Belkin F5U303 User manual

Belkin Tech Support
US: 310-898-1100, ext. 2263
800-223-5546, ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Europe: www.belkin.com/support
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
[phone]
[phone] fax
© 2007 Belkin International, Inc. All rights reserved. All trade names
are registered trademarks of respective manufacturers listed. Windows
and Windows Vista are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.
P75590-A
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk, The Netherlands
[phone]
[phone] fax
Belkin Ltd.
4 Pioneer Avenue
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
[phone]
[phone] fax
Wireless USB Hub

User Manual
F5U303
Wireless USB Hub

1. Introduction
....................................................................
1
Features
........................................................................
2
System Requirements
...................................................
2
Package Contents
.........................................................
2
Product Description
......................................................
3
2. Installation
......................................................................
4
PIN-Association Procedure
...........................................
5
Cable-Association Procedure
.......................................
6
3. Operation
........................................................................
9
Proper Orientation of Antennas
....................................
9
Using the Wireless USB Manager
...............................
10
Options
..................................................................
11
System Tray
.................................................................
15
4. Maintenance
.................................................................
16
Troubleshooting
...........................................................
16
Support for USB Classes
............................................
19
5. Technical Specifications
................................................
20
6. Information
...................................................................
21
Table of Contents

E

1
Introduction
1
2
3
4
5
6
Congratulations and thank you for purchasing the Belkin
Wireless USB Hub. This revolutionary product lets you
connect your USB devices to your computer—wirelessly.
Now you can print, play music, scan, download photos,
and burn CDs, without the hassle of connecting cables. The
Hub is easy to use and gives you the freedom to roam—and
stay connected.
Please review this User Manual carefully so that you are sure
to get the most from your Wireless USB Hub.
Wireless USB Hub

2
Introduction
1
2
3
4
5
6
Features
• Wireless connectivity through USB technology for printers,
cameras, hard drives, and other USB devices to
your computer
• Reduced cable clutter
• Ports for linking up to 4 high-, full-, and low-speed devices
with your computer
• Belkin Lifetime Warranty
System Requirements
• Windows Vista
TM
32-/64-bit operating system
Package Contents
• Wireless USB Hub
• Power Adapter
• USB Cable (A to mini-B)
• User Manual
• Quick Start Guide

3
Introduction
1
2
3
4
5
6
Product Description
Downstream USB Ports: 4
Per-Port Voltage: 5V
Per-Port Current: 500mA
Power Mode: Self-powered
Power Supply:
Input: 100–240 50/60Hz
Output: 5V DC, 3A
Plug Size: 3.5mm
Plug Polarity: Center-pin positive
LED Indicators on Hub:
Wireless Status LED
Color: Blue
Status: Constant on, when power supply is connected;
blinks to indicate a wireless connection
USB Port Status LED
Color: Green
Status: Off: No USB device plugged in
(or device not enumerated)
Green: USB device enumerated

4
1
2
3
4
5
6
Installation
Association Procedures
Two methods exist to assist you in setting up the wireless
security and association with your Hub: PIN and Cable.

5
Installation
1
2
3
4
5
6
PIN-Association Procedure
When you initially set up the Hub, you must “associate” it
with the host computer. To do this, enter the PIN (product
identification number) found on the bottom of the Hub into
the Wireless USB Manager. This “PIN association” procedure
is one of two supported methods to establish a secure
wireless connection.
1. Plug the power supply into the wall, and then plug the
DC connector into the Hub.
2. Open the Wireless USB Manager to set up the
Hub’s security.
3. Click on “New Connection”.
4. Select “PIN Association” and click “Next”.
5. Enter the PIN into the space provided. The PIN can be
found on the bottom of the Hub.
6. The Wireless USB Manager will automatically detect the
Hub and provide customization options for the device
name and method of detection.
7. Click “Finish” to complete the setup and remove the
USB cable.
8. Verify that you have established a wireless connection
through the Wireless USB Manager. You should have an
icon for the Hub showing two arrows pointing to
each other.
9. Station the Wireless USB Hub in range and connect your
devices to access them wirelessly.

6
1
2
3
4
5
6
Installation
Cable-Association Procedure
When you initially set up the Hub, you must “associate”
it with the host computer. To do this, connect the Hub to
your computer using the provided USB cable. This “cable
association” procedure is the second optional method of
establishing a secure wireless connection.
1. Plug the power supply into the wall, and then plug the
DC connector into the Hub.
2. Attach the Hub to your computer using a standard USB
cable (mini-B to USB-A connector).
3. Open the Wireless USB Manager to set up the
Hub’s security.
4. Click on “New Connection”.
5. Select “Cable Association” and click “Next”.
6. The Wireless USB Manager will automatically detect the
Hub and provide customization options for the device
name and method of detection.
7. Click “Finish” to complete the setup.
8. Verify that you have established a wireless connection
through the Wireless USB Manager. You should have an
icon for the Hub showing two arrows pointing to
each other.
9. Station the Wireless USB Hub in range and connect your
devices to access them wirelessly.

7
Installation
1
2
3
4
5
6
Automatic Connect Feature
When the association procedure is completed, the Hub
by default automatically connects to the host computer
whenever it is within operating range. If desired, you can
select another method for how the Hub will wirelessly
connect to your computer. This setup may be changed later.

1
2
3
4
5
6
Installation
888
Confi rming Proper Installation
To confirm that the Wireless USB Hub is properly installed,
check the Windows Device Manager. In the Device Manager,
you should see: “Belkin Wireless USB Hub” and “Dell
Wireless 400 Host Wire Adapter”.

999
Operation
1
2
3
4
5
6
Proper Orientation of Antennas
By design, Ultra-Wideband technology (UWB) radios
transmit at very low power levels. To achieve peak
performance, it is important to properly orient the antennas
on the Hub and your laptop.
As a general rule, the antennas should be positioned in
a vertical orientation relative to the horizontal plane. As
the antenna is integrated behind the laptop screen, we
recommend maintaining the screen vertical for optimal
wireless communication. Please see the illustration above
for an explanation. We also recommend that you place the
antennas in a direct line-of-sight orientation.

10
Operation
1
2
3
4
5
6
Using the Wireless USB Manager
The user interface for the Wireless USB Manager consists of
a window with three buttons. These buttons are:
• Settings
• Device
• Help
These three buttons within the Wireless USB Manager will
provide diagnostics, options, customization, and help with
your Wireless USB Hub. Clicking on the “Settings” button
will allow you to add a new connection and more through
the “Options” button.

11
Operation
1
2
3
4
5
6
Options
There are three tabs in the “Options” section of the Wireless
USB Manager.
General:
This section will show the computer name
associated with your laptop as well as the MAC (media
access control) address of the internal Wireless Host
Adapter. There is also a toggle button to enable and disable
the internal Wireless USB Adapter.

12
Operation
1
2
3
4
5
6
Diagnostics:
This section of the utility will allow you to
diagnose problems related to the wireless connection.
Check the desired boxes and click “Run” to perform the
diagnostics test. The log will generate detailed information
on the status of the hardware.

13
Operation
1
2
3
4
5
6
Advanced Options:
This section offers a power
management option as well as the ability to change channels
and throughput enhancements. If you are experiencing
wireless connection problems, you may want to try changing
the wireless channel. For optimal performance, use
channel 13.

14
Operation
1
2
3
4
5
6
The icon on the main screen of the Wireless USB Manager
will show your connection status and will allow you to
disconnect from the Hub or delete a wireless entry. You
can also choose the connection mode with the Hub. These
options include Automatic, Prompt to Connect, or Manual.
The icon for the Wireless USB Hub is not fixed and can be
changed if desired. Right-click on the icon to display
these options.

15
Operation
1
2
3
4
5
6
System Tray
When the Wireless USB Manager is running, the “Wireless
USB Manager” icon displays in the Windows System Tray.
Place your mouse over the icon to see whether the radio is
enabled or disabled.
Right-clicking this icon gives you the option to exit the
application, hide/show the application window, disable/
enable the radio, or access Help and About information.
Double-clicking this icon will bring up the “Wireless USB
Manager” application window. Alternatively going to
“Start > Programs > Dell WUSB > Wireless USB Manager”
can be used to launch the application.