Belling IB609PYRO User manual

www.belling.com.au
IB609PYRO
Built-in 60cm Multi-function
Pyrolytic Oven with Visio Display
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE UNIT.

www.belling.com.au
CONTENTS
WARNINGS AND PRECAUTIONS 1
PARTS AND ACCESSORIES 3
OPERATION 4
Before First Use 4
Controls 5
Functions 5
Thermostat 8
Visio Display 8
Accessories 10
Cooking Guide 11
CLEANING AND MAINTENANCE 12
Cleaning 12
Maintenance 14
Disposal 14
INSTALLATION 15
Location and Dimensions 15
Wiring 17
TECHNICAL & REFERENCE DATA 18
Model Specications 18
Warranty 18

1
IMPORTANT INFORMATION
Prior to installation, ensure the local distribution conditions (electricity
voltage and frequency) and the requirements stated on the label of the
appliance are compatible.
CAUTION
• Install this oven only in accordance with the installation instructions provided.
This appliance should only be installed by a qualied technician. Incomplete or
improper installation could lead to safety issues and make your warranty void.
• Do not store or use this appliance outdoors. This appliance is designed only for
cooking food and not for any other purpose.
• Accessible parts may become hot during use. When opening the oven door,
step back to avoid the hot steam coming out of the oven. Always use oven
gloves to remove food from the oven.
• When the oven door is open, do not leave anything on it as this may damage
the appliance’s hinges or door.
• Do not put ammable or ignition goods (nylon, plastic bags, paper, cloth, etc.)
in the oven. This includes cookware with plastic accessories (e.g handles).
• Do not hang towels, dishcloths or clothes from the appliance or its handles.
• Do not try to lift or move the appliance by pulling the door handle.
• The trays incline when pulled out. Take care not to spill hot food while removing
cooking accessories from the oven.
• Make sure the control knobs are in the ‘0’ (off) position when not in use.
• Do not remove the control knobs to clean the control panel.
• Keep cord away from heated surfaces, and do not cover any vents on the
oven. Do not let the cord hang over edge of table or counter. Keep the
appliance and its cord out of the reach of children.
• If the power cord is damaged, it must be replaced by an authorised service
agent in order to avoid a hazard.
• If the surface is cracked, switch off the appliance until repaired to avoid the risk
of electric shock.
• Ensure the appliance is switched off before replacing the light to avoid the risk
of electric shock.
WARNINGS & PRECAUTIONS

2
• It is hazardous for anyone other than an qualied service agent to carry out any
service or repair operation. Having repairs undertaken by anyone other than a
Belling certied service agent will make your warranty void.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
• The appliance is not intended to be operated by means of an external timer or
separate remote-control system.
• The appliance must be installed in accordance with national wiring regulations.
• Do not use the oven cavity for storage purposes. It is dangerous to store items
on the appliance’s cooking surfaces.
• Failure to maintain the oven in a clean condition could lead to deterioration of
the surface that could adversely affect the life of the appliance and possibly
result in a hazardous situation.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven
door glass and other surfaces as this can lead to damage.
• Do not use steam cleaners to clean the appliance.
• Do not operate the appliance until it has been fully installed.
• If you will not use the appliance for a long time, unplug it and keep the main
control switch off.
• Protect your appliance from atmospheric damage by ensuring it is not affected
by sun, rain, snow, dust etc.
IMPORTANT
To maintain the efciency and safety of your appliance, we
recommend you to always use original spare parts and authorised
service agents. For either of these services please call the Customer
Care Centre on 1300 556 816 (AU) / [phone] (NZ).
WARNINGS & PRECAUTIONS

3
1. Control panel
2. Handle
3. Door glass
4. Tray
5. Lower Heating Element
6. Upper Heating Element
7. Wire Grill
8. Racks
9. Oven light
10. Turbo Heating Element
11. Fan
12. Air Outlet Shutters
PARTS AND ACCESSORIES
5
4
6
7
8
9
10
11
12

4
OPERATION
BEFORE FIRST USE
• Please read these instructions carefully before use and keep them for
future reference.
• Remove any protective lms from the appliance surfaces and all
materials from the carton and oven cavity.
1. Remove all accessories and wash out the cavity.
2. New appliances typically smell when rst used. ‘Burn’ the appliance off
by heating the empty oven on the maximum temperature for at least 45
minutes.
3. Make sure that the room is well ventilated, close the doors to the other
rooms to avoid odours pervading the house.
4. Let the appliance cool down to room temperature. Make a solution
of detergent mixed with hot water to clean inside the oven, then wipe
dry with a clean soft cloth. Keep the door open until the oven cavity is
completely dry.
The time must be adjusted before starting to use the oven. When the oven
has been powered up the display will show 00:00. To adjust the time,
Press or hold the and simultaneously until the begins ashing.
Use the and to adjust the day’s time while is ashing. Hold or
to go through the numbers faster. Once you have selected the correct time,
leave it - the will stop ashing and the appliance will beep to indicate the
time is locked in.

5
CONTROLS
Function Control Knob Thermostat Control KnobTemperature
Timer/Clock
Time setting/Lock
Time setting/Tone selector
Mode
Alarm
Oven function
FUNCTIONS
OPERATION
Off
Defrost
Conventional
Dual Grill
Intensive Bake
Single Grill
Fan ForcedFan Grill
Pyrolysis
Defrost
The fan starts operating. To use this function, take your frozen food and place it in
the oven on a shelf on the third slot from the bottom. It is recommended that you
place an oven tray under the defrosting food to catch the melting ice. This function
will not cook or bake your food, it will only help to defrost it.
Oven Light
The light remains on during all functions.

6
OPERATION
Conventional Oven
The lower heating elements and upper heating elements will start operating. This
function emits heat, ensuring even cooking of the lower and upper food. This is
ideal for making pastries, cakes, baked pasta and lasagne. It is best to cook on
one shelf at a time with this function. It is recommended to pre-heat the oven for
approximately 10 minutes.
Intensive Bake
The lower heating elements, upper heating elements and fan will start operating.
This function is ideal for obtaining results in baking pastry. Cooking is carried out by
the lower and upper heating elements within the oven and by the fan providing air
circulation, which will give a slight grill effect to the food. It is recommended to pre-
heat the oven for approximately 10 minutes.
Single Grill
The grill heating element will start operating. This function is ideal for grilling and
toasting foods, use the upper shelves of the oven. Lightly brush the wire grid with
oil to stop foods sticking and place foods in the centre of the grid. Always place a
tray underneath to catch any drips of oil and fat. It is recommended to pre-heat the
oven for approximately 10 minutes.
When grilling, the oven door must be closed and the oven temperature should
be set to 190-200°C.
Fan Forced
The ring heating element and fan will start operating. This function evenly disperses
the heat in the oven. All foods on racks will be cooked evenly. It is recommended to
pre-heat the oven for approximately 10 minutes.

7
OPERATION
Dual Grill
The grill heating element and upper heating elements will start operating. This
function is ideal for faster grilling and for covering a larger surface area, such as
grilling meats. Use the upper shelves of the oven. Lightly brush the wire grid with oil
to stop foods sticking. Always place a tray underneath to catch any drips of oil and
fat. It is recommended to pre-heat the oven for approximately 10 minutes.
When grilling, the oven door must be closed and the oven temperature should
be set to 190-200°C.
Fan Grill
The grill heating element, upper heating elements and fan will start operating. This
function is ideal for faster grilling of thicker foods and for covering a larger surface
area. The fan will ensure even cooking. Use the upper shelves of the oven and
place foods in the centre of the grid. Lightly brush the wire grid with oil to stop
foods sticking. Always place a tray underneath to catch any drips of oil and fat. It is
recommended to pre-heat the oven for approximately 10 minutes.
When grilling, the oven door must be closed and the oven temperature should
be set to 190-200°C.
Pyrolytic Cleaning
This function allows you to clean the inside of the oven thoroughly by burning off
residue. The oven cavity is coated with a special enamel that is resistant to high
temperatures. During the pyrolytic cleaning operation, the temperature inside the
oven can reach about 475°C. This function does not clean the glass of the oven
door, this should be cleaned manually before using the pyrolytic function. Turn to
page 12 for cleaning instructions.
Before activating the pyrolytic cleaning function, remove any excessive spillage.
Make sure the oven is empty - remove all wire shelves, shelf supports, racks, trays
and any other accessories.
While the pyrolytic cleaning is operating, the oven door will automatically lock for your
safety. The temperature will display . It is normal during this function for a smell
and some fumes to emanate, this is due to the destruction of food residue within the
oven. These fumes could be fatal to birds, pets should be kept away until the
operation is complete.

8
OPERATION
THERMOSTAT
After setting the cooking function you will need to
set the desired cooking temperature. Turn the knob
to desired temperature and then the thermostat signal
light will turn on (this is not necessary for the pyrolytic
cleaning function)
VISIO DISPLAY
After setting the cooking function and cooking temperature you can set the
desired cooking time through using the minute minder or automatic program.
For setting the clock initially for rst use please go to page 4.
The area around the oven should be well ventilated, close any doors leading into
the area to avoid smells and fumes emanating throughout the house. For duration
of the cycle the oven door will become hot, children should be kept away. If
you have a hob tted above the oven it is advised you do not use it while the
pyrolytic cleaning function is operating, as overheating can occur and cause
damage to both appliances.
At the end of the function the display will show the time of day. The cooling fan will
start up and the oven will remain locked until the oven has cooled. There will be
some ash or residue, this can be wiped up using a damp sponge or cloth.
If there is no activity for 6 hours while the oven is operating, the oven will
automatically turn off.
Sometimes when cooking, condensation may appear on the inner glass of the oven
door. This is normal. Open the oven door slightly so it is on a angle and leave in this
position until the water has dripped down into the dip in the bottom of the cavity.
Wipe the inside of the door with a dry towel.