
ISTRUZIONI DI INSTALLAZIONE / INSTALLATION INSTRUCTION
Per una corretta manutenzione e pulizia di questo
prodotto, raccomandiamo alcuni semplici accorgimenti:
• Utilizzare
detergenti neutri
, spruzzando il prodotto
direttamente su un panno morbido onde evitare
infiltrazioni
• Evitare
sempre
il contatto con prodotti acidi o abrasivi
•
Risciacquare bene
con abbondante acqua per
eliminare eventuali residui ed
asciugare sempre
con un
panno morbido
• Effettuare una
pulizia periodica
al fine di prevenire le
formazioni calcaree
For a proper maintenance and cleaning, we
recommend the following:
• Use
neutral detergents
, avoiding to spray directly
on taps to avoid residual infiltration
•
Avoid
contact with acid or abrasive products
•
Rinse
with water and
always dry
with a clean cloth
to avoid residue of detergent
• Perform a
periodic cleaning
to prevent limestone
deposits
La BELLOSTA CARLO & C. non è RESPONSABILE di
danni derivati dall'utilizzo di prodotti impropri per la
pulizia.
BELLOSTA CARLO & C. cannot be held responsible for
damages due to an improper use of detergents
MANUTENZIONE E PULIZIA MAINTENANCE AND CLEANING
MADE IN ITALY
This product has been entirely manufactured
in Italy, by top quality raw materials.
Questo prodotto è stato realizzato interamente
in Italia con l'utilizzo di materie prime di altissima
qualità
MADE IN ITALY
PER INSTALLAZIONE INCASSO VEDI ISTRUZIONI
914016 PER 2OUT, 034127 PER 3OUT, 034128 PER 4OUT
FOR BUILT-IN PARTS, SEE INSTRUCTIONS
914016 FOR 2OUT, 034127 FOR 3OUT, 034128 FOR 4OUT
2
Rubinetti d'autore Made in Italy
Cod. 635010
Art. 4603/2/1/E
Art. 4603/2/1Q/E
1°
2°
like
Per installatore: Al fine di garantire la durata del prodotto installare rubinetti con filtro da pulire periodicamente.
Effettuare risciacquo delle tubazioni prima di installare il prodotto (PUNTO 1)
Eventuali residui se finissero all'interno della cartuccia potrebbero cusarne il danneggiamento
For installator: In order to guarantee a long duration of the product install valves with filter, which have to be regulary cleaned
(POINT 1). Carry out the rinsing of the pipes before install the tap.
Some external materials may demage the cadrige if not removed before the installation.
1
IMPORTANTISSIMO
Art. 4603/2/1/E
Art. 4603/3/1/E
Art. 4603/4/1/E
RICAMBI / SPARE PARTS
DESIGN
EQB
Art. 4603/2/1Q/E
Art. 4603/3/1Q/E
Art. 4603/4/1Q/E
A
D
COD. 464007
Cod. 635011
Art. 4603/3/1/E
Art. 4603/3/1Q/E
Cod. 635012
Art. 4603/4/1/E
Art. 4603/4/1Q/E
COD. 635011
COD. 635010
COD. 635012
COD. 464007