Bell'O ATC402E User manual

ATC402E
AUDIO/VIDEO COMPONENT TOWER
ASSEMBLY INSTRUCTIONS

Twin-Star International Inc. will not be responsible for fail re to assemble as directed or for the improper assembly, se or handling of this stand.
fOR yO R SAfETy, PLEASE fOLLOw ThESE PRECA TIONS:
! Do not P Ace Items on tHe sHe ves wHIcH eXceeD tHe mAXImum weIGHt ImIts oF 75 bs. For toP sHe F,
AnD 50 bs. For eAcH InterIor sHe F.
A wAys P Ace tHe HeAvIest comPonents on tHe bottom sHe F.
! ALWAYS Re ove ALL ITe S FRo THe GLASS SHeLveS PRIoR To ovING THe FuRNITuRe.
! ALWAYS Re ove THe SHeLveS PRIoR To ovING THe FuRNITuRe.
! WHeN IN uSe, THIS FuRNITuRe uST Be PLACeD oN A FLAT, SoLID AND LeveL SuRFACe.
! Do NoT LeAN oN THe STAND oR oN ANY eQuIP eNT THAT IS oN THe STAND.
! Do NoT CLI B oR STeP oN THe STAND oR ANY SHeLF oN THe STAND.
! Do NoT BANG INTo oR PLACe YouR oWN WeIGHT oN ANY GLASS SHeLF.

PARTS LIST
#
MX1E
MX2E
MX3E
MX4E
MX5E
MX6E
1
1
1
1
1
1
Quantity
Part
#
MX7E
MX8E
MX9E
MX10E
MX11E
MX12E
MX13E
2
3
8
12
8
1
2
Quantity
Part
3

Fig. 1
Fig. 1A
MX2E
MX5E
MX3E
MX9E
MX9E
1. PLACE the Cabinet Base (MX5E) on a flat,
solid floor surface as shown.
2. INSERT two Wood Dowels (MX9E) into the
predrilled holes along the left edge of the
Cabinet Base (MX5E) and ATTACH the
Left Side Panel (MX2E) to the
Cabinet Base as shown. LOCK the
pieces together by FLIPPING the
switches on the Locking Mechanisms as
shown in Fig. 1A.
3. INSERT two Wood Dowels (MX9E) into the
predrilled holes along the right edge of
the Cabinet Base (MX5E) and
ATTACH the Right Side Panel (MX3E) to
the Cabinet Base as shown. LOCK the
pieces together by FLIPPING the
switches on the Locking Mechanisms as
shown in Fig. 1A.
ASSEMBLY INSTRUCTIONS
NOTE: 2 PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS FURNITURE. TO AVOID DAMAGE DURING ASSEMBLY, IT SHOULD BE ASSEMBLED ON A
SOFT SURFACE.
(View from Rear)
4

Fig. 2
Fig. 2A
MX4E
4. ATTACH the Rear Frame (MX4E) to the Left and Right Side Panels (MX2E, MX3E) and to the Cabinet Base (MX5E) as shown using
six Thumb Screws (MX11E). TIGHTEN Thumb Screws firmly by hand.
(View from Rear)
MX2E
MX5E
MX3E
MX11E
5
MX11E

Fig. 3 Fig. 3A
Fig. 3B
MX1E
5. INSERT four Wood Dowels (MX9E) into the predrilled holes along the top edges of the Left and Right Side Panels (MX2E, MX3E) and ATTACH the
Cabinet Top (MX1E) to the Left and Right Side Panels as shown. LOCK the pieces together by FLIPPING the switches on the Locking Mechanisms on
both sides as shown in Fig. 3A. NOTE (!) : You MAY need to flip the Locking Mechanisms first to correctly position the Locking Posts in order
to get the Top Shelf to fit properly onto the cabinet.
6. SECURE the Cabinet Top (MX1E) using two Thumb Screws (MX11E) as shown. TIGHTEN Thumb Screws firmly by hand.
(View from Front)
MX3E
MX2E
MX9E
MX9E
MX11E
6
MX11E

Fig. 4
7. ATTACH the Top and Bottom Rear Panels (MX7E) to the Rear Frame (MX4E) as shown above. PRESS firmly into place.
(View from Rear)
MX7E
MX4E
7

Fig. 5
8. INSERT twelve Shelf Support Pins (MX10E) into the predrilled holes in the Left and Right Side Panels (MX2E, MX3E) as shown.
Use four Shelf Support Pins for each Interior Shelf (MX8E). MAKE SURE the Shelf Support Pins are placed in level positions,
and that each Shelf is evenly and properly supported by four Shelf Support Pins.
MAKE SURE THE ATC402 CABINET IS ON A SOLID AND LEVEL FLOOR SURFACE BEFORE USE. MAKE SURE ALL SHELVES
ARE LEVEL AND PROPERLY SUPPORTED BEFORE PLACING ANY COMPONENTS ON THEM.
(View from Front)
MX8E
MX3E
MX2E
MX10E
8

Fig. 6
9. ATTACH the Door (MX6E) to the Left Side Panel (MX2E) as shown above. PLACE the metal hinge on the Door over the metal bracket
on the Left Side panel, the pieces interlock together. NOTE: (!): A philips-head screwdriver can be used to straighten the door
after installation.
10. ATTACH the Door Knob (MX12E) to the front of the Door (MX6E) using the Screw (MX13E) as shown above.
Tighten, but be careful not to overtighten.
(View from Front)
MX2E
MX6E
MX12E
MX13E
(!)
9