Beko WDC 7523002 User manual

Operating Instructions - Washer Dryer BEKO WDC 7523002
Description of appliance
Display symbols
1. Programme selection knob
2. Temperature selection lights
3. Spin speed selection lights
4. Display
5. Drying Programme Lights
6. On/Off button
7. Start/Pause button
8. End time adjustment button
9. Drying level adjustment button
10. Auxiliary Function buttons
11. Spin speed adjustment button
12. Temperature adjustment button
13. Programme Selection lights

a) Washing indicator
b) Rinsing indicator
c) Spinning indicator
d) Drying indicator
e) End indicator
f) No water indicator
g) Duration information display
h) Loading door lock indicator
i) Child lock indicator
Using the detergent drawer
The detergent drawer is composed of three compartments:
1. Prewash
2. Main Wash
3. Fabric softener
Selecting the washing programme
1. Determine the programme suitable for the type, quantity and soiling level of the laundry in accordance with the
“Programme and consumption table”.
2. Select the desired programme with the Programme Selection knob.
Washing programme
Depending on the type of fabric, use the following main programmes:
Cottons, Synthetics, Woollens, Cottons Eco, Delicates, Hand Wash, Daily Quick, Super Short and Shirts.
Rinse: Use when you want to rinse or starch separately.
Spin + Drain: Use to drain the water in the machine

Temperature selection
Whenever a new programme is selected, the recommended temperature for the programme appears on the
temperature indicator. It is possible that the recommended temperature value is not the maximum temperature that
can be selected for the current programme. Press the Temperature Adjustment button to change the temperature.
Spin speed selection
Whenever a new programme is selected, the spin speed recommended for the selected programme is displayed on
the Spin Speed indicator. Press the Spin Speed Adjustment button to change the spin speed. Spin speed decreases
gradually. Then, depending on the model of the product “Rinse Hold” and “No Spin” options appear on the display.
If you want to spin your laundry after the Rinse Hold function:
-Adjust the Spin Speed.
-Press Start/Pause/Cancel button. The programme resumes. Machine drains the water and spins the laundry. If
you want to drain the water at the end of the programme without spinning, use the No Spin function. You can
also change the Spin Speed after the washing starts. You can select spin speed by pressing spin speed adjustment
button after washing has started but before the spinning step.

Auxiliary function selection for drying
When a new programme is selected, press Auxiliary Function Selection button to adjust the drying option that is
suitable for the selected washing programme.
Drying Programmes
Starting the programme
1. Press Start/ Pause button to start the programme
2. The light of Start/Pause button which was flashing starts to illuminate, indicating that the programme has started.
3. Loading door is locked. “Locking the Door” appears on the display when the door is being locked.
End of programme
When the programme is over the End of Programme indicator illuminates and a buzzer is heard. If you do not press
any button for 2 minutes, the machine will switch to standby mode. The display and all indicators are turned off. If
you press any button or turn the Programme Selection knob when the machine is in standby mode, programme
steps that are completed will appear on the display.