the
flters.
A
WARNING:
Do not nstall the
flters wthout completely dryng
them; otherwse, smell of mosture
may occur durng use, water can leak
from the back of the applance or the
flters may get damaged.
AWARNING:
Attach the flters nto
ther places after they have dred.
4.2.1 Motor protecton flter
1. Open the top ld by pressng the button for
openng the dust contaner (12).
2. Pull out the flter tray.
3. Remove the foam flter from the grd nsde.
4. After washng the motor protecton flter under
runnng water, wrng t out slghtly and leave t
to dry (for 24 hours mnmum).
4.2.2 HEPA flter
1. Open the HEPA flter cover whch s on your
applance and remove the HEPA flter by pullng
t from ts handle.
2. Shake off the HEPA outlet flter to elmnate the
dust on t. After that, you can wash t by holdng
ts clean sde under runnng cool water.
3. If you wash the HEPA flter, dry t at room
temperature (for 24 hours mnmum). Do not
use t before ensurng that t s completely dry.